Composites Research

The Korean Society for Composite Materials (한국복합재료학회)
권호 표지
DOI QR코드

DOI QR Code

Comparison of Mechanical and Interfacial Properties on Chemical Structures of Acrylic and Epoxy Adhesives

아크릴 및 에폭시 접착제의 화학적 구조에 따른 유리섬유 복합재료의 기계적 및 계면 물성 변화 평가

  • Shin, Pyeong-Su (Department of Materials Engineering and Convergence Technology, Gyeongsang National University) ;
  • Kim, Jong-Hyun (Department of Materials Engineering and Convergence Technology, Gyeongsang National University) ;
  • Choi, Jin-Yeong (Department of Materials Engineering and Convergence Technology, Gyeongsang National University) ;
  • Kwon, Dong-Jun (Department of Materials Engineering and Convergence Technology, Gyeongsang National University) ;
  • Lee, Sang-Il (Wind Turbine Development & Engineering Team, Doosan Heavy Industries & Construction) ;
  • Park, Joung-Man (Department of Materials Engineering and Convergence Technology, Engineering Research Institute, Gyeongsang National University)
  • Received : 2016.01.18
  • Accepted : 2016.04.29
  • Published : 2016.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

An adhesive can be used to connect two different materials in structures. In comparing with other connecting methods, such as bolt, rivet, and hot melting, the adhesive does not need to use them. It leads to reduce the weight and decrease the stress concentration along the connecting line. This work studied the comparison of mechanical and interfacial properties of commonly-used two adhesives, acrylic type and bisphenol-A epoxy type. Tensile and flexural strength of neat adhesives were also compared. Lap shear test of two adhesives was deduced from the measurement of tensile and fatigue tests. After testing, the failure patterns of adhesive surfaces were observed by a microscope. Tensile strength and mechanical fatigue resistance at using bisphenol-A epoxy adhesive were better than acrylic adhesive. Also adding CNT reinforcement in epoxy adhesive can anticipate mechanical improvement.

접착제는 구조물에 두 가지 복합재료를 연결하는 데 사용된다. 과거의 연결방식인 볼트, 리벳, 그리고 핫 멜트 방식과는 다르게 접착제의 경우 위와 같은 재료를 필요로 하지 않는다. 이는 복합재료의 경량화 및 연결부위로 인한 응력 집중점이 없다는 장점이 있다. 본 연구에서는 아크릴계 및 비스페놀-A형 에폭시계 접착제, 더 나아가 탄소나노튜브 강화재를 투입했을 때에 기계적 및 계면특성을 파악하였다. 접착제 자체의 기계적 강도 변화를 보았고, 전단 및 전단 피로실험을 통하여 물리적 특성을 파악하였다. 전단 실험 후에 파단면을 반사현미경을 통하여 관찰하였다. 실험결과 비스페놀-A계 에폭시 접착제를 사용했을 때의 인장강도 및 기계적 피로 저항성이 아크릴 접착제 보다 좋은 것을 확인했다. 또한 탄소나노튜브 입자를 에폭시 접착제에 첨가했을 때 기계적 향상을 확인했다.

Keywords

References

  1. Johnson, S., "Thermoelastic Stress Analysis for Detecting and Characterizing Dtatic Damage Initiation in Composite Lap Shear Joints," Composites: Part B, Vol. 56, 2014, pp. 740-748. https://doi.org/10.1016/j.compositesb.2013.09.014
  2. Almansour, A., Maillet, E., Ramasamy, S., and Morscher, G.N., "Effect of Fiber Content on Single Tow SiC Minicomposite Mechanical and Damage Properties using Acoustic Emission," Journal of the European Ceramic Society, Vol. 35, 2015, pp. 3389-3399. https://doi.org/10.1016/j.jeurceramsoc.2015.06.001
  3. Njuhovic, E., Brau, M., Wolff-Fabris, F., Starzynski, K., and Alstadt, V., "Identification of Failure Mechanisms of Metallised Glass Fibre Reinforced Composites under Tensile Loading using Acoustic Emission Analysis," Composites Part B, Vol. 81, 2015, pp. 1-13. https://doi.org/10.1016/j.compositesb.2015.06.018
  4. Lee, Y.H., Lim, D.W., Choi, J.H., Kweon, J.H., and Yoon, M.K., "Failure Load Evaluation and Prediction of Hybrid Composite Double Lap Joints," Composites Structures, 2010, Vol. 92, pp. 2916-2926. https://doi.org/10.1016/j.compstruct.2010.05.002
  5. Kim, H.C. and Lee, J.J., "The Effects of Interfacial Adhesion Strength on the Characteristics of an Aluminum/CFRP Hybrid Beam under Transverse Quasi-Static Loading," Composites: Part B, Vol. 67, 2014, pp. 595-606. https://doi.org/10.1016/j.compositesb.2014.06.017
  6. Kim, C.H., Choi, J.H., and Kweon, J.H., "Defect Detection in Adhesive Joints using the Impedance Method," Composite Structures, Vol. 120, 2015, pp. 183-188. https://doi.org/10.1016/j.compstruct.2014.09.045
  7. Maglhaes, A.G. and Moura, M.F.S.F., "Application of Acoustic Emission to Study Creep Behavior of Composite Bonded Lap Shear Joints," NDT&E International, Vol. 38, 2005, pp. 45-52. https://doi.org/10.1016/j.ndteint.2004.06.005
  8. Okayasu, M., Yamazaki, T., Ota, O., Ogi, K., and Shiraishi, T., "Mechanical Properties and Failure Characteristics of a Recycled CFRP under Tensile and Cyclic Loading," International Journal of Fatigue, Vol. 55, 2013, pp. 257-267. https://doi.org/10.1016/j.ijfatigue.2013.07.005
  9. Schizas, C., Stutz, S., and Coric D., Monitoring of non-Homogeneous Strains in Composites with Embedded Wavelength Multiplexed Fiber Bragg Gratings: A Methodological Study," Composite Structures, Vol. 94, 2012, pp. 987-994. https://doi.org/10.1016/j.compstruct.2011.09.014
  10. Gigliotti, M., Lafarie-Frenot, M.C., Lin, Y., and Pugliese, A., "Electro-Mechanical Fatigue of CFRP Laminates for Aircraft Applications," Composite Structures, Vol. 127, 2015, pp. 436-449. https://doi.org/10.1016/j.compstruct.2015.01.023
  11. Haj, A.R. and Elhajjar, Rani, "An Infrared Thermoelastic Stress Analysis Investigation of Single Lap Shear Joints in Continuous and Woven Carbon/Fiber Epoxy Composites," International Journal of Adhesion & Adhesives, Vol. 48, 2014, pp. 210-216. https://doi.org/10.1016/j.ijadhadh.2013.09.013
  12. Mactabi, R., Rosca, I.D., and Hoa, S.V., "Monitoring the Integrity of Adhesive Joints during Fatigue Loading Using Carbon Nanotubes," Composites Science and Technology, Vol. 78, 2013, pp. 1-9. https://doi.org/10.1016/j.compscitech.2013.01.020
  13. Lim, A.S., Melrose, Z.R., Thostenson, E.T., and Cheu, T.W., "Damage Sensing of Adhesively-Bonded Hybrid Composite/Steel Joints using Carbon Nanotubes," Composites Science and Technology, Vol. 71, 2011, pp. 1183-1189. https://doi.org/10.1016/j.compscitech.2010.10.009
  14. Matsuzaki, R., Shibata, M., and Todoroki, A., "Reinforcing an Aluminum/GFRP co-cured Single Lap Joint using Inter-Adherend Fiber," Composites Part A: Applied Science and Manufacturing, Vol. 39, 2008, pp. 786-795. https://doi.org/10.1016/j.compositesa.2008.02.002
  15. Jang, J.H., Yi, J.W., Lee, W.O., Lee, H.G., Um, M.K., Kim, J.B., and Byun, J.H., "Dispersion and Property Evaluation of Nanocompositesby Aspect Ratio of MWCNT," Journal of the Korean Society for Composite Materials, Vol. 23, No. 3, 2010, pp. 58-63. https://doi.org/10.7234/kscm.2010.23.3.058
  16. Kwon, D.J., Wang, Z.J., Kim, J.J., Jang, K.W., and Park, J.M., "Prediction Method of Dispersion Condition for Reinforced Epoxy in Nano SiC Particles Using Capacitance Measurement," Journal of the Korean Society for Composite Materials, Vol. 26, No. 6, 2013, pp. 337-342.
  17. Kwon, D.J, Wang, Z.J., Choi, J.Y., Lee, E.S., and Park, J.M., "Investigation of Interfacial Adhesion of Different Shapes of Nano Carbon Fillers Reinforced Glass Fiber/Epoxy Composites by Spray Coating," Journal of the Korean Society for Composites Materials, Vol. 27, No. 3, 2014, pp. 109-114.

Cited by

  1. CFRP/금속간 접합력 강화를 위한 접합공정 연구 vol.30, pp.6, 2017, https://doi.org/10.7234/composres.2017.30.6.416