DOI QR코드

DOI QR Code

운영 중 해저 터널의 안정성 평가를 위한 역해석 프로그램 개발: 종단방향

The development of a back analysis program for subsea tunnel stability under operation: longitudinal direction

  • 안준상 (인하대학교 토목공학과) ;
  • 김병찬 (한양대학교 자원환경공학과) ;
  • 문현구 (한양대학교 자원환경공학과) ;
  • 송기일 (인하대학교 토목공학과)
  • An, Joon-Sang (INHA University, Graduate student, Dept. of Civil Engineering) ;
  • Kim, Byung-Chan (HANYANG University, Dept. of Natural Resources and Environmental Engineering) ;
  • Moon, Hyun-Koo (HANYANG University, Dept. of Natural Resources and Environmental Engineering) ;
  • Song, Ki-Il (INHA University, Graduate student, Dept. of Civil Engineering)
  • 투고 : 2016.11.03
  • 심사 : 2016.11.24
  • 발행 : 2016.11.30

초록

운영 중 해저 터널의 안정성 평가에 다양한 계측 정보를 사용해서 역해석하면, 효율적인 오차율 이내의 결과를 획득할 수 있다. 선행 연구에서 검증된 차분진화 알고리즘 기반의 역해석 수행 시 FLAC3D 등 범용 지반해석 프로그램을 사용했지만, 상대적으로 해석시간이 오래 걸리고, 제어가 어려운 단점이 있다. 이러한 이유로, 상대적으로 해석시간이 짧게 소요되는 beam-spring 모델기반의 FEM solver를 Python 언어로 개발하여, 기구축된 차분진화 알고리즘과 결합하였다. 계측 데이터로부터 실시간에 가깝게 운영 중 터널의 안정성 평가가 가능할 것으로 판단되며, 우선 솔버 개발에 용이한 종단방향 터널에 대해서 프로그램을 개발하였다.

If a back analysis is used in various measurement information for the estimation of an operating subsea tunnel safety, it is possible to obtain the results within efficient error rate. With such a commercial geotechnical analysis program as FLAC3D, back analysis is performed with a DEA which was validated in previous studies. However, there is a problem that is relatively a time-consuming analysis. For this reason, beam-spring model-based FEM solver which takes shorter relative analysis time, was developed by Python language, and then combined with the built-DEA. In order to consider the assessment of safety of an operation tunnel near real-time, a program for longitudinal direction tunnel was developed due to its relative easy development for analysis solver engine.

키워드

참고문헌

  1. AFTES - WG7 (1993), "Considerations on the Usual Methods of Tunnel Lining Design", French Tunneling and Underground Engineering Association, Working Group No. 7 - Temporary Supports and Permanent Lining.
  2. Ahmet, G.C. (2010), "Evaluation of structural analysis methods used for the design of TBM segmental linings", Master's thesis, Middle East Technical University.
  3. An, J.S., Kim, B.C., Moon, H.K., Song, K.I., Su, G.S. (2016a), "DEA optimization for operating tunnel back analysis", Journal of Korean Tunn Undergr Sp Assoc, Vol. 18, No. 2, pp. 183-193. https://doi.org/10.9711/KTAJ.2016.18.2.183
  4. An, J.S., Kim, B.C., Moon, H.K., Song, K.I. (2016b), "Estimation of subsea tunnel stability considering ground and lining stiffness degradation measurements", Journal of Korean Tunn Undergr Sp Assoc, Vol. 18, No. 5, pp. 389-399. https://doi.org/10.9711/KTAJ.2016.18.5.389
  5. Arnau, O., Molins, C. (2012), "Three dimensional structural response of segmental tunnel linings", Engineering structures, Vol. 44, pp. 210-221. https://doi.org/10.1016/j.engstruct.2012.06.001
  6. Arnau, O., Molins, C., Blom, C. B. M., Walraven, J. C. (2012), "Longitudinal time-dependent response of segmental tunnel linings", Tunnelling and underground space technology, Vol. 28, pp. 98-108. https://doi.org/10.1016/j.tust.2011.10.002
  7. Barpi, F., Barbero, M., Peila, D. (2011), "Numerical modelling of ground-tunnel support interaction using bedded-beam-spring model with fuzzy parameters", Gospodarka Surowcami Mineralnymi, Vol. 27, pp. 71-87.
  8. JSCE (1996), "Japanese Standard for Shield Tunnelling, Japan Society of Civil Engineers", The third edition, Tokyo.
  9. Kawabata, K., Sakai, S., Deguchi, T., Sudo, T., Hori, N., Ishikawa, T. (2014), "Repair and Reinforcement Technology for Safe and Secure Concrete Structures that Have a Long Service Life", NTT Technical Review, Vol. 12, No. 10.
  10. Kim, J.W., Hong, E.S., Cho, G.C. (2016), "Assessment of elastic-wave propagation characteristics in groutingimproved rock mass around subsea tunnels", Journal of Korean Tunn Undergr Sp Assoc, Vol. 18, No. 2, pp. 235-244. https://doi.org/10.9711/KTAJ.2016.18.2.235
  11. Koyama, Y. (2003), "Present status and technology of shield tunneling method in Japan", Tunnelling and Underground Space Technology, Vol. 18, No. 2, pp. 145-159. https://doi.org/10.1016/S0886-7798(03)00040-3
  12. Li, X., Yan, Z., Wang, Z., Zhu, H. (2015), "A progressive model to simulate the full mechanical behavior of concrete segmental lining longitudinal joints", Engineering Structures, Vol. 93, pp. 97-113. https://doi.org/10.1016/j.engstruct.2015.03.011
  13. Nikkhah, M., Mousavi, S.S., Zare, S., Khademhosseini, O. (2016), "Evaluation of structural analysis of tunnel segmental lining using beam-spring method and force-method (Case study: Chamshir water conveyance tunnel)", Journal of Mining and Environment. (Published online: 27 May 2016)
  14. Storn, R., Price, K. (1997), "Differential evolution-a simple and efficient heuristic for global optimization over continuous spaces", Journal of Global Optimization, Vol. 11, No. 4, pp. 341-359. https://doi.org/10.1023/A:1008202821328
  15. US Army Corps of Engineering (USACE) (1997), "Tunnels and shafts in rock", Engineering manual 1110-2-2901, Washington (USA).
  16. Woo, S.J., Yoo, C.S. (2015), "A study on the member forces of segmental linings considering key segments", Journal of Korean Tunn Undergr Sp Assoc, Vol. 17, No. 3, pp. 363-382. https://doi.org/10.9711/KTAJ.2015.17.3.363
  17. Wood M. (1975), "The Circular Tunnel in Elastic Ground", Geotechnique, Vol. 25, No. 1. pp. 115-127. https://doi.org/10.1680/geot.1975.25.1.115