Composites Research

  • 제29권6호
  • /
  • Pages.328-335
  • /
  • 2016
  • /
  • 2288-2103(pISSN)
  • /
  • 2288-2111(eISSN)
한국복합재료학회 (The Korean Society for Composite Materials)
권호 표지
DOI QR코드

DOI QR Code

석회석 미분말을 혼입한 시멘트계 매트릭스 섬유복합재료의 설계 및 구조부재의 휨성능

Design of Fiber Reinforced Cement Matrix Composite Produced with Limestone Powder and Flexural Performance of Structural Members

  • Hyun, Jung-Hwan (Department of Civil Engineering, Chungnam National University) ;
  • Kim, Yun-Yong (Department of Civil Engineering, Chungnam National University)
  • 투고 : 2016.10.31
  • 심사 : 2016.12.27
  • 발행 : 2016.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

이 연구의 목적은 석회석 미분말을 사용하여 복합재료의 연성이 향상된 시멘트계 매트릭스 섬유복합재료(ECC)를 개발하고 이 재료로 제작된 구조부재의 휨성능을 평가하는 것이다. 재료 개발을 위하여 4가지 종류의 배합을 마이크로역학과 안정상태 균열 이론을 활용하였고, 이를 위하여 시멘트계 매트릭스의 파괴인성과 섬유-시멘트 매트릭스 경계면 특성을 파악하였다. 개발된 ECC의 1축 인장변형특성과 압축강도 특성이 실험적으로 평가되었다. 또한, 2개의 구조부재를 제작하여 휨실험을 수행하였고 그 결과를 재래식 콘크리트 구조부재의 성능과 비교하였다. 재료실험 결과로 석회석 미분말의 혼입률 증가에 따라 압축강도는 감소하지만 연성은 증가하였다. 부재 실험 결과, ECC 구조부재는 재래식 콘크리트 구조부재에 비하여 높은 휨연성, 높은 휨내력, 작은 균열폭을 나타내었다.

The purpose of this study is to develop fiber reinforced cement matrix composite (ECC) produced with limestone powder in order to achieve high ductility of the composite, and to evaluate flexural performance of structural members made with ECC. Four kinds of mixture proportions were determined on the basis of the micromechanics and a steady state cracking theory considering the matrix fracture toughness and fiber-matrix interfacial characteristics. The mechanical properties of ECC, represented by strain-hardening behavior in uniaxial tension, were investigated. Also, strength property of the composite was experimentally evaluated. Two structural members made with ECC were produced and tested. Test results were compared with those of conventional concrete structural members. Increased limestone powder contents of ECC provides higher ductility of the composites while generally resulting in a lower strength property. ECC structural members exhibited higher flexural ductility, higher flexural load-carrying capacity and tighter crack width compared to conventional structural members.

키워드

참고문헌

  1. Li, V.C., Wang, Y., and Backer, S., "A Micromechanical Model of Tension-Softening and Bridging Toughening of Short Random Fiber Reinforced Brittle Matrix Composites", J. Mechanics and Physics of Solids, Vol. 39, No. 5, 1991, pp. 607-625.. https://doi.org/10.1016/0022-5096(91)90043-N
  2. Marshal, D.B., and Cox, B.N., "A J-intergral Method for Calculating Steady-State Matrix Cracking Stresses in Composites," Mechanics of Materials, No.8, 1988, pp. 127-133. https://doi.org/10.1016/0167-6636(88)90011-7
  3. Kim, Y.Y., "Design and Constructibility of an Engineered Cementitious composite Produced with Cement-based Mortar Matrix and Synthetic Fibers," Composites Research, Vol. 20, No. 2, 2007, pp. 21-26.
  4. Government of Canada NRC, Energy Consumption Benchmark Guide, Cement Clinker Production Office of Energy Efficiency, 2009.
  5. Heikal, M., El-Didamon, H., and Morsy, M.S., "Limestone Filled Pozzolanic Cement", Cement and Concrete Research, 30, 2000, pp. 1827-1834. https://doi.org/10.1016/S0008-8846(00)00402-6
  6. Lee, M.S., Yun, C.H., and Choi, H.K., "Influence of Limestone Powder on the Hydration of Slag Cement", Proceedings of the Korea Concrete Institute, 1999, pp. 85-88.
  7. Lee, S.H., Lim, D.S., Lim, Y.J., and Lee, S.J., "Develpoment of Early Compressive Strength in Portland Cement by Lime Stone Powder", Proceedings of the Korea Concrete Institute, Vol. 24, No. 1, 2012, pp. 197-198.
  8. Lothenbach, B., Le Saout, G., Gallucci, E., and Scrivener, K., "Influence of Limestone on the Hydration of Portland Cements", Cement and Concrete Research, Vol. 38, 2008, pp. 848-860. https://doi.org/10.1016/j.cemconres.2008.01.002
  9. Oh, B.H., Park, D.G., Park, J.M., and Lee, J.H., "Mechanical and Durable Properties of Concrete Containing Slag and Limestone Powder", Proceedings of the Korea Concrete Institute, 2002, pp. 569-574.
  10. Tsivilisa, S., Tsantilasa, J., Kakalia, G., Chaniotakisb, E., and Sakellariou, A., "The Permeability of Portland Limestone Cement Concrete", Cement and Concrete Research, Vol. 33, 2003, pp. 1465-1471. https://doi.org/10.1016/S0008-8846(03)00092-9
  11. Voglis, N., Kakali, G., Chaniotakis, E., and Tsivilis, S., "Portland-limestone Cements. Their Properties and Hydration Compared to those of other Composite Cements", Cement and Concrete Composites, Vol. 27, No. 2, 2005, pp. 191-196. https://doi.org/10.1016/j.cemconcomp.2004.02.006
  12. Kim, Y.Y., Ha, K.J., and Shin, J.H., "Design of ECC(Engineered Cementitious Composite) Matrix Compositions Based on Micromechanics and Steady-State Cracking Theory," Journal of the Architectural Institute of Korea, Vol. 23, No. 5, 2007, pp. 11-19.
  13. Kim, J.K., and Kim, Y.Y., "Fatigue Crack Growth of High Strength Concrete in Wedge Splitting Test," Journal of Cement and Concrete Research, Vol. 29, 1999, pp. 705-712. https://doi.org/10.1016/S0008-8846(99)00025-3
  14. Lin, Z., Kanda, T., and Li, V.C., "On Interface Property Characterization and Performance of Fiber Reinforced CementitiousComposites," Journal of Cement science and Engineering, Vol. 1, 1999, pp. 173-184.