참고문헌
- H. Hasemann, G. Weser, D. Hagelstein, M. Rautenberg, Investigation of the solidity and the blade vibration behaviour of unshrouded centrifugal compressor impellers with different aerodynamic design, in: Proceedings of the 42nd International Gas Turbine and Aeroengine Congress and Exhibition of the ASME, ASME-Paper 97-GT233, Orlando, FL, USA, 2-5 June, 1997.
- H. Hasemann, D. Hagelstein, M. Rautenberg, Coupled vibration of unshrouded centrifugal compressor impellers, part 1: experimental investigation, in: Proceeding of the 7th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC-7, Honolulu, Hawaii, USA, 22-26 February, vol. C, 1998, pp. 1295-1305.
- D. Hagelstein, H. Hasemann, M. Rautenberg, Coupled vibration of unshrouded centrifugal compressor impellers, part 2: computation of vibration behavior. in: Proceeding of the 7th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISRO-MAC-7, Honolulu, Hawaii, USA, 22-26 February, vol. C, 1998, pp. 1306-1317.
- H. Hasemann, A. Oberrohrmann, D. Hagelstein, M. Rautenberg, Investigation of the solidity and the blade vibration behaviour of radial compressor impellers due to a significant reduction of the hyperbolic undercut in the flankmilling process, in: Proceedings of the Yokohama International Gas Turbine Congress, Yokohama, Japan, 22-27 October, 1995.
- M. Rautenberg, A. Engeda, W. Wittekindt, Mathematical formulation of blade surfaces in turbomachinery. Part I: theoretical surface formulations, in: Proceedings of the 34th ASME International Gas Turbine and Aeroengine Congress and Exposition, ASME-Paper No. 89-GT-160, Toronto, Ontario, Canada, 4-8 June, 1989.
- Guo S, Maruta Y. Experimental investigation on pressure fluctuations and vibration of the impeller in a centrifugal pump with vaned diffusers. JSME Int. J. Ser. B 2005;48(1).
- Rodrigues C, Egusquiza E, Santos I. Frequencies in the vibration induced by rotor stator interaction in a centrifugal pump turbine. J. Fluids Eng. Trans. ASME 2007;129(11)1428-35. https://doi.org/10.1115/1.2786489
- Jiang Y, Yoshimura S, Imai R, Katsura H, Yoshida T, Kato C. Quantitative evaluation of flow-induced structural vibration and noise in turbomachinery by full-scale weakly coupled simulation. J. Fluids Struct. 2007;23:531-44. https://doi.org/10.1016/j.jfluidstructs.2006.10.003
- Khalifa Atia E, Al-Qutub Amro M, Ben-Mansour Rached. Study of pressure fluctuations and induced vibration at blade-passing frequencies of a double volute pump. Arab. J. Sci. Eng. 2011;36(7)1333-45. https://doi.org/10.1007/s13369-011-0119-8
- Wang J f, Jorge OY, Norbert M. Strength and dynamic characteristics analyses of wound composite axial impeller. Cent. Eur. J. Eng. 2012;2(1)104-12. https://doi.org/10.2478/s13531-011-0053-2
- R.J. Yang, L. Gu, Application of descriptive sampling and meta-modeling methods for optimal design and robustness of vehicle structures, The 43rd Structures. Structural Dynamics and Materials Conference, United States, AIAA, 2002, pp. 1-7.
- Maglaras G, Ponslet E, Haftka R.T. et al. Analytical and experimental comparison of probabilistic and deterministic optimization. AIAA J. 1996;34(7), 1512-8. https://doi.org/10.2514/3.13261
- Jin R, Chen W, Simpson TW. Comparative studies of metamodeling techniques under multiple modeling critieria. Struct. Multidisc. Optim. 2001;23:1-13. https://doi.org/10.1007/s00158-001-0160-4
- Mullur AA, Messac A. Extended radial basis functions:more flexible and effective meta-modeling. AIAA J. 2005;43(6)1306-15. https://doi.org/10.2514/1.11292
- Wang GG. Adaptive response surface method using inherited Latin hypercube design points. J. Mech. Des. 2003;125(2)210-20. https://doi.org/10.1115/1.1561044
- G.P. Liu, X. Han, A micro multi-objective genetic algorithm for multi-objective optimizations, in: Proceedings of the Fourth China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems, Kunming, China, pp. 419-424, 2006.
- GB/T 1634.2-2004 Plastics-Determination of temperature of deflection under load-Part 2: Plastics, ebonite and long-fibre-reinforced composites.
- GB/T 2573-2008 Test method for aging properties of glass fiber reinforced plastics.
- GB/T 1449-2005 Fibre-reinforced plastic composites-Determination of flexural properties.
- Billings SA, Zheng GL. Radial basis function networks configuration using genetic algorithms. IEEE Trans. Neural Netw. 1995;8(6)877-90. https://doi.org/10.1016/0893-6080(95)00029-Y
- Huang DS. Application of generalized radial basis function networks to recognition of radar targets. Int. J. Pattern Recognit. Artif. Intell. 1999;13(6)945-62. https://doi.org/10.1142/S0218001499000525
- Basak J, Mitra S. Feature selection using radial basis function networks. Neural Comput. Appl. 1999;8(4)297-302. https://doi.org/10.1007/s005210050035
- Jin R, Chen W, Simpson TW. Comparative studies of metamodelling techniques under multiple modelling criteria. Struct. Multidiscip. Optim. 2001;23(1)1-13. https://doi.org/10.1007/s00158-001-0160-4
- W.B. Zhao, D.S. Huang, The Structure Optimization of Radial Basis Probabilistic Neural Networks Based on Genetic Algorithms, in: WCCI2002 (IJCNN 2002), Hilto Hawaiian Village Hotel, Honolulu, Hawaii, 2002, pp. 1086-1091.
- Queipo NV, Haftka RT, Shyy, W, et al. Surrogate-based analysis andoptimization. Prog. Aerosp. Sci. 2005;41(1)1-28. https://doi.org/10.1016/j.paerosci.2005.02.001
- Sandgren E, Cameron TM. Robust design optimization of structures through consideration of variation. Comput. Struct. 2002;80(20-21)1605-13. https://doi.org/10.1016/S0045-7949(02)00160-8
- Koch PN, Yang RJ, Gu L. Design for six sigma through robust optimization. Struct. Multi-disc. Optim. 2004;26:235-248. https://doi.org/10.1007/s00158-003-0337-0
- Li YQ, Cui ZS, Chen, J, et al. Six sigma robustdesign methodology based on dual response surface model. J. Mech. Strength, 2006;28(5)690-4.
- Li TZ, Li GY, Chen, T, et al. Robustness design of occupant restraint system based on Kriging model. Chin. J. Mech. Eng. 2010;46(22)123-9.
- Crowder SV, Moyer R. A two-stage monte carlo approach to the expression of uncertainty with non-linear measurement equation and small sample size. Metrologia 2006;43.
- Cox MG, Siebert BRL. The use of a Monte Carlo method for evaluating uncertainty and expanded uncertainty. Metrologia. 2006;43:S178-88. https://doi.org/10.1088/0026-1394/43/4/S03
- Esward TJ, et al. A Monte Carlo method for uncertainty evaluation implemented on a distributed computing system. Metrologia 2007;44.
- Ivan D, Rayna G. Monte Carlo method for numerical integration based on Sobol's sequences. Numer. Methods Appl. 2011;60(46)50-9.
- Wang Y, Tao Z, Du FR, Hao Yong. Response analysis of fluid and solid coupling characteristics for a wide-chord hollow fan blade. J. Aerosp. Power 2008;23:2177-83.
- T. Cui, W.H. Zhang, Study on safety of trains passing by each other at high-speed based on fluid-structure interaction vibration, in: Proceedings of the 1st International Conference on Transportation Information and Safety (ICTIS2011), Wuhan, China, 2011.
- Zhang Q, Toshiaki H. Studies of the strong coupling and weak coupling methods in FSI analysis. Int. J. Numer. Methods Eng. 2004;60(12)2013-29. https://doi.org/10.1002/nme.1034
- Hu SL, Lu CJ, He YS. Numerical anslysis of fluid-structual interaction vibration for plate. J. Shanghai Jiao Tong Univ. 2013;47(1)1487-93.
- Goel T, Stander N. Comparing three error criteria for selecting radial basis function network topology. Comput. Methods Appl. Mech. Eng. 2009;198(27-29)2137-50. https://doi.org/10.1016/j.cma.2009.02.016
- JB/T6445-2005 Overspeed test for industrial fan impeller.
피인용 문헌
- Fluid Genetic Algorithm (FGA) vol.4, pp.2, 2016, https://doi.org/10.1016/j.jcde.2017.03.001
- Design and optimization of an RFID-enabled passport tracking system vol.5, pp.1, 2016, https://doi.org/10.1016/j.jcde.2017.06.002
- 𝜖-constraint heat transfer search (𝜖-HTS) algorithm for solving multi-objective engineering design problems vol.5, pp.1, 2016, https://doi.org/10.1016/j.jcde.2017.06.003
- Robust optimal usage modeling of product systems for environmental sustainability vol.6, pp.3, 2016, https://doi.org/10.1016/j.jcde.2018.08.005
- Fuzzy multivariate mean square error in equispaced pareto frontiers considering manufacturing process optimization problems vol.35, pp.4, 2019, https://doi.org/10.1007/s00366-018-0660-0