DOI QR코드

DOI QR Code

Analytical method for the out-of-plane buckling of the jib system with middle strut

  • Wang, T.F. (School of Mechatronics Engineering, Harbin Institute of Technology) ;
  • Lu, N.L. (School of Mechatronics Engineering, Harbin Institute of Technology) ;
  • Lan, P. (School of Mechatronics Engineering, Harbin Institute of Technology)
  • 투고 : 2015.02.18
  • 심사 : 2016.07.01
  • 발행 : 2016.08.10

초록

The jib system with middle strut is widely used to achieve the large arm length in the large scale tower crane and the deployability in the mobile construction crane. In this paper, an analytical solution for the out-of-plane buckling of the jib system with middle strut is proposed. To obtain the analytical expression of the buckling characteristic equation, the method of differential equation was adopted by establishing the bending and torsional differential equation of the jib system under the instability critical state. Compared with the numerical solutions of the finite element software ANSYS, the analytical results in this work agree well with them. Therefore, the correctness of the results in this work can be confirmed. Then the influences of the lateral stiffness of the cable fixed joint, the dip angle of the strut, the inertia moment of the strut, and the horizontal position of the cable fixed joint on the out-of-plane buckling behavior of the jib system were investigated.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. De Araujo, R.R., De Andrade, S.A.L., Vellasco, P.D.S., Da Silva, J.G.S. and De Lima, L.R.O. (2008), "Experimental and numerical assessment of stayed steel columns." J. Constr. Steel Res., 64(9), 1020-1029. https://doi.org/10.1016/j.jcsr.2008.01.011
  2. El-Ghazaly, H.A. and Al-Khaiat, H.A. (1995), "Analysis and design of guyed transmission towers-Case study in Kuwait", Comput. Struct., 55(3), 413-431. https://doi.org/10.1016/0045-7949(95)98868-Q
  3. GB/T 13752-2008 (2008), Design rules for tower crane; Standards Press of China, Beijing. [In Chinese]
  4. Hangai, Y. and Wu, M. (1999), "Analytical method of structural behaviours of a hybrid structure consisting of cables and rigid structures", Eng. Struct., 21(8), 726-736. https://doi.org/10.1016/S0141-0296(98)00027-3
  5. Hosozawa, O., Shimamura, K. and Mizutani, T. (1999), "The role of cables in large span spatial structures: introduction of recent space structures with cables in Japan", Eng. Struct., 21(8), 795-804. https://doi.org/10.1016/S0141-0296(98)00032-7
  6. Lan, P., Wang, T.F. and Lu, N.L. (2014), "Out-of-plane stability analysis for crane jib with single cable considering lateral flexibility of the cable fixed joint", Proceedings of the 4th International Conference on Mechanical Engineering, Industry and Manufacturing Engineering, Beijing, China, October.
  7. Li, W., Zhao, J., Jiang, Z., Chen, W. and Zhou, Q. (2015), "A numerical study of the overall stability of flexible giant crane booms", J. Constr. Steel Res., 105, 12-27. https://doi.org/10.1016/j.jcsr.2014.10.006
  8. Lu, N.L., Wang, T.F. and Lan, P. (2014), "Calculation and analysis of whole stability in two hanging point horizontal arm rotation plane of tower crane", Constr. Mach., 9, 90-94. [In Chinese]
  9. Saito, D. and Wadee, M.A. (2009), "Buckling behaviour of prestressed steel stayed columns with imperfections and stress limitation", Eng. Struct., 31(1), 1-15. https://doi.org/10.1016/j.engstruct.2008.07.006
  10. Timoshenko, S.P. and Gere, J.M. (1961), Theory of Elastic Stability, (2nd Edition), McGraw-Hill, New York, NY, USA.
  11. Wakefield, D.S. (1999), "Engineering analysis of tension structures: Theory and practice", Eng. Struct., 21(8), 680-690. https://doi.org/10.1016/S0141-0296(98)00023-6
  12. Wang, T.F., Lan, P. and Lu, N.L. (2015), "Out-of-plane stability analysis of crane jib with auxiliary bracing", Advanced Materials Research: Proceedings of 2014 International Conference on Machine, Energy, Chemistry and Applied-Information Technology, Hefei, China, November.
  13. Wen, S.R., Lan, P. and Lu, N.L. (2013), "Stability analysis for horizontal boom with double pulling rods under non-conservative forces", Proceedings of the 3rd International Conference on Mechanical Engineering, Industry and Manufacturing Engineering, Wuhan, China, June.
  14. Wu, M. (2008), "Analytical method for the lateral buckling of the struts in beam string structures", Eng. Struct., 30(9), 2301-2310. https://doi.org/10.1016/j.engstruct.2008.01.008
  15. Xue, W. and Liu, S. (2010), "Linear elastic and limit state solutions of beam string structures by the Ritzmethod", Struct. Eng. Mech., Int. J., 35(1), 67-82. https://doi.org/10.12989/sem.2010.35.1.067
  16. Yoo, H. and Choi, D.H. (2009), "Improved system buckling analysis of effective lengths of girder and tower members in steel cable-stayed bridges", Comput. Struct., 87(13), 847-860. https://doi.org/10.1016/j.compstruc.2009.01.010

피인용 문헌

  1. Multi-Beams modelling for high-rise buildings subjected to static horizontal loads vol.75, pp.3, 2020, https://doi.org/10.12989/sem.2020.75.3.283
  2. Analytical method for the out-of-plane buckling of the telescopic boom with guy cables vol.104, pp.1, 2016, https://doi.org/10.1177/0036850420984330