DOI QR코드

DOI QR Code

Cyclic Behavior of Slender Diagonally Reinforced Coupling Beams according to Transverse Reinforcement Spacing

횡보강근 간격에 따른 세장한 대각보강 연결보의 이력거동 평가

  • Received : 2016.01.07
  • Accepted : 2016.03.17
  • Published : 2016.03.30

Abstract

Coupled shear walls system are frequently used as the primary components of the lateral force resisting system in medium and high rise buildings. Suitably devised coupling beams may be able to not only survive over large displacement demands, but also serve as a primary source for energy dissipation. Recently due to limitations in story height, coupling beams are relatively slender, with aspect ratios on the order of 2~3.5. In these beams, the effectiveness of diagonal reinforcement is questionable because of the shallow angle. The objective of this study is to evaluate shallow diagonal reinforcement coupling beams and to simplify the reinforcement details of diagonal reinforcement coupling beams by reducing the transverse reinforcement around the beam perimeter that is required for the confinement of diagonal reinforcement coupling beams. Experiments were conducted using three diagonal reinforcement coupling beams with 3.5 aspect ratio provided by KCI(2012) under reversed cyclic loads to evaluate the hysteretic behavior of the specimens. The test results show that slender diagonal reinforced coupling beam specimens with either code-complied transverse reinforcement or half the code-complied transverse reinforcement produced satisfactory strength and deformation capacity.

Keywords

Acknowledgement

Supported by : 중소기업청, 한국연구재단

References

  1. ACI Committee 318. (2014). Building Code Requirements for Structural Concrete and Commentary(ACI 318-14), American Concrete Institute, 269-302.
  2. ASCE/SEI. (2013). Seismic rehabilitation standards committee. Seismic rehabilitation of existing buildings (ASCE/SEI 41-13). American Society of Civil Engineers, Reston, VA, US.
  3. Barney, G. B., Shiu, K. N., Rabbat, B. G. (1980). Behavior of Coupling Beams under Load Reversals, Portland Cement Association, 1-22.
  4. Berg, G. V., & Stratta, J. L. (1964). Anchorage and the Alaska earthquake of March 27, American Iron and Steel Institute, 68.
  5. Canbolat, B. A., Parra-Montesinos, G. J., & Wight, J. K. (2005). Experimental Study on Seismic Behavior of High-Performance Fiber-Reinforced Cement Composite Coupling Beams, ACI Structural Journal, Vol. 102, No. 1, 159-166.
  6. Fortney, P. J., Rassati, G. A., & Sharooz, B. M. (2008). Investigation on Effect of Transverse Reinforcement on Performance of Diagonally Reinforced Coupling Beams, ACI Structural Journal, Vol. 105, No. 6, 781-788.
  7. Galano, L., & Vignoli, A. (2000). Seismic Behavior of Short Coupling Beams with Different Reinforcement Layouts, ACI Structural Journal, Vol. 97, No. 6, 876-885.
  8. Harries, K. A., Fortney, P. J., Shahrooz, B. M., & Brienen, P. J. (2005). Practical Design of Diagonally Reinforced Concrete Coupling Beams-Critical Review of ACI 318 Requirements, ACI Structural Journal, Vol. 102, No. 6, 876-882.
  9. Korea Concrete Institute. (2012). Concrete Design Code and Commentary, Kimoondang Publishing Company, Seoul, Korea, 243-268.
  10. Naish, D., Wallace, J. W., Fry, J. A., & Klemencic, R. (2009). Reinforced Concrete Link Beams: Alternative Details for Improved Construction, UCLA-SGEL Report 2009-06, Structural & Geotechnical Engineering Laboratory, University of California at Los Angeles, 1-103.
  11. Naish, D., Fry A., Klemencic, R., & Wallace, J. (2013). Reinforced Concrete Coupling Beams Part 1: Testing, ACI Structural Journal, Vol. 110, No. 6, 1057-1066.
  12. Pan, A., & Moehle, J. P. (1989). Lateral Displacement Ductility of Reinforced Concrete Flat Plates, ACI Structural Journal, Vol. 86, No. 3, 250-258.
  13. Paulay, T., & Binney, J. R. (1974). Diagonally Reinforced Concrete Beams of Shear Walls, ACI Special Publication, Vol. 42, 579-598.
  14. Paulay, T., & Priestley, M. J. N. (1992). Seismic Design of Reinforced Concrete and Masonry Buildings, Wiley, New York.
  15. Paulay, T. (2002). The displacement capacity of reinforced concrete coupled walls. Eng Struct, 24(9), 1165-1175. https://doi.org/10.1016/S0141-0296(02)00050-0
  16. Shui, N. K., Barney, G. B., Fiorato, A. E., & Corley, W. G. (1978). Reversed load tests of reinforced concrete coupling beams, Proceedings of the Central American Conference on Earthquake Engineering, El Salvador. 239-249.
  17. Taranath, B. S. (2010). Reinforced Concrete Design of Tall Buildings, CRC Press, Boca Raton, FL, USA.
  18. Tassios, T. P., Moretti, M., & Bezas, A. (1996). On the Behavior and Ductility of Reinforced Concrete Coupling Beams of Shear Walls, ACI Structural Journal, Vol. 93, No. 6, 711-720.