DOI QR코드

DOI QR Code

Properties of pervious concrete containing high-calcium fly ash

  • Sata, V. (Sustainable Infrastructure Research and Development Center, Department of Civil Engineering, Faculty of Engineering, Khon Kaen University) ;
  • Ngohpok, C. (Sustainable Infrastructure Research and Development Center, Department of Civil Engineering, Faculty of Engineering, Khon Kaen University) ;
  • Chindaprasirt, P. (Sustainable Infrastructure Research and Development Center, Department of Civil Engineering, Faculty of Engineering, Khon Kaen University)
  • 투고 : 2014.01.20
  • 심사 : 2016.01.22
  • 발행 : 2016.03.25

초록

This paper presents the properties of pervious concrete containing high-calcium fly ash. The water to binder ratios of 0.19, 0.22, and 0.25, designed void ratios of 15, 20, and 25%, and fly ash replacements of 10, 20, and 30% were used. The results showed that the use of fly ash as partial replacement of Portland cement enhanced the mixing of paste resulting in a uniform mix and reduced amount of superplasticizer used in the mixture. The compressive strength and flexural strength of pervious concrete were slightly reduced with an increase in fly ash replacement level, while the abrasion resistance increased due mainly to the pozzolanic and filler effects. The compressive strength and flexural strengths at 28 days were still higher than 85% of the control concrete. The aggregate size also had a significant effect on the strength of pervious concrete. The compressive strength and flexural strength of pervious concrete with large aggregate were higher than that with small aggregate.

키워드

참고문헌

  1. Aamer Rafique Bhutta, M., Tsuruta, K. and Mirza, J. (2012), "Evaluation of high-performance pervious concrete properties", Constr. Build. Mater., 31, 67-73. https://doi.org/10.1016/j.conbuildmat.2011.12.024
  2. ACI Committee 522 (2010), ACI 522R-10 Report on pervious concrete, American Concrete Institute, Farmington Hills, MI, USA.
  3. ASTM C 39/C 39M-10 (2010), Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, Annual Book of ASTM Standards, 04.02, USA.
  4. ASTM C 78-10 (2010), Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading), Annual Book of ASTM Standards, 04.02, USA.
  5. ASTM C 618-08a (2008), Standard Test Method for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete, Annual Book of ASTM Standards, 04.02, USA.
  6. ASTM C 944/C 944M-12 (2012), Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method, Annual Book of ASTM Standards, 04.02, USA.
  7. ASTM C 1754/C 1754-12 (2012), Standard Test Method for Density and Void Content of Hardened Pervious Concrete, Annual Book of ASTM Standards, 04.02, USA.
  8. Chindaprasirt, P., Hatanaka, S., Chareerat, T., Mishima, N. and Yuasa, Y. (2008), "Cement paste characteristics and pervious concrete properties", Constr. Build. Mater., 22(5), 894-901. https://doi.org/10.1016/j.conbuildmat.2006.12.007
  9. Chindaprasirt, P., Hatanaka, T., Mishima, N., Yuasa, Y. and Chareerat, S. (2009), "Effects of binder strength and aggregate size on the compressive strength and void ratio of porous concrete", Int. J. Minerals Metall. Mater., 16(6), 714-9. https://doi.org/10.1016/S1674-4799(10)60018-0
  10. Delatte, N., Miller, D. and Mrkajic, A. (2007), Portland cement pervious concrete pavement: Field performance investigation on parking lot and roadway pavements, RMC Research & Education Foundation, Cleveland, Ohio, USA.
  11. Deo, O. and Neithalath, N. (2010), "Compressive behavior of pervious concretes and a quantification of the influence of random pore structure features", Mater. Sci. Eng., 528(1), 402-412. https://doi.org/10.1016/j.msea.2010.09.024
  12. Deo, O. and Neithalath, N. (2011), "Compressive response of pervious concrete proportioned for desired porosities", Constr. Build. Mater., 25(11), 4181-4189. https://doi.org/10.1016/j.conbuildmat.2011.04.055
  13. Golroo, A. and Tighe, S.L. (2011), "Alternative modeling framework for pervious concrete pavement condition analysis", Cement Concrete Res., 25(10), 4043-4051.
  14. Hatanaka, S., Mishima, N., Yuasa, Y., Maegawa, A., Nakagawa, T. and Kuroda, M. (2006), "Fundamentals and a few recent applications of environmentally friendly pervious concrete", International Conference on Pozzolan, Concrete and Geopolymer.
  15. Haselbach, L.M., Valavala, S. and Montes, F. (2006), "Permeability predictions for sand-clogged Portland cement pervious concrete pavement systems", J. Environ. Manage., 81(1), 42-49. https://doi.org/10.1016/j.jenvman.2005.09.019
  16. JIS Committee (1997), Physical Testing Methods for Cement (JIS R 5201), Japanese Industrial Standards, Japan.
  17. Kim, H.K. and Lee, H.K. (2010), "Influence of cement flow and aggregate type on the mechanical and acoustic characteristics of pervious concrete", Appl. Acoust., 71(7), 607-615. https://doi.org/10.1016/j.apacoust.2010.02.001
  18. Leming, M.L., Malcom, H.R. and Tennis, P.D. (2007), Hydrologic design of pervious concrete, Portland Cement Association (PCA), Skokie, Illinois, USA.
  19. Lian, C., Zhuge, Y. and Beecham, S. (2011), "The relationship between porosity and strength for pervious concrete", Constr. Build. Mater., 25(11), 4294-4298. https://doi.org/10.1016/j.conbuildmat.2011.05.005
  20. Limbachiya, M., Meddah, M.S. and Ouchagour, Y. (2012), "Use of recycled concrete aggregate in fly-ash concrete", Constr. Build. Mater., 27(1), 439-449. https://doi.org/10.1016/j.conbuildmat.2011.07.023
  21. Neithalath, N., Sumanasooriya, M.S. and Deo, O. (2010), "Characterizing pore volume, sizes, and connectivity in pervious concretes for permeability prediction", Mater. Charact., 61(8), 802-813. https://doi.org/10.1016/j.matchar.2010.05.004
  22. Park, S.B., Jang, Y.I., Lee, J. and Lee, B.J. (2009), "An experimental study on the hazard assessment and mechanical properties of pervious concrete utilizing coal bottom ash coarse aggregate in Korea", J. Hazard. Mater., 166(1), 348-355. https://doi.org/10.1016/j.jhazmat.2008.11.054
  23. Park, S.B. and Tia, M. (2004), "An experimental study on the water-purification properties of pervious concrete", Cement Concrete Res., 34(2), 177-184. https://doi.org/10.1016/S0008-8846(03)00223-0
  24. Putman, B.J. and Neptune, A.I. (2011), "Comparison of test specimen preparation techniques for pervious concrete pavements", Constr. Build. Mater., 25(8), 3480-3485. https://doi.org/10.1016/j.conbuildmat.2011.03.039
  25. Ramanathan, P., Baskar, I., Muthupriya, P. and Venkatasubramani, R. (2013), "Performance of selfcompacting concrete containing different mineral admixtures", KSCE J. Civil Eng., 17(2), 465-472. https://doi.org/10.1007/s12205-013-1882-8
  26. Rukzon, S. and Chindaprasirt, P. (2008), "Mathematical model of strength and porosity of ternary blend Portland rice husk ash and fly ash cement mortar", Comput. Concrete, 5(1), 1-6. https://doi.org/10.12989/cac.2008.5.1.001
  27. Sata, V., Khammathit, P. and Chindaprasirt, P. (2008), "Efficiency factor of high-calcium Class F fly ash in concrete", Comput. Concrete, 8(5), 583-595. https://doi.org/10.12989/cac.2011.8.5.583
  28. Shu, X., Huang, B., Wu, H., Dong, Q. and Burdette, E.G. (2011), "Performance comparison of laboratory and field produced pervious concrete mixtures", Constr. Build. Mater., 25(8), 3187-3192. https://doi.org/10.1016/j.conbuildmat.2011.03.002
  29. Siddique, R. (2003), "Effect of fine aggregate replacement with Class F fly ash on the abrasion resistance of concrete", Cement Concrete Res., 33(11), 1877-1881. https://doi.org/10.1016/S0008-8846(03)00212-6
  30. Siddique, R. (2004), "Performance characteristics of high-volume Class F fly ash concrete", Cement Concrete Res., 34(3), 487-493. https://doi.org/10.1016/j.cemconres.2003.09.002
  31. Siddique, R. and Khatib, J.M. (2010), "Abrasion resistance and mechanical properties of high-volume fly ash concrete", Mater. Struct., 43, 709-718. https://doi.org/10.1617/s11527-009-9523-x
  32. Silva, P. and De Brito, J. (2013), "Electrical resistivity and capillarity of self-compacting concrete with incorporation of fly ash and limestone filler", Adv. Concrete Constr., 1(1), 65-84. https://doi.org/10.12989/acc.2013.1.1.065
  33. Sumanasooriya, M.S. and Neithalath, N. (2011), "Pore structure features of pervious concretes proportioned for desired porosities and their performance prediction", Cement Concrete Compos., 33(8), 778-787. https://doi.org/10.1016/j.cemconcomp.2011.06.002
  34. Sunil, B.M., Manjunatha, L.S., Ravi, L. and Yaragal, S.C. (2015), "Potential use of mine tailings and fly ash in concrete", Adv. Concrete Constr., 3(1), 55-69. https://doi.org/10.12989/acc.2015.3.1.055
  35. Tamai, M., Mizuguchi, H., Hatanaka, S., Nakazawa, T., Yanagibashi, K. and Kunieda, M. (2004), "Design, construction and recent applications of pervious concrete in japan", Proceedings of the JCI Symposium on Design, Construction and Recent Applications of Pervious concrete, JCI., Tokyo, April.
  36. Tangpagasit, J., Cheerarot, R., Jaturapitakkul, C. and Kiattikomol, K. (2005), "Packing effect and pozzolanic reaction of fly ash in mortar", Cement Concrete Res., 35(6), 1145-1151. https://doi.org/10.1016/j.cemconres.2004.09.030
  37. Tennis, P.D., Leming, M.L. and Akers, D.J. (2004), Pervious Concrete Pavements, Portland Cement Association (PCA), Skokie, Illinois, USA.
  38. Tho-in, T., Sata, V., Chindaprasirt, P. and Jaturapitakkul, C. (2012), "Pervious high-calcium fly ash geopolymer concrete", Constr. Build. Mater., 30, 366-371. https://doi.org/10.1016/j.conbuildmat.2011.12.028
  39. Uchida, T., Ooyabu, K., Nakano, N. and Matsumoto, H. (2004), "A method of pervious concrete work for construction of high permeability steep revetment with permeable blocks", Proceedings of the JCI Symposium on Design, Construction and Recent Applications of Pervious concrete, Tokyo, April.
  40. Vimonsatit, V., Chindaprasirt, P., Ruangsiriyakul, S. and Sata, V. (2015), "Influence of fly ash fineness on water requirement and shrinkage of blended cement mortars", KKU Eng. J., 42(4), 311-316.
  41. Woo, S.K., Song, Y.C. and Won, J. (2011), "Enhanced durability performance of face slab concrete in concrete-faced rock-filled dam using fly ash and PVA fiber", KSCE J. Civil Eng., 15(5), 875-882. https://doi.org/10.1007/s12205-011-1231-8
  42. Yang, J. and Jiang, G. (2003), "Experimental study on properties of pervious concrete pavement materials", Cement Concrete Res., 33(3), 381-386. https://doi.org/10.1016/S0008-8846(02)00966-3
  43. Yen, T., Hsu, T.H., Liu, Y.W. and Chen, S.H. (2007), "Influence of class F fly ash on the abrasion-erosion resistance of high-strength concrete", Constr. Build. Mater., 21(2), 458-463. https://doi.org/10.1016/j.conbuildmat.2005.06.051
  44. Zaetang, Y., Wongsa, A., Sata, V. and Chindaprasirt, P. (2013), "Use of lightweight aggregates in pervious concrete", Constr. Build. Mater., 48, 585-591. https://doi.org/10.1016/j.conbuildmat.2013.07.077

피인용 문헌

  1. Development of Vegetation-Pervious Concrete in Grid Beam System for Soil Slope Protection vol.10, pp.12, 2017, https://doi.org/10.3390/ma10020096
  2. Mechanical properties, thermal conductivity, and sound absorption of pervious concrete containing recycled concrete and bottom ash aggregates 2018, https://doi.org/10.1007/s12205-017-0144-6
  3. Permeation properties of concretes incorporating fly ash and silica fume vol.19, pp.4, 2017, https://doi.org/10.12989/cac.2017.19.4.357
  4. Mechanical properties of pervious concrete with recycled aggregate vol.21, pp.6, 2016, https://doi.org/10.12989/cac.2018.21.6.623
  5. Effect of fly ash and metakaolin on pervious concrete properties vol.223, pp.None, 2016, https://doi.org/10.1016/j.conbuildmat.2019.06.185
  6. Moving particle simulation for a simplified permeability model of pervious concrete vol.24, pp.6, 2016, https://doi.org/10.12989/cac.2019.24.6.571
  7. A model to characterize the effect of particle size of fly ash on the mechanical properties of concrete by the grey multiple linear regression vol.26, pp.2, 2016, https://doi.org/10.12989/cac.2020.26.2.175
  8. Influence of binder, aggregate and compaction techniques on the properties of single-sized pervious concrete vol.10, pp.3, 2016, https://doi.org/10.12989/acc.2020.10.3.211
  9. Fineness of Coal Fly Ash for Use in Cement and Concrete vol.2, pp.4, 2016, https://doi.org/10.3390/fuels2040027