DOI QR코드

DOI QR Code

An approach to design and fabrication of resonant giant magnetostrictive transducer

  • Sheykholeslami, Mohammad R. (Department of Mechanical Engineering, Faculty of Engineering, Arak University) ;
  • Hojjat, Yousef (Mechanical Eng., Dep., Tech and Eng. Faculty, Tarbiat Modares University) ;
  • Cinquemani, Simone (Department of Mechanical Engineering, Politecnico di Milano) ;
  • Ghodsi, Mojtaba (Mechanical and Industrial Eng., Dep., College of Eng. Sultan Qaboos University) ;
  • Karafi, M. (Mechanical Eng., Dep., Tech and Eng. Faculty, Tarbiat Modares University)
  • Received : 2015.03.25
  • Accepted : 2015.12.20
  • Published : 2016.02.25

Abstract

The paper provides a comprehensive procedure for the mechanical and magnetic design of Langevin transducer based on giant magnetostrictive material. The the transducer is designed to work at its second mode of vibration, having high mechanical quality factor and low damping coefficient. The design procedure is based on an analytical model and it is verified by finite-element analysis. Experimental tests based on impedance response analysis in first and second modes are carried out on the prototype. Results confirm the appropriate design of this transducer, demonstrating the highest mechanical quality factor between the resonant transducers in the literature.

Keywords

References

  1. Amir, A., Mohsen, S. and Abbas, P. (2007), "An approach to design a high power piezoelectric ultrasonic transducer", J. Electroceram, 22(4), 369-382. https://doi.org/10.1007/s10832-007-9408-8
  2. Calkins, F.T., Dapino, M.J. and Flatau, A.B. (1997), "Effect of prestress on the dynamic performance of a terfenol-D transducer", Proceedings of the Smart Structures and Materials, San Diego, CA, art.3041-23.
  3. Claeyssen, F., Boucher, D. and Pohlenz, C. (1988), "Application of magnetostrictive rare earth-iron alloys to sonar transducers", Proceedings of UDT88, London.
  4. Dilsha, K.R., Markandyulu, G., Subrahmanyeswara, B.V.P. and Rama Rao, K.V.S. (1997), "Design and fabrication of low frequency giant magnetostrictive transducer", J. Alloy Compound, 258(1-2), 53-55. https://doi.org/10.1016/S0925-8388(97)90491-6
  5. Engdahl, G. (2000), Handbook of Giant Magnetostrictive Material, Royal Institute of Technology, Stockholm Sweden.
  6. Grunwald, A. and Olabi, A.G. (2008), "Design of a Magnetostrictive (MS) actuator", Sensor. Actuat.-A Phys., 144(1), 161-175. https://doi.org/10.1016/j.sna.2007.12.034
  7. Karafi, M.R., Hojjat, Y. and Sassani, F. (2013), "A new hybrid longitudinal-torsional magnetostrictive ultrasonic transducer", Smart Mater. Struct., 22(6), 065013. https://doi.org/10.1088/0964-1726/22/6/065013
  8. Karunanidahi, S. and Singaperumal, M. (2010), "Design, analysis and simulation of magnetostrictive actuator and its application to high dynamic servo valve", Sensor. Actuat.-A Phys., 157(2), 185-197. https://doi.org/10.1016/j.sna.2009.11.014
  9. Krautkramer, J. and Krautkramer, H. (1990), Ultrasonic Testing of Material, Springer-Verlag, Berlin.
  10. Markov, A.I. (1996), Ultrasonic machining of intractablematerials, Iliffe Books, London.
  11. Olabi A.G., Grunwald A. (2008), "Design and application of magnetostrictive materials", Material & Design, 29(2), 469-483. https://doi.org/10.1016/j.matdes.2006.12.016
  12. Sheykholeslami, M., Hojjat, Y., Cinquemani, S. and Ghodsi, M. (2015), "Design and simulation of multi-resonance sonic transducer using Terfenol-D", In SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring (pp. 94353G-94353G). International Society for Optics and Photonics.
  13. Sheykholeslami, M., Hojjat, Y., Ghodsi, M. and Cinquemani, S. (2015), "Comparative discussion between first and second modes of Terfenol-D transducer", In SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring (pp. 94353H-94353H). International Society for Optics and Photonics.
  14. Sheykholeslami, M., Hojjat, Y., Ghodsi, M., Kakavand, K. and Cinquemani, S. (2015), "Investigation of ${\Delta}$E effect on vibrational behavior of giant magnetostrictive transducers", J. Shock Vib.
  15. Sheykholeslami, M., Hojjat, Y., Ghodsi, M., Zeighami, M. and Kakavand, K. (2016), "Effect of magnetic field on mechanical properties in Permendur", Mater. Sci. Eng., 651, 598-603. https://doi.org/10.1016/j.msea.2015.10.027
  16. Son, D. and Cho, Y. (1999), "Under water sonar transducer using terfenol-D magnetostrictive material", J. Magnetics, 4(3), 98-101.
  17. Wang, L., Tan, J.B. and Zhang, S. (2010), "A giant magnetostrictive actuator based on use of permanent magnet", Int. J. Adv. Manufact. Technol., 46(9-12), 893-897. https://doi.org/10.1007/s00170-009-2177-6
  18. Wenjing, L., Zhou, L. and Xia, T. (2006), "Rare earth ultrasonic transducer technique research", Proceedings of the Ultrasonic2006.
  19. Wing, S.O., Young, C.S. and Yin, L.C. (2006), "A 64-kHz sandwich transducer fabricated using psedo 1-3 magnetostictive composite", IEEE T. On Magnetic, 42(1), 47-50. https://doi.org/10.1109/TMAG.2005.855328

Cited by

  1. Design and numerical simulation of novel giant magnetostrictive ultrasonic transducer vol.7, 2017, https://doi.org/10.1016/j.rinp.2017.10.010
  2. Parameter identification based on modified simulated annealing differential evolution algorithm for giant magnetostrictive actuator vol.8, pp.1, 2018, https://doi.org/10.1063/1.5009956
  3. Measurement of the Length of Installed Rock Bolt Based on Stress Wave Reflection by Using a Giant Magnetostrictive (GMS) Actuator and a PZT Sensor vol.17, pp.3, 2017, https://doi.org/10.3390/s17030444
  4. The Design of Rare-Earth Giant Magnetostrictive Ultrasonic Transducer and Experimental Study on Its Application of Ultrasonic Surface Strengthening vol.9, pp.3, 2018, https://doi.org/10.3390/mi9030098
  5. Study on the rare-earth giant magnetostrictive actuator based on experimental and theoretical analysis vol.460, pp.None, 2018, https://doi.org/10.1016/j.jmmm.2018.01.047
  6. Power ultrasound and its applications: A state-of-the-art review vol.62, pp.None, 2016, https://doi.org/10.1016/j.ultsonch.2019.104722
  7. Variable coefficient magnetic energy loss calculating model for magnetostrictive materials considering compressive stress vol.11, pp.3, 2021, https://doi.org/10.1063/5.0042810