한국압력기기공학회 논문집 (Transactions of the Korean Society of Pressure Vessels and Piping)

한국압력기기공학회 (Korean Society of Pressure Vessels and Piping)
권호 표지
DOI QR코드

DOI QR Code

PGSFR 제어봉집합체 낙하성능시험

Drop Performance Test of Control Rod Assembly for Prototype Gen-IV Sodium-cooled Fast Reactor

  • 투고 : 2016.06.01
  • 심사 : 2016.06.17
  • 발행 : 2016.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The Control Rod Assembly (CRA) controls the reactor power by adjusting its position in the reactor core during normal operation and should be quickly inserted into the reactor core by free drop under scram condition to shut down chain reactions. Therefore, the drop time of the CRA is one of important factors for the safety of the nuclear reactor and must be experimentally verified. This study presents the drop performance test of the CRA which has been conceptually designed for the Proto-type Generation IV Sodium-cooled Fast Reactor. During the test, the CRA was free dropped from a height of 1 m under different flow rate conditions and its drop time was measured. The results showed that the drop time of the CRA increased as the flow rate increased; the average drop times of the CRA were approximately 1.527 seconds, 1.599 seconds and 1.676 seconds at 0%, 100% and 200% of design flow rates, respectively.

키워드

참고문헌

  1. Yeong-il Kim, Jinwook Chang, Yong-Bum Lee, Chan-Bock Lee, Dohee Hahn, 2013, "Status of SFR Development in Korea," International Conference on Fast Reactors and Related Fuel Cycles: Safe Technologies and Sustainable Scenarios (FR13), Paris, France.
  2. M. Anandaraj, P. Anup Kumar, R. Ramakrishna, M. Thirumalai, V. Prakash, C. Anandbabu, P. Kalyanasundaram, and G. Vaidyanathan, 2009, "Online Diverse Safety Rod Drop Time Measurement System for Prototype Fast Breeder Reactor," Proceedings of the National Seminar & Exhibition on Non-Destructive Evaluation, pp. 27-31.
  3. V. Rajan Babu, R. Veerasamy, Sudheer Patri, S. Ignatius Sundar Raj, S.C.S.P. Kumar Krovvidi, S.K. Dash, C. Meikandamurthy, K.K. Rajan, P. Puthiyavinayagam, P. Chellapandi, G. Vaidyanathan and S.C. Chetal, 2010, "Testing and qualification of Control & Safety Rod and its drive mechanism of Fast Breeder Reactor," Nuclear Engineering and Design, Vol. 240, pp. 1728-1738. https://doi.org/10.1016/j.nucengdes.2010.02.037
  4. R. Vijayashree, R. Veerasamy, Sudheer Patri, P. Chellapandi, G. Vaidyanathan, S.C. Chetal and Baldev Raj, 2010, "Design, Development, Testing and Qualification of Diverse Safety Rod and Its Drive Mechanism for a Prototype Fast Breeder Reactor," Journal of Engineering for Gas Turbines and Power, Vol. 132, pp. 102921-1-102921-9. https://doi.org/10.1115/1.4001059
  5. V.Rajan Babu, G. Thanigaiyarasu and P. Chellapandi, 2014, "Mathematical modelling of performance of safety rod and its drive mechanism in sodium cooled fast reactor during scram action," Nuclear Engineering and Design, Vol. 278, pp. 601-617. https://doi.org/10.1016/j.nucengdes.2014.08.015