Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Effect of local wall thinning on ratcheting behavior of pressurized 90° elbow pipe under reversed bending using finite element analysis

  • Chen, Xiaohui (School of Control Engineering, Northeastern University) ;
  • Chen, Xu (School of Chemical Engineering and Technology, Tianjin University)
  • Received : 2015.04.05
  • Accepted : 2016.01.06
  • Published : 2016.03.20
⟨ Previous Next ⟩

Abstract

Ratcheting deformation of pressurized Z2CND18.12N stainless steel $90^{\circ}$ elbow pipe with local wall thinning subjected to constant internal pressure and reversed bending was studied using finite element analysis. Chen-Jiao-Kim (CJK) kinematic hardening model, which was used to simulate ratcheting behavior of pressurized $90^{\circ}$ elbow pipe with local wall thinning at extrados, flanks and intrados, was implemented into finite element software ANSYS. The local wall thinning was located at extrados, flanks and intrados of $90^{\circ}$ elbow pipe, whose geometry was rectangular cross-section. The effect of depth, axial length and circumferential angle of local wall thinning at extrados, flanks and intrados on the ratcheting behaviors of $90^{\circ}$ elbow pipe were studied in this paper. Three-dimensional elastic-plastic analysis with Chen-Jiao-Kim (CJK) kinematic hardening model was carried out to evaluate structural ratcheting behaviors. The results indicated that ratcheting strain was generated mainly along the hoop direction, while axial ratcheting strain was relatively small.

Keywords

References

  1. Abdel Karim, M. and Ohno, N. (2000), "Kinematic hardening model suitable for ratcheting with steadystate", Int. J. Plast., 16(3-4), 225-240. https://doi.org/10.1016/S0749-6419(99)00052-2
  2. ASME (2007), American society of mechanical engineers; Section iii, New York, NY, USA.
  3. Bari, S. and Hassan, T. (2000), "Anatomy of coupled constitutive model of ratcheting simulation", Int. J. Plast., 16(3-4), 381-409. https://doi.org/10.1016/S0749-6419(99)00059-5
  4. Bari, S. and Hassan, T. (2002), "An advancement in cyclic plasticity modeling for multiaxial ratcheting simulation", Int. J. Plast., 18(7), 873-894. https://doi.org/10.1016/S0749-6419(01)00012-2
  5. Chaboche, J.L. (1986), "Time independent constitutive theories for cyclic plasticity", Int. J. Plast., 2(2), 149-188. https://doi.org/10.1016/0749-6419(86)90010-0
  6. Chaboche, J.L., Dang-Van, K. and Cordier, G. (1979), "Modelization of the strain memory effect on the cyclic hardening of 316 stainless steel", Proceedings of the 5th International Conference on SMiRT, Div. L, Berlin, Germany, August.
  7. Chen, X., Jiao, R. and Kim, K.S. (2005), "On the Ohno-Wang kinematic hardening rules for multiaxial ratchetting modeling of medium carbon steel", Int. J. Plast., 21(1), 161-184. https://doi.org/10.1016/j.ijplas.2004.05.005
  8. Chen, X.H., Chen, X., Yu, D.J. and Gao, B.J. (2013), "Recent progresses in experimental investigation and finite element analysis of ratcheting in pressurized piping", Int. J. Pres. Ves. Pip., 101, 113-142. https://doi.org/10.1016/j.ijpvp.2012.10.008
  9. Chen, X.H., Chen, X., Chen, G. and Li, D.M. (2015), "Ratcheting behavior of pressurized Z2CND18.12N stainless steel pipe under different control modes", Steel Compos. Struct., Int. J., 18(1), 29-50. https://doi.org/10.12989/scs.2015.18.1.029
  10. Hassan, T., Rahman, M. and Bari, S. (2015), "Low-cycle fatigue and ratcheting responses of elbow piping components", J. Press. Vess.-T. ASME, 137(3), 031010-1-12. https://doi.org/10.1115/1.4029068
  11. Kim, J.W., Lee, S.H. and Park, C.Y. (2009), "Experimental evaluation of the effect of local wall thinning on the failure pressure of elbows", Nucl. Eng. Des., 239(12), 2737-2746. https://doi.org/10.1016/j.nucengdes.2009.10.003
  12. KTA (1995), Kerntechnischer Ausschuss; Sicherheitstechnische Regel des KTA, Komponenten des primarkreises von Leichtisserreaktoren, Teil: Auslegung, Konstruktion und Berchnung, Regelanderungsentwurf.
  13. Li, H., Wood, J., McCormack, R. and Hamiton, R. (2013), "Numerical simulation of ratcheting and fatigue behavior of mitred pipe bends under in-plane bending and internal pressure", Int. J. Pres. Ves. Pip., 101, 154-160. https://doi.org/10.1016/j.ijpvp.2012.11.003
  14. Ohno, N. and Wang, J.D. (1993a), "Kinematic hardening rules with critical state of dynamic recovery, Part I: formulations and basic features for ratcheting behavior", Int. J. Plast., 9(3), 375-390. https://doi.org/10.1016/0749-6419(93)90042-O
  15. Ohno, N. and Wang, J.D. (1993b), "Kinimatic hardening rules with critical state of dynamic recovery, Part II: Application to experiments of ratcheting behavior", Int. J. Plast., 9(3), 391-403. https://doi.org/10.1016/0749-6419(93)90043-P
  16. RCC-MR (1985), Design rules for class 1 equipment, RCC-MR codes, revision.
  17. Shi, H.G., Chen, G., Wang, Y. and Chen, X. (2013), "Ratcheting behavior of pressurized elbow pipe with local wall thinning", Int. J. Pres. Ves. Pip., 102-103, 14-23. https://doi.org/10.1016/j.ijpvp.2012.12.002
  18. Simo, J.C. and Taylor, R.L. (1985), "Consistent tangent operators for rate-independent elastoplasticity", Comput. Method. Appl. Mech. Eng., 48(1), 101-118. https://doi.org/10.1016/0045-7825(85)90070-2
  19. Simo, J.C. and Taylor, R.L. (1986), "A return mapping algorithm for plane stress elasto-plasticity", Int. J. Numer. Meth. Eng., 22, 649-670. https://doi.org/10.1002/nme.1620220310
  20. Takahashi, K., Tsunoi, S., Hara, T., Ueno, T., Mikami, A., Takada, H., Ando, K. and Shiratori, M. (2010), "Experimental study of low-cycle fatigue of pipe elbows with local wall thinning and life estimation using finite element analysis", Int. J. Pres. Ves. Pip., 87, 211-219. https://doi.org/10.1016/j.ijpvp.2010.03.022
  21. Vishnuvardhan, S., Raghava, G., Gandhi, P., Goyal, S., Gupta, S.K. and Bhasin, V. (2013), "Ratcheting strain assessment in pressurized stainless steel elbows subjected to in-plane bending", Procedia Eng., 55, 666-670. https://doi.org/10.1016/j.proeng.2013.03.312

Cited by

  1. Evaluation of AF type cyclic plasticity models in ratcheting simulation of pressurized elbow pipes under reversed bending vol.21, pp.4, 2016, https://doi.org/10.12989/scs.2016.21.4.703
  2. Ratcheting Behavior of Weld Joints Under Uniaxial Cyclic Loading Using Miniature Specimen pp.1995-8196, 2018, https://doi.org/10.1007/s12209-018-0160-8
  3. Ratcheting Effect of Pressurized 90° Elbow Pipe under In-Plane Opening, Closing, and Reverse Bending vol.10, pp.2, 2019, https://doi.org/10.1061/(ASCE)PS.1949-1204.0000369
  4. Evaluation of limit load analysis for pressure vessels - Part I: Linear and nonlinear methods vol.22, pp.6, 2016, https://doi.org/10.12989/scs.2016.22.6.1391
  5. Evaluation of limit load analysis for pressure vessels - Part II: Robust methods vol.23, pp.1, 2016, https://doi.org/10.12989/scs.2017.23.1.131
  6. Effects of temperature on the ratcheting behavior of pressurized 90° elbow pipe under force controlled cyclic loading vol.19, pp.5, 2016, https://doi.org/10.12989/sss.2017.19.5.473
  7. Local ratcheting behavior in notched 1045 steel plates vol.28, pp.1, 2016, https://doi.org/10.12989/scs.2018.28.1.001
  8. Ratcheting behavior of pressurized lateral nozzle of cylinder with local wall thinning under different loading paths vol.117, pp.None, 2016, https://doi.org/10.1016/j.engfailanal.2020.104947