Biomaterials and Biomechanics in Bioengineering

  • 제3권2호
  • /
  • Pages.115-127
  • /
  • 2016
  • /
  • 2465-9835(pISSN)
  • /
  • 2465-9959(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Sensitivity analysis of shoulder joint muscles by using the FEM model

  • Metan, Shriniwas.S. (Department of Mechanical Engineering, NK Orchid College of Engineering & Technology) ;
  • Mohankumar, G.C. (Department of Mechanical Engineering, National Institute of Technology Karnataka) ;
  • Krishna, Prasad (Department of Mechanical Engineering, National Institute of Technology Karnataka)
  • 투고 : 2015.08.10
  • 심사 : 2016.11.15
  • 발행 : 2016.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

Shoulder pain, injury and discomfort are public health and economic issues world-wide. The function of these joints and the stresses developed during their movement is a major concern to the orthopedic surgeon to study precisely the injury mechanisms and thereby analyze the post-operative progress of the injury. Shoulder is one of the most critical joints in the human anatomy with maximum degrees of freedom. It mainly consists of the clavicle, scapula and humerus; the articulations linking them; and the muscles that move them. In order to understand the behavior of individual muscle during abduction arm movement, an attempt has been made to analyze the stresses developed in the shoulder muscles during abduction arm movement during the full range of motion by using the 3D FEM model. 3D scanning (ATOS III scanner) is used for the 3D shoulder joint cad model generation in CATIA V5. Muscles are added and then exported to the ANSYS APDL solver for stress analysis. Sensitivity Analysis is done for stress and strain behavior amongst different shoulder muscles; deltoid, supraspinatus, teres minor, infraspinatus, and subscapularies during adduction arm movement. During the individual deltoid muscle analysis, the von Mises stresses induced in deltoid muscle was maximum (4.2175 MPa) and in group muscle analysis it was (2.4127MPa) compared to other individual four rotor cuff muscles. The study confirmed that deltoid muscle is more sensitive muscle for the abduction arm movement during individual and group muscle analysis. The present work provides in depth information to the researchers and orthopedicians for the better understanding about the shoulder mechanism and the most stressed muscle during the abduction arm movement at different ROM. So during rehabilitation, the orthopedicians should focus on strengthening the deltoid muscles at earliest.

키워드

참고문헌

  1. Astier, V., Thollon, L., Arnoux, P. J., Mouret, F. and Brunet, C. (2007), "A finite element model of the shoulder for many applications: trauma and orthopaedics", Eurpean HyperWorks Technology Conference, Berlin, Germany.
  2. Blemker, S.S. and Delp, S.L. (2005), "Three-dimensional representation of complex muscle architectures and geometries", Ann Biomed Eng., 33(5), 661-673. https://doi.org/10.1007/s10439-005-1433-7
  3. Carol Oatis (2009), "Kinesiology: Introduction to biomechanical analysis, The Mechanics and Path Mechanics of Human Movement", Lippincott Williams & Wilkins., 1, 115-122.
  4. Chadwick, E.K., Blana, D., van den Bogert, A.J. and Kirsch, R.F. (2009), "A real-time, 3-D musculoskeletal model for dynamic simulation of arm movements", Proceedings of the IEEE Transactions on Biomedical Engineering, 56(4), 941-948. https://doi.org/10.1109/TBME.2008.2005946
  5. Delp, S.L. and Blemker, S.S. and Pinsky, P.M. (2005), "A 3D model of muscle reveals the causes of nonuniform strains in the biceps brachii", J. Biomech., 38(4), 657-665. https://doi.org/10.1016/j.jbiomech.2004.04.009
  6. Dul, J. (1988), "A biomechanical model to quantify shoulder load at the work place", Clinical Biomech., 3(3), 124-128. https://doi.org/10.1016/0268-0033(88)90057-5
  7. Friedman, R.J, La Berge, M., Dooley, R.L. and O_Hara, A.L. (1992), "Finite element modeling of the glenoid component: effect of design parameters on stress distribution", J. Shoulder Elbow Surgery, 1(5), 261-270. https://doi.org/10.1016/S1058-2746(09)80068-2
  8. Garner, B.A. and Pandy, M.G. (2001), "Musculoskeletal model of the upper limb based on the visible human male dataset", Comput. Method. Biomech. Biomed. Eng., 4(2), 93-126. https://doi.org/10.1080/10255840008908000
  9. Hayes, W.C. (1991), "Biomechanics of cortical and tubercular bone: implications for assessment of fracture risk. Basic orthopedic biomechanics", New York: Raven Press, 93-142.
  10. Holzbaur, K.R., Murray, W.M. and Delp, S.L. (2005), "A model of the upper extremity for simulating muscoskeletal surgery and analysing neuromuscular control", Ann. Biomed. Eng., 33(6), 829-840. https://doi.org/10.1007/s10439-005-3320-7
  11. Hughes, R.E. and An, K.N. (1996), "Force analysis of rotator cuff muscles", Clin Orthop, 330,75-83. https://doi.org/10.1097/00003086-199609000-00010
  12. Karlsson, D. and Peterson, B, (1992), "Towards a model for force predictions in the human shoulder", J. Biomech., 25(2), 189-199. https://doi.org/10.1016/0021-9290(92)90275-6
  13. Kim, S.Y., Boynton, E.L., Ravichandiran, K., Fung, L.Y., Bleakney, R. and Agur, A.M. (2007), "Threedimensional study of the musculotendinous architecture of supraspinatus and its functional correlations", Clin. Anat., 20(6), 648-655. https://doi.org/10.1002/ca.20469
  14. Lacroix, D. and Prendergast, P.J. (1997), "Stress analysis of glenoid component designs for shoulder arthroplasty", Proc. Inst. Mech. Eng., 211(6), 467-474. https://doi.org/10.1243/0954411981534583
  15. Lacroix, D., Murphy, L.A. and Prendergast, P.J. (2000), "Three-dimensional finite element analysis of glenoid replacement prostheses: a comparison of keeled and pegged anchorage systems", J Biomech. Eng., 122(4), 430-436. https://doi.org/10.1115/1.1286318
  16. Metan, S.S., Krishna, P. and Mohankumar, G.C. (2014), "FEM Model an Effective Tool to Evaluate Von Mises Stresses in Shoulder Joint and Muscles for Adduction and Abduction", Proc. Mater. Sci., 5, 2090-2098. https://doi.org/10.1016/j.mspro.2014.07.544
  17. Murphy, L.A., Prendergast, P.J. and Resch, H. (2001), "Structural analysis of an offset-keel design glenoid component compared with a center-keel design", J. Shoulder Elbow Surg., 10(6), 568-579. https://doi.org/10.1067/mse.2001.118630
  18. Novotny, J.E., Beynnon, B.D. and Nichols, C.E. (2000), "Modeling the stability of the human glenohumeral joint during external rotation", J. Biomech., 33(3), 345-54. https://doi.org/10.1016/S0021-9290(99)00142-6
  19. Orr TE, Carter DR, Schurman DJ, (1988), "Stress analyses of glenoid component designs", Clin Orthop, 232, 217-224.
  20. Porter, W., Gallagher, S. and Torma-Krajewski, J. (2010), "Analysis of applied forces and electromyography of back and shoulders muscles when performing a simulated hand scaling task", Appl. Ergon., 41(3), 411-416. https://doi.org/10.1016/j.apergo.2009.09.004
  21. Rakotomanana, L.R., Terrier, A., Ramaniraka, N.A and Leyvraz, P.F. (1999), "Anchorage of orthopaedic prostheses: influence of bone properties and bone-implant mechanics in Synthesis in bio solid mechanics", Kluwer Academic Publishers, 69, 55-66.
  22. Reilly. D.T., Burstein. A.H. and Frankel, V.H. (1974), "The elastic modulus for bone", J. Biomech., 7(3), 271-275. https://doi.org/10.1016/0021-9290(74)90018-9
  23. Rice, J.C., Cowin, S.C. and Bowman, J.A. (1998), "On the dependence of the elasticity and strength of cancellous bone on apparent density", J. Biomech., 21(2), 155-68. https://doi.org/10.1016/0021-9290(88)90008-5
  24. Romanes, G.J. (1986), Cunningham's manual of practical anatomy vol. 1: Uppar and lower limbs, Oxford University Press, ISBN 978-0-19-922909, 15th Edition, 60-61.
  25. Stone, K.D., Grabowski, J.J., Cofield, R.H., Morrey, B.F. and An, K.N. (1999), "Stress analyses of glenoid components in total shoulder arthroplasty", J. Shoulder Elbow Surg., 8(2), 151-158. https://doi.org/10.1016/S1058-2746(99)90009-5
  26. Terrier, A., Rakotomanana, L., Ramaniraka, N. and Leyvraz, P.F. (1997), "Adaptation models of anisotropic bone", Comput. Method. Biomech. Biomed. Eng., 1(1), 47-59. https://doi.org/10.1080/01495739708936694
  27. Van der Helm, F.C. (1994), "Analysis of the kinematic and dynamic behavior of the shoulder mechanism", J Biomech., 27(5), 527-550. https://doi.org/10.1016/0021-9290(94)90064-7
  28. Van der Helm, F.C. (1994), "Finite element musculoskeletal model of the shoulder mechanism", J. Biomech., 27(5), 551-69. https://doi.org/10.1016/0021-9290(94)90065-5
  29. Veselinovic, M., Vitkovic, N., Stevanovic, D., Trajanovic, M., Arsic, S., Milovanovic, J. and Stojkovic, M. (2011), "Study on creating human tibia geometrical models", Proceedings of the E-Health and Bioengineering Conference (EHB), 1-4.
  30. Webb, J.D., Blemker, S.S. and Delp, S.L. (2014), "3D finite element models of shoulder muscles for computing lines of actions and moment arms", Comput. Method. Biomech. Biomed. Eng., 17(8), 829-837. https://doi.org/10.1080/10255842.2012.719605