DOI QR코드

DOI QR Code

자가중합 임시치관용 레진의 표면 처리에 따른 색 안정성

Color Stability of Self-Cured Temporary Crown Resin according to Different Surface Treatments

  • 박지원 (한서대학교 치위생학과) ;
  • 배성숙 (한서대학교 치위생학과)
  • Park, Ji-Won (Department of Dental Hygiene, Hanseo University) ;
  • Bae, Sung-Suk (Department of Dental Hygiene, Hanseo University)
  • 투고 : 2016.01.21
  • 심사 : 2016.02.18
  • 발행 : 2016.04.30

초록

이번 연구는 자가중합 임시치관용 레진의 표면 처리와 음식에 따른 색 안정성 확인을 위해 설계되었으며 ethyl methacrylate형의 SNAP 시편에 denture bur polishing, silicone bur polishing, pumice polishing의 3단계 표면 처리 후 커피와 콜라, 된장과 고추장, 레드 와인과 맥주에 침전한 블럭을 분광광도계로 관찰하여 초기 값과 비교한 ${\Delta}E^*$값을 알아보았다. 모든 시편에서 침전 시간과 표면 처리에 따라 나타난 착색의 차이는 시간의 변화에 따라 색 변화가 관찰되었다(p<0.001). 커피는 1일($2.59{\pm}1.08$), 5일($3.89{\pm}0.83$), 7일($4.53{\pm}0.22$) 모두 pumice polishing이 색 변화가 가장 많았다. 콜라는 1일($2.53{\pm}0.55$)과 5일($4.75{\pm}0.94$) pumice polishing이 색 변화가 가장 많았고, 7일($5.28{\pm}0.25$)은 denture bur polishing이 색 변화가 가장 많았다. 고추장은 1일($6.38{\pm}0.61$)과 5일($10.4{\pm}7.58$) silicone bur polishing이 색 변화가 가장 많았고 7일($12.44{\pm}2.82$)은 denture bur polishing이 색 변화가 가장 많았다. 반면 pumice polishing에서는 1일($6.09{\pm}1.03$), 5일($4.9{\pm}2.37$), 7일($5.33{\pm}0.64$) 모두 색 변화가 가장 적게 나타났다. 된장은 1일($1.37{\pm}0.35$)과 7일($4.98{\pm}0.55$)은 pumice polishing이 색 변화가 많았으며, 5일($2.61{\pm}0.38$)은 denture bur polishing이 색 변화가 가장 많았다. 레드 와인은 denture bur polishing이 1일($4.78{\pm}1.10$), 5일($12.69{\pm}3.06$), 7일($13.48{\pm}2.08$) 모두 색 변화가 가장 많았고, pumice polishing에서 1일($2.66{\pm}0.39$), 5일($8.56{\pm}0.16$), 7일($8.77{\pm}0.22$) 모두 색 변화가 가장 적게 나타났다, 맥주는 pumice polishing이 1일($4.15{\pm}0.47$), 5일($4.12{\pm}0.37$), 7일($4.53{\pm}0.89$) 모두 색 변화가 가장 많았으며 반면 silicone bur polishing이 1일($1.27{\pm}1.1$), 5일($2.3{\pm}0.32$), 7일($2.48{\pm}0.46$) 모두 색 변화가 가장 적게 나타났다. 이와 같이 자가중합 레진의 임시치관 색 안정성 제공을 위해 음식 섭취에 대한 주의가 필요하다. 선호 음식의 종류에 따라 표면 처리 방법을 선택할 수 있으며, 장기간의 임시치관 사용 시 주기적인 재제작도 고려할 필요가 있겠다.

In this study, the surface treatment of a self-cured temporary crown was polished using a denture bur, silicone bur, or pumice. The color stability of the temporary crown resin specimen was evaluated by immersing it in coffee, and cola, wine, beer, red pepper paste, or soybean paste. Two-hundred eighty-five identical resin specimens with six types of staining solution and three types of surface treatment were placed in a shaking incubator at $37^{\circ}C$. The degree of discoloration was observed using a time-lapse recording of days 1, 5, and 7. $L^*$, $a^*$, and $b^*$ were measured using a spectrophotometer, which shows the quantitative value of discoloration, and statistically processed after calculating ${\Delta}E^*$. The results show that as time passed, all the specimens showed a color change (p<0.001). The amount of color change was the greatest in in crowns with denture bur polishing on the day 1, 5, and 7. As the precipitation time increased, the ${\Delta}E^*$ value was also increased. Of the specimens immersed on day 1, the greatest color change in crowns polished with denture bur was observed in those immersed in red pepper paste, while the smallest color change was observed in those immersed in cola. On days 5 and 7, the greatest color change in crowns polished with denture bur was observed in those immersed in red wine. Crowns polished with silicone bur and immersed in soybean paste exhibited the smallest color change. Based on the results, compared to pumice polishing, silicone bur polishing results in better color stability, saves time and money, and is recommended for patients with temporary crowns.

키워드

참고문헌

  1. Lee SH: A comparative study on the transverse strength of the provisional restoration acrylic resin according to the method of reinforcement. Unpublished master's thesis, Dankook University, Cheonan, 1995.
  2. Ju TH, Cho HW, Dong JK: The marginal accuracy of temporary crown with different matrix. J Korean Acad Prosthodont 29: 59-66, 1991.
  3. Youn SH, Oh NS, Kim IK, et al.: Effect of time and temperature on the marginal fit of provisional resin crown during polymerization. J Korean Acad Prosthodont 39: 514-525, 2001.
  4. Park KY: Effect of surface sealer on color stability of provisional restorative resins. Unpublished master's thesis, Wonkwang University, Iksan, 2007.
  5. Park SH, Noh BD, Kim MR, Ahn HJ: The change in surface conversion and discoloration in dental restorative composite resin under different polishing methods. Restor Dent Endod 25: 482-486, 2000.
  6. Kang BD, Choi JY, Chang WG, Lim BS, Lee SH, Yang HC: Evaluation of color stability of esthetic restorative materials as simulated oral environments. Korea J Dent Mater 36: 265-275, 2009.
  7. Lee JS: Color stability of the esthetic restorative materials under accelerated aging and immersion in food. Unpublished doctoral dissertation, Korea University, Seoul, 2005.
  8. Miller SD: The anterior fixed provisional restoration: a direct method. J Prosthet Dent 50: 516, 1983. https://doi.org/10.1016/0022-3913(83)90573-5
  9. Kim HM: Effect of powder/liquid ratio of temporary crown and fixed partial denture materials on the water sorption and fracture toughness. Unpublished master's thesis, Korea University, Seoul, 2009.
  10. Min JB, Cho KC, Cho YG: Surface roughness of composite resin according to finishing methods. Restor Dent Endod 32: 138-150, 2007.
  11. Lee SH: Esthetic considerations for porcelain fused to metal restorations. J Korean Dental Assoc 20: 127-130, 1982.
  12. Jung HJ: Evaluation of the color stability of light cured composite resins according to the resin matrices. Unpublished master's thesis, Chonnam National University, Gwangju, 2012.
  13. Lee SY, Kim HC, Hur B, Park JK: Surface roughness and color stability of various composite resins. Restor Dent Endod 32: 542-549, 2007.
  14. Park SH: A study on the color stability of temporary resins on staining according to polymerizing methods. Unpublished master's thesis, Dankook University, Cheonan, 1999.
  15. Kim SH, Choi HS, Roh JY, Kim KM: The effect of 15% carbamide peroxide on the surface roughness and staining of esthetic restoratives. J Dent Hyg Sci 13: 165-173, 2013.
  16. Cho YJ: Color stability of light cured resin cements on different extrinsic discoloration factor. Unpublished master's thesis, Yonsei University, Seoul, 2008.
  17. Choi EJ, Moon SH, Mun SR. et al.: Color change of food staining and bleaching on composite resin. J Dent Hyg Sci 12: 477-485, 2012.
  18. Ha JY: Mechanical properties and exothermic behavior of provisional restoration materials. Unpublished master's thesis, Graduate School, Kyungpook National University. Daegu, 2009.
  19. Bangtson LK, Goodkind RJ: The conversion of Chromascan designations to CIE tristimulus values. J Prosthet Dent 48: 610-617, 1982. https://doi.org/10.1016/0022-3913(82)90372-9
  20. Eldiwany M, Friedl KH, Powers JM. Color stability of light-cured and post-cured composites. Am J Dent 8: 179-181, 1995.
  21. Shotwell JL, Razzoog ME, Koran A: Color stability of long-term soft denture liners. J Prosthet Dent 68: 836-838, 1992. https://doi.org/10.1016/0022-3913(92)90213-T
  22. Kang ES: The color stability of direct denture reline resins. Unpublished master's thesis, Pusan National University, Busan, 2003.
  23. Iazzetti G, Burgess JO, Gardiner D, Ripps A: Color stability of fluoride-containing restorative materials. Oper Dent 25: 520-525, 2000.
  24. Jeong YJ, Lim JH, Cho IH, Lim HS: Color stability of ceromers in three food colorants. J Korean Acad Prosthodont 41: 136-147, 2003.
  25. Lee YI, Cho IH, Lee JS: The effect of various foods on the color stability of artificial teeth. J Korean Acad Prosthodont 47: 82-90, 2009. https://doi.org/10.4047/jkap.2009.47.1.82
  26. Yu JS, Hwang SH, Han YK: The effect of various coffees on the color stability of self-cured temporary crown resin. J Dent Hyg Sci 12: 342-347, 2012.
  27. Cooley RL, Sandoval VA, Branwell SE: Fluoride release and color stability of a fluoride-containing composite resin. Quintessence Int 19: 899-904, 1988.
  28. Jeon YM, Lim HS, Sin SY: The effect of fermented foods on the color and hardness change of denture base acrylic resins. Statement Probl 42: 344-355, 2004.
  29. Cho SH, Lim HS, Sin SY: The effect of fermented foods on the color change of soft denture liners. J Korean Acad Prosthodont 42: 572-582, 2004.
  30. Kim YM: Color stability of four different artificial teeth against various food solutions. Unpublished master's thesis, Dankook University, Cheonan, 2013.
  31. Stober T, Gilde H, Lenz P: Color stability of highly filled composite resin materials for facing. J Dent Mater 17: 87-94, 2001. https://doi.org/10.1016/S0109-5641(00)00065-8
  32. Kim KM, Bae TS, Han JS: The effect of processing method and surface design on the transverse strength of repaired denture base resin. J Korean Acad Prosthodont 34: 1-19, 1996.
  33. Park SW, Cho SS, Yang HS: Effect of opaque thermocycling on the color stability of veneered resin. Korea J Dent Mater 26: 251-257, 1999.
  34. Jung CM: A study on the porosity of denture base resins processed by microwave energy. J Korean Acad Prosthodont 34: 1-14, 1996.
  35. Donovan TE, Hurst RG, Campagni WV: Physical properties of acrylic resin polymerized by four different techniques. J Prosthet Dent 54: 522-524, 1985. https://doi.org/10.1016/0022-3913(85)90425-1

피인용 문헌

  1. Assessment of Internal Fitness on Resin Crown Fabricated by Digital Light Processing 3D Printer vol.19, pp.4, 2016, https://doi.org/10.17135/jdhs.2019.19.4.238
  2. DLP 프린터로 제작된 레진 임시수복물의 3차원적 정확도 평가 vol.42, pp.1, 2016, https://doi.org/10.14347/kadt.2020.42.1.35