DOI QR코드

DOI QR Code

Effect of Carbides on the Tensile Properties of 0.5C-17Cr-0.5Ni Martensitic Stainless Steel

0.5C-17Cr-0.5Ni 마르텐사이트계 스텐인리스강의 인장성질에 미치는 탄화물의 영향

  • Kwon, Soon-Doo (Department of Metallurgical Engineering, Pukyong National University) ;
  • Son, Dong-Wook (Department of Industrial Facility Automation, Korea Polytechnic(7)college, Changwon Campus) ;
  • Kang, Chang-Yong (Department of Metallurgical Engineering, Pukyong National University)
  • 권순두 (부경대학교 금속공학과) ;
  • 손동욱 (한국폴리텍대학 창원캠퍼스 산업설비 자동화과) ;
  • 강창룡 (부경대학교 금속공학과)
  • Received : 2015.09.10
  • Accepted : 2016.05.09
  • Published : 2016.06.30

Abstract

The effect of carbides on the tensile properties in 0.5C-17Cr-0.5Ni martensitic stainless steel was studied. With the increase of austenitizing temperature, the volume fraction of residual carbide was decreased rapidly. In tempered specimens after quenching, the volume fraction of total carbide was decreased with the increase of austenitizing temperature. In tempered specimens after quenching, strength was decrease and elongation was increased with the increase of austenitizing temperature. Tensile strength was increase and elongation was decreased with the increase of volume fraction of residual and total carbides. With the increase of austenitizing temperature, the tensile properties of mod. 0.5C-17Cr-0.5Ni martensitic stainless was affected greatly by residual carbide than tempered carbide.

Keywords

References

  1. M. Hasegawa, 1992, "Handbook of stainless steel (III practical materials)", Sewa, Seoul, pp. 369-402.
  2. T. Zinkai, 1989, "Usage of stainless steels", Part of speciality steel, pp. 158-1597.
  3. Y. J. Kim, D. W. Joo, S. H. Park, G. D. Kim and J. H. Sung, 1994, "Influence of Austenitizing Condition on the Mechanical Properties in 420J1 Martensitic Stainless Steel", J. of the Korean Society for heat Treatment, Vol. 7, No. 1, pp. 25-34.
  4. Y. C. Kim, B. H. Jung and C. Y. Kang, 2011, "The Effect of Alloying Elements and Heat Treatment on the Intergranual Corrosion of 440A Martensitic Stainless Steel", J. of the Korean Society for Power System Engineering, Vol. 15, No. 3, pp. 52-57. https://doi.org/10.9726/kspse.2011.15.3.052
  5. Y. C. Kim, C. Y. Kang and B. H. Jung, 2011, "The Effect of Alloying Elements and Heat Treatment on the Uniform Corrosion of 440A Martensitic Stainless Steel", J. of the Korean Society for Power System Engineering, Vol. 15, No. 4, pp. 42-48.
  6. K. Fujita, 1970, "Heat treatment of stainless steels", Nikkan Kogyo Shimbun, Ltd., pp. 19-78.
  7. Y. G. Kim, Y. J. Kim, G. D. Kim, J. H. Sung, 1992, "Influence of Austenitizing Temperature on the Mechanical Properties in 420J2 Martensitic Stainless Steel", J. of the Korean Society for heat Treatment, Vol. 5, No. 2, pp. 111-121.