Journal of the Architectural Institute of Korea Structure & Construction (대한건축학회논문집:구조계)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

Stiffness Pressing force of Lightweight Inner Partition Wall as Long-life Housing Infill by Mock-Up Tests

현장 실험(Mock Up)을 통한 장수명 주택 인필로서의 세대내 경량벽체 수평하중저항성에 관한 연구

  • Received : 2015.12.03
  • Accepted : 2016.02.14
  • Published : 2016.02.29
⟨ Previous Next ⟩

Abstract

The purpose of the study is for the stiffness pressing force of lightweight inner partition wall as long-life housing infill. And it has suggestion possibility of lightweight inner partition wall has secure the enough resistibility thought the mock up. The main thrust of lightweight inner partition wall's variability. For secure the variability of lightweight inner partition wall, it needs to change the installation method of partition wall with upper and lower slab fixing method to floor and ceiling fixing method. Must be consideration of lightweight partition wall's stiffness pressing force performance criteria if change the installation method. Mock Up test results of the study, specimen #1 and #2 gypsum board was not possible to reach the performance criteria 3000N. But specimen #3 ALC Block evaluated to have stiffness pressing force 1000N even 3000N, as well as performance criteria. Also, specimen #4 for the lightweight partition wall between housing is suitable with fireproof gypsum board.

Keywords

Acknowledgement

Supported by : 국토교통부

References

  1. Architectural Institute of Korea (2015). Manual of Lightweight Wall
  2. Hwang, E. K., Park, S. R., Kim, S. A. (2014), A Basic Study of Introduction for the Certification System of Infill, Autumn Annual Conference Journal of the Korean Housing Association
  3. Kim, D. W., Yang, S. W., Lee. T. H., Cho, J. Y., An, C. H., Kim, Y. S. (2010), Development of a Self-assembling variable wall system for the efficiency of Efficient Spatial Planing in Apartment houses, Autumn Annual Conference Journal of Construction Engineering and Management
  4. Kwoun, M. J., Kim, J. J. (2010), A Study on the Flexible Infill System for the Sustainable Apartment, Autumn Annual Conference Journal of the Architectural Institute of Korea, 30(1), 179-180
  5. Lee, S. O., Kim, S. A. (2010), A Study on the Development and Application of Movable Partition Components for Facilitating of Long-life Housing, Journal of the Korean Housing Association, 21(6), 91-98 https://doi.org/10.6107/JKHA.2010.21.6.091
  6. Urban Research Institute, SH Corporation (2010), A Study onf the Lightweight Wall System for Life-long Housing