Advances in Energy Research

  • 제4권4호
  • /
  • Pages.299-323
  • /
  • 2016
  • /
  • 2287-6316(pISSN)
  • /
  • 2287-6324(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Modeling and validation of a parabolic solar collector with a heat pipe absorber

  • Ismail, Kamal A.R. (Faculty of Mechanical Engineering, Department of Energy, State University of Campinas) ;
  • Zanardi, Mauricio A. (Faculty of Mechanical Engineering, Department of Energy, State University of Campinas) ;
  • Lino, Fatima A.M. (Faculty of Mechanical Engineering, Department of Energy, State University of Campinas)
  • 투고 : 2016.01.15
  • 심사 : 2016.12.07
  • 발행 : 2016.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

Cylindrical parabolic solar concentrators of small concentration ratio are attractive options for working temperatures around $120^{\circ}C$. The heat gained can be utilized in many applications such as air conditioning, space heating, heating water and many others. These collectors can be easily manufactured and do not need to track the sun continuously. Using a heat pipe as a solar absorber makes the system more compact and easy to install. This study is devoted to modeling a system of cylindrical parabolic solar concentrators of small concentration ratio (around 5) fitted with a heat pipe absorber with a porous wick. The heat pipe is surrounded by evacuated glass tube to reduce thermal losses from the heat pipe. The liquid and vapor flow equations, energy equation, the internal and external boundary conditions were taken into consideration. The system of equations was solved and the numerical results were validated against available experimental and numerical results. The validated heat pipe model was inserted in an evacuated transparent glass tube as the absorber of the cylindrical parabolic collector. A calculation procedure was developed for the system, a computer program was developed and tested and numerical simulations were realized for the whole system. An experimental solar collector of small concentration, fitted with evacuated tube heat pipe absorber was constructed and instrumented. Experiments were realized with the concentrator axis along the E-W direction. Results of the instantaneous efficiency and heat gain were compared with numerical simulations realized under the same conditions and reasonably good agreement was found.

키워드

참고문헌

  1. Arab, M. and Abbas, A. (2013), "Model-based design and analysis of heat pipe working fluid for optimal performance in a concentric evacuated tube solar water heater", Sol. Energy, 94, 162-176. https://doi.org/10.1016/j.solener.2013.03.029
  2. Ayompe, L.M. and Duffy, A. (2013), "Thermal performance analysis of a solar water heating system with heat pipe evacuated tube collector using data from a field trial", Sol. Energy, 90, 17-28. https://doi.org/10.1016/j.solener.2013.01.001
  3. Azad, E. and Bahan, F. (1991), "The thermal performance of a co-axial heat pipe solar collector", J. Inst. Energy, 64, 107-112.
  4. Azad, E., Bahar, F. and Moztarzadeh, F. (1987), "Solar water heater using gravity assisted heat pipe", Heat Recov. Syst. CHP, 7(4), 343-350. https://doi.org/10.1016/0890-4332(87)90096-2
  5. Biencinto, M., Gonzalez, L. and Valenzuela, L. (2016), "A quasi-dynamic simulation model for direct steam generation in parabolic troughs using TRNSYS", Appl. Energy, 161, 133-142. https://doi.org/10.1016/j.apenergy.2015.10.001
  6. Cabrera, F.J., Fernandez-Garcia, A., Silva, R.M.P. and Perez-Garcia, M. (2013), "Use of parabolic trough solar collectors for solar refrigeration and air-conditioning applications", Renew. Sustain. Energy Rev., 20, 103-118. https://doi.org/10.1016/j.rser.2012.11.081
  7. Chi, S.W. (1976), Heat Pipe-Theory and Practice: A Source Book, Hemisphere Publishing Corporation.
  8. Chong, K.K., Chay, K.G. and Chin, K.H. (2012), "Study of a solar water heater using stationary v-trough collector", Renew. Energy, 39(1), 207-215. https://doi.org/10.1016/j.renene.2011.08.002
  9. Chun, W., Kang, Y.H., Kwak, H.Y. and Lee, Y.S. (1999), "An experimental study of the utilization of heat pipes for solar water heaters", Appl. Therm. Eng., 19(8), 807-817. https://doi.org/10.1016/S1359-4311(98)00096-9
  10. Conrado, L.S., Rodriguez-Pulido, A. and Calderon, G. (2017), "Thermal performance of parabolic trough solar collectors", Renew. Sustain. Energy Rev., 67, 1345-1359. https://doi.org/10.1016/j.rser.2016.09.071
  11. Duffie, J.A. and Beckman, W.A. (2013), "Solar engineering of thermal processes", Renew. Sustain. Energy Rev., 54, 1085-1091.
  12. Gari, H.A. and Fathalah, K.A. (1988), "Modeling and simulation of a passive condensate heat pipe pumping system for solar energy applications", Heat Recov. Syst. CHP, 8(6), 559-569. https://doi.org/10.1016/0890-4332(88)90015-4
  13. Ghaddar, N. and Nasr, Y. (1998), "Experimental study of a refrigerant charged solar collector", J. Energy Res., 22, 625-638. https://doi.org/10.1002/(SICI)1099-114X(19980610)22:7<625::AID-ER388>3.0.CO;2-3
  14. Guo, J., Huai, X. and Liu, Z. (2016), "Performance investigation of parabolic trough solar receiver", Appl. Therm. Eng., 95, 357-364. https://doi.org/10.1016/j.applthermaleng.2015.11.035
  15. Hachicha, A.A., Rodriguez, I., Capdevila, R. and Oliva, A. (2013), "Heat transfer analysis and numerical simulation of a parabolic trough solar collector", Appl. Energy, 111, 581-592. https://doi.org/10.1016/j.apenergy.2013.04.067
  16. Hussein, H.M.S., Mohamad, M.A. and El-Asfouri, A.S. (1999), "Optimization of a wickless heat pipe flat plate solar collector", Energy Convers. Manage., 40(18), 1949-1961. https://doi.org/10.1016/S0196-8904(99)00082-5
  17. Ismail, K.A.R. and Zanardi, M.A. (1990), "Cylindrical parabolic solar collector with heat pipe absorber", Proceedings of the World Renewable Energy Congress, Reading, UK, 2, 1242-1246.
  18. Ismail, K.A.R. and Zanardi, M.A. (1993), "Experimental verification of a two-dimensional model for porous wicked heat pipes", Proceedings of the III World Conference on Experimental Heat Transfer, Fluid Mechan. Thermodyn., Honolulu, Hawaii, 427-432.
  19. Jebasingh, V.K. and Herbert, G.M.J. (2016), A Review of Solar Parabolic Trough Collector, 4th Edition, John Wiley & Sons, Inc.
  20. Kim, Y. and Seo, T. (2007), "Thermal performances comparisons of the glass evacuated tube solar collectors with shapes of absorber tube", Renew. Energy, 32(5), 772-795. https://doi.org/10.1016/j.renene.2006.03.016
  21. Kreith, F., Manglik, R.M. and Bohn, M.S. (2011), Principles of Heat Transfer, 7th Edition, Cengage Learning Inc.
  22. Kumar, K.R. and Reddy, K.S. (2009), "Thermal analysis of solar parabolic trough with porous disc receiver", Appl. Energy, 86(9), 1804-1812. https://doi.org/10.1016/j.apenergy.2008.11.007
  23. Liang, H., You, S. and Zhang, H. (2015), "Comparison of different heat transfer models for parabolic trough solar collectors", Appl. Energy, 148, 105-114. https://doi.org/10.1016/j.apenergy.2015.03.059
  24. McAdams, W.J. (1954), Heat Transmission, 3rd Edition, McGraw Hill.
  25. McKinney, B.G. (1969), "An experimental and analytical study of water heat pipes for moderate temperature ranges", NASA TM-53849.
  26. Nkwetta, D.N., Smyth, M., Zacharopoulos, A. and Hyde, T. (2012), "In-door experimental analysis of concentrated and non-concentrated evacuated tube heat pipe collectors for medium temperature applications", Energy Build., 47, 674-681. https://doi.org/10.1016/j.enbuild.2012.01.010
  27. Ortobasi, U. and Buehl, W.M. (1980), "An internal cusp reflector for an evacuated tubular heat pipe solar thermal collector", Sol. Energy, 25(1), 67-78. https://doi.org/10.1016/0038-092X(80)90407-7
  28. Padilla, R.V., Demirkaya, G., Goswami, D.Y., Stefanakos, E. and Rahman, M.M. (2011), "Heat transfer analysis of parabolic trough solar receiver", Appl. Energy, 88(12), 5097-5110. https://doi.org/10.1016/j.apenergy.2011.07.012
  29. Ramsey, J.W., Gupta, B.P. and Knowles, G.R. (1977), "Experimental evaluation of a cylindrical parabolic solar collector", J. Heat Transf., 99(2), 163-168. https://doi.org/10.1115/1.3450663
  30. Ratzel, A.C., Hickox, C.E. and Gartling, D.K. (1979), "Techniques for reducing thermal conduction and natural convection heat losses in annular receiver geometries", J. Heat Transf., 101(1), 108-113. https://doi.org/10.1115/1.3450899
  31. Redpath, D.A.G., Eames, P.C., Lo, S.N.G. and Griffths, P.W. (2009), "Experimental investigation of natural convection heat exchange within a physical model of the manifold chamber of a thermo-syphon heat pipe evacuated tube solar water heater", Sol. Energy, 83(7), 988-997. https://doi.org/10.1016/j.solener.2009.01.002
  32. Tien, C.L. and Rohani, R. (1972), "Theory of two component heat pipe", J. Heat Transf., 94(4), 479-484. https://doi.org/10.1115/1.3449971
  33. Umarov, G.I., Zakhidov, R.A. and Khodzhaev, A.S. (1976), "Radiant vector distribution in the radiant field of a parabolic cylindrical concentrator", Geliotekhnika, 12, 27-32.
  34. Vafai, K. and Tien, C.L. (1981), "Boundary and inertia effects on flow and heat transfer in porous media", J. Heat Mass Transf., 24(2), 195-203. https://doi.org/10.1016/0017-9310(81)90027-2
  35. Vasiliev, L.L., Grakovich, L.P. and Khrustaler, D.K. (1984), "Optimization of flat plate solar energy heat pipe collector parameters", Heat Recov. Syst. CHP, 1(3), 157-164.
  36. Wang, Y., Zhu, Y., Chen, H., Zhang, X., Yang, L. and Liao, C. (2015), "Performance analysis of a novel sun-tracking CPC heat pipe evacuated tubular collector", Appl. Therm. Eng., 87, 381-388. https://doi.org/10.1016/j.applthermaleng.2015.04.045
  37. Wong, H.H. and Raithby, G.D. (1979), "Improved finite difference methods based on critical evaluation of the approximation errors", Numer. Heat Transf., 2(2), 139-163. https://doi.org/10.1080/10407787908913404
  38. Zou, B., Dong, J., Yao, Y. and Jiang, Y. (2016), "An experimental investigation on a small-sized parabolic trough solar collector for water heating in cold areas", Appl. Energy, 163, 396-407 https://doi.org/10.1016/j.apenergy.2015.10.186

피인용 문헌

  1. Prioritizing the locations for hydrogen production using a hybrid wind-solar system: A case study vol.5, pp.2, 2017, https://doi.org/10.12989/eri.2017.5.2.107
  2. Localization of solar-hydrogen power plants in the province of Kerman, Iran vol.5, pp.2, 2016, https://doi.org/10.12989/eri.2017.5.2.179
  3. Algorithm for sizing parabolic-trough solar collectors vol.24, pp.None, 2021, https://doi.org/10.1016/j.tsep.2021.100932