참고문헌
- Asadi, M. and M.H. Bagheripour, 2015, Modified criteria for sliding and non-sliding failure of anisotropic rocks, Int. J. Rock Mech. Min. Sci., 73, 95-101.
- Attewell, P.B. and M.R. Sandford, 1974, Intrinsic shear strength of a brittle, anisotropic rock - I: Experimental and mechanical interpretation, Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., 11, 423-430. https://doi.org/10.1016/0148-9062(74)90453-7
- Cazacu, O. and N.D. Cristescu, 1999, A paraboloid failure surface for transversely isotropic materials, Mechanics of Materials, 31, 381-393. https://doi.org/10.1016/S0167-6636(99)00008-3
- Duveau, G., J.F. Shao and J.P. Henry, 1998, Assessment of some failure criteria for strongly anisotropic geomaterials, Mech. Coh.-Fric. Mater., 3, 1-26. https://doi.org/10.1002/(SICI)1099-1484(199801)3:1<1::AID-CFM38>3.0.CO;2-7
- Donath, F.A., 1964, Strength variation and deformational behavior in anisotropic rock. In: Judd, W.R. (Ed.), State of stress in the Earth's crust, Elsevier, Amsterdam, 281-297.
- Hoek, E., 1983, Strength of jointed rock masses, Geotechnique, 33(3), 187-223. https://doi.org/10.1680/geot.1983.33.3.187
- Jaeger, J.C., 1960, Shear failure of anisotropic rocks. Geol. Mag., 97, 65-72. https://doi.org/10.1017/S0016756800061100
- Lee, Y.K., 2007, Prediction of strength for transversely isotropic rock based on critrical plane approach, Tunnel & Underground Space, Korean Society for Rock Mechanics, 17, 119-127.
- Lee, Y.K., 2008, An investigation of anisotropic tensile strength of transversely isotropic rock by critical plane approach, Tunnel & Underground Space, Korean Society for Rock Mechanics, 18, 194-201.
- Lee, Y.K. and B.H. Choi, 2011, Anisotropic version of Mohr-Coulomb failure criterion for transversely isotropic rock, Tunnel & Underground Space, Korean Society for Rock Mechanics, 21(3), 174-180.
- McLamore, R. and K.E. Gray, 1967, The mechanical behavior of anisotropic sedimentary rocks, J. Eng. Ind., Trans. ASME, 89, 62-73. https://doi.org/10.1115/1.3610013
- Niandou, H., J.F. Shao, J.P. Henry and D. Fourmaintraux, 1997, Laboratory investigation of the mechanical behaviour of Tournemire shale, Int. J. Rock Mech. Min. Sci., 34(1), 3-16. https://doi.org/10.1016/S1365-1609(97)80029-9
- Pietruszczak, S. and M. Mroz, 2000, Formulation of anisotropic failure criteria incorporating a microstructure tensor, Computers and Geotechnics, 26, 105-112. https://doi.org/10.1016/S0266-352X(99)00034-8
- Pietruszczak, S. and M. Mroz, 2001, On failure criteria for anisotropic cohesive-frictional materials, Int. J. Numer. Anal. Methods Geomech., 21, 509-524.
- Ramamurthy, T., 1993, Strength and modulus responses of anisotropic rocks, In: Hudson, J.A. (Ed.), Compressive Rock Engineering, Vol. 1-I Fundamentals, Pergamon Press, 313-329.
- Saeidi, O., R.G. Vaneghi, V. Rasouli, and R. Gholami, 2013, A modified empirical criterion for strength of transversely anisotropic rocks with metamorphic origin, Bull. Eng. Geol. Environ., 72, 257-269. https://doi.org/10.1007/s10064-013-0472-9
- Saroglou, H. and G. Tsiambaos, 2008, A modified Hoek- Brown failure criterion for anisotropic intact rock, Int. J. Rock Mech. Min. Sci., 45, 223-234. https://doi.org/10.1016/j.ijrmms.2007.05.004
- Tiwari, R.P. and K.S. Rao, 2007, Response of an anisotropic rock mass under polyaxial stress state, J. Mater. Civil Eng., 19(5), 393-403. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:5(393)
- Whittles, D.N., E. Yasar, D.J. Reddish and P.W. Lloyd, 2002, Anisotropic strength and stiffness properties of some UK coal measure siltstones, Quaterly J. Eng. Geol. Hydrogeol., 35, 155-166. https://doi.org/10.1144/1470-9236/1999-29