References
- ACI Committee 318 (2005) Building Code Requirements for Structural Concrete(ACI 318-05) and Commentary(ACI 318R-05), American Concrete Institute.
- AISC (2005) Seismic Provisions for Structural Steel Buildings(ANSI/AISC 341-05), Chicago(IL): American Institute of Steel Construction.
- AISC (2005) ANSI/AISC 360-05 Specification for Structural Steel Buildings, American Institute of Steel Construction.
- ASCE 7-05 (2005) Minimum Design Loads for Buildings and other Structures, SEI/ASCE Standard No.7-05, ASCE.
- Bruneau, M., Uang, C. M., Sabelli, R. (1997) Ductile Design of Steel Structures, McGraw-Hill.
- Choi, S.W., Park, H.S. (2102) Multi-objective Seismic Design Method for Ensuring Beam-hinging Mechanism in Steel Frames, J. Constr. Steel Res., 74, pp.17-25.
- Choi, S.W., Yang, H.J., Park, H.S. (2010) Development of Optimal Seismic Design Model for Inverted V-type Special Concentrically Braced Frames, J. Comput. Struct. Eng. Inst. Korea, 23, pp.111-120.
- Deb, K., Pratap, A., Agarwal, S., Meyarivan, T. (2002) A Fast and Elitist Multiobjective Genetic Algorithm: NSGA-II, IEEE Trans. Evol. Comput., 6, pp.182-197. https://doi.org/10.1109/4235.996017
- Dooley, L., Bracci, J.M. (2001) Seismic Evaluation of Column-to-Beam Strength Ratios in Reinforced Concrete Frames, ACI Struct. J., 98, pp.834-851.
- FEMA 355C (2000) State of the Art Report on Systems Performance of Steel Moment Frames Subject to Earthquake Ground Shaking, Federal Emergency Management Agency.
- FEMA 356 (2000) Prestandard and Commentary for the Seismic Rehabilitation of Buildings, Federal Emergency Management Agent.
- Foutch, D.A. Yun, S. (2002) Modeling of Steel Moment Frames for Seismic Loads, J. Constr. Steel Res., 58, pp.529-564. https://doi.org/10.1016/S0143-974X(01)00078-5
- Gupta A., Krawinkler, H. (1999) Seismic Demands for Performance Evaluation of Steel Moment Resisting Frame Structures. The John A. Blume Earthquake Engineering Center, Report No.132.
- Hasan, R., Xu, L. Grierson, D.E. (2002) Push-over Analysis for Performance-based Seismic Design, Comput. & Struct., 80, pp.2483-2493. https://doi.org/10.1016/S0045-7949(02)00212-2
- Krawinkler, H., Mohasseb, S. (1987) Effects of Panelzone Deformations on Seismic Response, J. Constr. Steel Res., 8, pp.233-250. https://doi.org/10.1016/0143-974X(87)90060-5
- Kuntz, G.L., Brouning, J. (2003) Reduction of Column Yielding during Earthquakes for Reinforced Concrete Frames, ACI Struct. J., 100, pp.573-580.
- Lee, H. (1996) Revised Rule for Concepts of Strong-Column Weak-Girder Design, J. Struct. Eng., 122, pp.359-364. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:4(359)
- Medina, R.A., Krawinkler, H. (2005) Strength Demand Issues Relevant for the Seismic Design of Moment-resisting Frames, Earthq. Spectra, 21, pp.415-439. https://doi.org/10.1193/1.1896958
- Nakashima, M., Sawaizumi, S. (2000) Column-to-Beam Strength Ratio Requied for Ensuring Beam- Collapse Mechanisms in Earthquake Responses of Steel Moment Frames, Proc. 12th World Conf. Earthq. Eng..
- Oh, B.K., Choi, S.W., Kim, Y., Jo, D.J., Park, H.S. (2014) An Analytical Study on System Identification of Steel Beam Structure for Buildings based on Modified Genetic Algorithm, J. Comput. Struct. Eng. Inst. Korea, 27, pp.231-238. https://doi.org/10.7734/COSEIK.2014.27.4.231
- Park, R., Paulay, T. (1975) Reinforced Concrete Structure, John Wiley and Sons.