Journal of Navigation and Port Research (한국항해항만학회지)

Korean Institute of Navigation and Port Research (한국항해항만학회)
권호 표지
DOI QR코드

DOI QR Code

Preliminary Study on Factor Technology of Selective Catalytic Reduction System in Marine Diesel Engine

선박용 디젤엔진 SCR 시스템 요소 기술에 관한 기초 연구

  • Park, Yoon-Yong (Dep. of Naval Architecture and Marine Engineering Mokpo National University) ;
  • Song, Ha-Cheol (Dep. of Naval Architecture and Ocean Engineering Mokpo National University) ;
  • Ahn, Gi-Ju (S&K Heavy Industry Corporation) ;
  • Shim, Chun-Sik (Dep. of Naval Architecture and Ocean Engineering Mokpo National University)
  • 박윤용 (목포대학교 조선해양시스템공학과) ;
  • 송하철 (목포대학교 조선해양공학과) ;
  • 안기주 ((주)S&K중공업) ;
  • 심천식 (목포대학교 조선해양공학과)
  • Received : 2016.07.07
  • Accepted : 2016.08.29
  • Published : 2016.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

From 2016, controls on reduction of NOx and SOx emissions from the vessels that are operated in the emission control area were tightened. The selectivity catalytic reduction system of the denitrification equipment which NOx among the above controlled materials is very effective and used commercially very much. But it has the disadvantage that CSR is activated at high temperatures. Therefore, the SCR and SCR activation instrument that can react even at low temperatures by using micro-nano bubbles so that the above problems can be minimized were developed. And the computational fluid dynamics technique was used by ANSYS-CFX package to prepare the plan that improves the SCR system's efficiency. Simulation for the viscous flow analysis of the SCR system was executed by applying the Navier-Stokes equation to it as a governing equation. For the SCR system's shape, 3D modeling was done by using CATIA V5. SCR jet nozzle's position was checked by changing it to the intervals of 1/3, 1/2, and 2/3 from the inlet of the vent pipe to compare the SCR system's efficiency. And the number of nozzles was compared and analyzed by simulating 4, 6, and 8 holes to check an effect of the number on the SCR system's efficiency. The simulation result has found that the closer nozzles are to the inlet of the vent pipe and the more nozzles are, the more efficiency is improved.

2016년부터 배출통제지역(ECA : Emission Control Atea)을 운항하는 선박에 대하여 배출되는 NOx(질소산화물) 및 SOx(황산화물)의 배기량 감소규제가 강화되었다. 상기의 규제 물질 중 NOx를 제거하는 탈질장비 중 선택적 촉매 환원(SCR : Selectivity Catalytic Reduction) 시스템은 효율이 높고 상업적으로 많이 활용되고 있으나, 높은 온도에서 요소수가 활성화되는 단점이 있다. 이에 초미세기포를 이용하여 낮은 온도에서도 반응할 수 있는 요소수 및 요소수 활성화 기기를 개발하여 상기의 문제점들을 최소화 할 수 있도록 하였다. 또한 SCR 시스템의 효율성을 향상시키는 방안을 마련하기 위하여, ANSYS-CFX package를 이용한 전산유체역학(CFD : Computational fluid dynamics)기법을 사용하였다. Navier-Stokes 방정식을 해석의 지배방정식으로 적용하여 SCR 시스템의 점성유동해석 시뮬레이션을 수행하였다. SCR 시스템의 형상은 CATIA V5를 사용하여 3D 모델링을 하였고, SCR 시스템의 효율성을 비교하기 위해 요소수 분사 노즐의 위치를 요소수 분사 노즐은 배기관의 입구로부터 1/3, 1/2, 2/3로 변경하며 확인하였다. 또한, 노즐의 분사구 수가 SCR 시스템의 효율에 미치는 영향을 확인하기 위하여 분사구 수가 4, 6, 8개일 경우를 시뮬레이션 하여 비교 분석하였다. 시뮬레이션 결과 배기관 입구에 가까울수록, 분사구 수가 많을수록 효율이 향상됨을 확인하였다.

Keywords

References

  1. ANSYS CFD Realrease 12 Tutorial(2008)
  2. Garrido, G. I. Patcas, F. C. Lang, S. and Kraushaar- Czarnetzki. B.(2008) "Mass Transfer and Pressure Drop in Ceramic Foams : A Description for Different Pore Sizes And Porosities, Journall of Chemical Engineering Science", Vol. 63, No. 21, pp. 5202-5217. https://doi.org/10.1016/j.ces.2008.06.015
  3. Kwag. S. H.(2005), "Numerical Simulation of Pipe Flow with an Obstacle by applying Turbulent Models". Journal of the Korean Navigation and Port Research. Vol. 29, No. 6, pp. 523-528. https://doi.org/10.5394/KINPR.2005.29.6.523
  4. Kwag. S. H.(2006), "Flow Analysis in the Fuel Chamber of Engine by Applying Turbulent Models". Journal of Korean Navigation and Port Research. Vol. 30, No. 5, pp. 369-374. https://doi.org/10.5394/KINPR.2006.30.5.369
  5. Lee. J. H., Jung. J. W., Kim. Y. K. and Ko. S. J.(2010) "Representation of Wind Characteristics of Neutral Atmosphere Boundary Layer using k-e Turbulent Model", Journal of the Wind Engineering Institute of Korea Vol. 14, No. 2, pp. 71-78.
  6. Weltens, H. Bressler, H. Terres, F. Neumarier H. and Rammoser. D. (1993). "Optimization of Catalytic Converter Gas Flow Distribution by CFD Distribution". SAE Technical Paper Series 930780. pp. 129-151.
  7. Yi, C. S., Jeong, I. G., Suh, J. S., Park, C. D. and Jeong, K. Y.(2012). "A Numerical Analysis on Flow Uniformity of SCR Reactor for 5,000PS Grade Marine Engine". Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 6, pp. 28-35.