DOI QR코드

DOI QR Code

Simple Routing Control System for 10 Gb/s Data Transmission Using a Frequency Modulation Technique

  • Omoto, Daichi (Department of Electronic Systems Engineering, The University of Shiga Prefecture) ;
  • Kishine, Keiji (Department of Electronic Systems Engineering, The University of Shiga Prefecture) ;
  • Inaba, Hiromi (Department of Electronic Systems Engineering, The University of Shiga Prefecture) ;
  • Tanaka, Tomoki (Department of Electronic Systems Engineering, The University of Shiga Prefecture)
  • Received : 2016.03.30
  • Accepted : 2016.06.16
  • Published : 2016.06.30

Abstract

This paper describes a simple routing control system. We propose achieving high-speed data transmission without modifying the data frame configuration. To add a routing control signal, called the "labeling signal" in this paper, to the data frame, we use a frequency modulation technique on the transmitted frame. This means you need not change the data frame when you transmit additional signals. Using a prototype system comprising a field-programmable gate array and discrete elements, we investigate the system performance and devise a method to achieve high resolution. A three-channel routing control for a 10 Gb/s data frame was achieved, which confirms the advantages of the proposed system.

Keywords

References

  1. Antonio Rodriguez-Moral, et al., "Optical Data Networking: Protocols, Technologies, and Architectures for Next Generation Optical Transport Networks and Optical Internetworks," Journal of Lightwave Technology, Vol. 18, No. 12, December 2000.
  2. S. Suzuki, et al., "R & D on the Digital Coherent Signal Processing Technology for Large-capacity Optical Communication Networks," Technical Report of IEICE, vol.95, No.12, pp.1100-1116, December 2012.
  3. A. G. Malis and W. A. Simpson, "PPP over SONET/SDH," RFC-2615, June 1999.
  4. H. Toyoda, et al., "Signal Transmission and Coding Architecture for Next-Generation Ethernet," Trans. Inf. & Syst., vol.E86-D, No.11, pp.2317-2324, November 2003.
  5. "Network Node interface for the synchronous digital hierarchy," ITU-T Recommendation G. 707, 2007.
  6. IEEE Std. 802.3bk-2013.
  7. D. Omoto, et al., "Labeling Signal Detecting Circuit Using a Delay Detection Circuit," The Institute of Electronics, Information and Communication Engineers, p. 25, 2014.
  8. T. Fujiwara, et al., "Low-power wireless pH sensing FM transmitter IC with Ion Sensitive Field Effect Transistor," The Institute of Electronics, Information and Communication Engineers, p. 111, 2010.
  9. M. Hirose, et al., "A high-gain and wide-band FM demodulator IC for optical video transmission systems employing optical heterodyne AM/FM converter," Technical Report of IEICE, CAS96-115, DSP96-166, CS96-171, pp.111-117, 1997.