한국전자통신학회논문지 (The Journal of the Korea institute of electronic communication sciences)

한국전자통신학회 (Korea Institute of Electronic Communication Science)
권호 표지
DOI QR코드

DOI QR Code

회생전력 기능을 갖는 전기부하시험장치 개발

Developement of Electrical Load Testing System Implemented with Power Regenerative Function

  • 도왕록 (계명대학교 전자컴퓨터공학) ;
  • 채용웅 (계명대학교 전자컴퓨터공학)
  • 투고 : 2015.11.16
  • 심사 : 2016.02.24
  • 발행 : 2016.02.25
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구를 통해 개발된 전기부하시험장치는 상용전원이 필요한 피시험장치(변압기, 정류기, 전압조정기, 인버터 등)와 상용전원이 불필요한 독립형 피시험장치(동력발전기, 풍력발전장치, 태양광발전장치, 하이브리드발전 장치, 배터리 등)에 대하여 정격용량시험이나 가변부하시험을 능동적으로 정밀하게 제어하면서도 시험 중에 사용되는 전기에너지를 소비하지 않고 전원변환장치를 통하여 계통선으로 전달하도록 설계되었다. 동기식 pwm 인버터회로를 상용전원과 연결시켜서 시험에 사용되는 전력을 계통선으로 귀환되도록 설계되었으며, 종전의 수동식 전기저항체를 사용한 전기부하시험장치에 비해 93.4% 정도의 전력을 소모하지 않고도 피시험체에 대한 시험이 가능하도록 하였다.

The electrical load testing system developed from this study was designed to control rated-capacity-testing or variable-load-testing in an active and precise manner and save electric energy during testing, and also to convert the saved electric energy through the electrical load testing system to grid line. As for the device under testing, it was designed to be applied to not only transformer, rectifier, voltage regulator, inverter which require grid voltage source but, also applied to electric power, aerogenerator, photovoltaic, hybrid generator, battery, etc. which do not require grid voltage source. The system was designed to return the power consumed during the testing to the grid line by connecting the synchronizing pwm inverter circuit to the grid voltage source, and was also made to enable the being-tested system from disuse of approximately 93.4% energy when compared to the conventional load testing system which has used the passive resistor.

키워드

참고문헌

  1. E. Adzic, V. Porobic, B. Dumnic, N. Celanovic, and V. Katic;, "PLL Synchronization in grid-connected converters," The 6th Univ. of Novi Sad-Univ. of Novi Sad Int. Conf. on engineering and technology, Novi Sad, Serbia, May, 2013, pp. 1-5.
  2. E. Adzic, D. Marcetic, V. Katic, and M. Adzic, "Grid-connected Voltage Source Converter under Distorted Grid Voltage," In Proc. IEEE European Power Electronics-Power Electronics and Motion Control 2010, Ohrid, Sept. 2010.
  3. A. Timbus, R. Teodorescu, F. Blaabjerg, and M. Liserre, "Synchronization Methods for Three Phase Distributed Power Generation Systems. An Overview and Evaluation," In Proc. IEEE Power Electronics Specialists 2005, Vancouver), June 2005, pp. 2474-2481.
  4. R. Sinha and P. Sensarma, "A pre-filter based PLL for three-phase grid connected applications," Electric Power Systems Research, vol. 81, no.1, July 2010, pp. 129-137. https://doi.org/10.1016/j.epsr.2010.07.020
  5. H. Awad, J. Svensson, and M. J. Bollen, "Tuning Software Phase-Locked Loop for Series-Connected Converters," IEEE Trans. Power Delivery, vol. 20, no. 1, Jan. 2005, pp. 300-308.
  6. S. Kim, "An Integer-N PLL frequency Synthesizer Design for the 900MHz UHF RFID Application," J. of the Korea Institute of Electronic Communication Science, vol. 4, no. 4, Dec. 2009, pp. 247-252.
  7. K. Kim and J. Chong, "Mesochronous Clock Based Synchronizer Design for NoC," J. of the Korea Institute of Electronic Communication Science, vol. 10, no. 10, Oct. 2015, pp. 1123-1130. https://doi.org/10.13067/JKIECS.2015.10.10.1123
  8. Y. Chai and W. Do, "Development of a programmable multi-output adapter," J. of the Korea Institute of Electronic Communication Science, vol. 10, no. 6, June 2015, pp. 699-706. https://doi.org/10.13067/JKIECS.2015.10.6.699
  9. S. Kim, "A Study on Cooling System for Efficiency Improvements of 3kW Outdoor Type Photovoltaic Inverter," J. of the Korea Institute of Electronic Communication Science, vol. 9, no. 5, June 2014, pp. 617-623. https://doi.org/10.13067/JKIECS.201.9.5.617