DOI QR코드

DOI QR Code

3D 프린팅 기술 기반 창업 성공 사례

Successful Examples of 3D Printing Technology-based Start-up Enterprises

  • 심진형 (한국산업기술대학교 기계공학과) ;
  • 윤원수 (한국산업기술대학교 기계공학과) ;
  • 고태조 (영남대학교 기계공학부)
  • Shim, Jin-Hyung (Department of Mechanical Engineering, Korea Polytechnic University) ;
  • Yun, Won Soo (Department of Mechanical Engineering, Korea Polytechnic University) ;
  • Ko, Tae Jo (School of Mechanical Engineering, Yeungnam University)
  • 투고 : 2016.01.06
  • 심사 : 2016.03.18
  • 발행 : 2016.04.30

초록

The process of three-dimensional (3D) printing (also known as "rapid prototyping" and "additive manufacturing") uses computer-created digital models to produce 3D objects with a desired shape by stacking materials through a layer-by-layer process. The industrial potential and feasibility of 3D printing technology were recently highlighted in President Obama's State of the Union address in 2013. Since his speech, worldwide investment in and attention toward 3D printing technology have increased explosively. In addition, a number of 3D printing technology-based start-up companies have been established and evaluated as emerging enterprises making successful business models. In this paper, successful start-up companies (domestic and overseas) based on 3D printing technology will be reviewed.

키워드

참고문헌

  1. Geng, H.. Manufacturing Engineering Handbook, McGraw Hill Professional, pp. 1-880, 2015.
  2. Tapia, G. and Elwany, A., "A Review on Process Monitoring and Control in Metal-based Additive Manufacturing," Journal of Manufacturing Science and Engineering, Vol. 136, No. 6, pp. 060801, 2014. https://doi.org/10.1115/1.4028540
  3. Lan, P. T., Chou, S. Y., Chen, L. L. and Gemmill, D., "Determining Fabrication Orientations for Rapid Prototyping with Stereolithography Apparatus." Computer-Aided Design, Vol. 29, No. 1, pp. 53-62, 1997. https://doi.org/10.1016/S0010-4485(96)00049-8
  4. Fuh, J. Y. H., Choo, Y. S., Nee, A. Y. C., Lu, L. and Lee, K. C., "Improvement of the UV Curing Process for the Laser Lithography Technique." Materials and Design, Vol. 16, No. 1, pp. 23-32, 1995. https://doi.org/10.1016/0261-3069(95)00007-L
  5. Ion J., Laser Processing of Engineering Materials: Principles, Procedure and Industrial Application, Butterworth-Heinemann, pp. 1-576, 2005.
  6. Kruth, J. P., Mercelis, P., Van Vaerenbergh, J., Froyen, L. and Rombouts, M., "Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting," Rapid Prototyping Journal, Vol. 11, No. 1, pp. 26-36, 2005. https://doi.org/10.1108/13552540510573365
  7. Shim J. H., Kim J. Y., Park M., Park J. and Cho D. W., "Development of a Hybrid Scaffold with Synthetic Biomaterials and Hydrogel using Solid Freeform Fabrication Technology," Biofabrication, Vol. 3, No. 3, pp. 034102. 2011. https://doi.org/10.1088/1758-5082/3/3/034102
  8. Norotte C., Marge F. S., Niklason L. E. and Forgacs G., "Scaffold-free vascular tissue engineering using bioprinting," Biomaterials, Vol. 30, No. 30, pp. 5910-5917, 2009. https://doi.org/10.1016/j.biomaterials.2009.06.034
  9. Itoh, M., Nakayama, K., Noguchi, R., Kamohara, K., Furukawa, K., Uchihashi, K., Toda, S., Oyama, J., Node, K. and Morita, S., "Scaffold-free Tubular Tissues created by a Bio-3D Printer undergo Remodeling and Endothelialization when Implanted in Rat Aortae," PIoS One, Vol. 10, No. 9, pp. e0145971, 2015. https://doi.org/10.1371/journal.pone.0145971
  10. Pati F., Jang J., Ha D. H., Kim S. W., Rhie J. W., Shim J. H., Kim D. H. and Cho D. W., "Printing Three-dimensional Tissue Analogues with Decellularized Extracellular Matrix Bioink." Nature Communications, Vol. 2, No. 5, pp. 3935, 2014.

피인용 문헌

  1. Analysis of Mechanical Properties of Polymer Material for Clear Aligner using Uniaxial Tensile Test vol.17, pp.5, 2018, https://doi.org/10.14775/ksmpe.2018.17.5.064
  2. CAPP for 3D Printer with Metallic Wire Supplied from the Front vol.17, pp.5, 2018, https://doi.org/10.14775/ksmpe.2018.17.5.155
  3. 융합 소방용 안전모 개발을 위한 중요도-만족도 연관 분석 vol.15, pp.6, 2016, https://doi.org/10.14775/ksmpe.2016.15.6.109
  4. An Algorithm for the Removing of Offset Loop Twists during the Tool Path Generation of FDM 3D Printer vol.16, pp.3, 2017, https://doi.org/10.14775/ksmpe.2017.16.3.001
  5. 금속 3D 프린팅으로 보수된 AISI H13 금형강 마모특성 평가 vol.16, pp.4, 2016, https://doi.org/10.14775/ksmpe.2017.16.4.009
  6. 기술기반 창업기업 중심의 벤처우대제도 법령에 관한 연구 vol.15, pp.2, 2016, https://doi.org/10.16972/apjbve.15.2.202004.111
  7. 적층가공 특화설계기법을 이용한 스페이스 프레임 차체 노드 부품 개발 vol.19, pp.5, 2020, https://doi.org/10.14775/ksmpe.2020.19.05.45
  8. The Impact of Cross-Cultural Adaptation on the Psychology and Entrepreneurial Intention of Venture Entrepreneurs vol.12, pp.None, 2021, https://doi.org/10.3389/fpsyg.2021.705075