참고문헌
- D. M. Lee, "Position estimator employing Kalman filter for PM motors driven with Binary-type Hall sensors," J. Elec. Eng. & Tech., Vol. 11, No. 4, pp. 931-938, Jul. 2016. https://doi.org/10.5370/JEET.2016.11.4.931
- D. M. Lee, D. C. Lim, and H. J. Ahn, "Position linearisation scheme for permanent magnet synchronous motor drive of washing machine using low-resolution hall sensors," IET Electronics Letters, Vol. 51, No. 22, pp. 1765-1767, Oct. 2015. https://doi.org/10.1049/el.2015.1878
- X. Song, J. Fang, B. Han, and S. Zheng, "Adaptive compensation method for high-speed surface PMSM sensorless drives of EMF-based position estimation error," IEEE Trans. Power Electron., Vol. 31, No. 2, pp. 1438-1449, Feb. 2016. https://doi.org/10.1109/TPEL.2015.2423319
- C. X. Chen, Y. X. Xie, and Y. H. Lan, "Backstepping control of speed sensorless permanent magnet synchronous motor based on slide model observer," Inter. Journal of Automation and Computing, Vol. 12, No. 2, pp 149-155, Apr. 2015. https://doi.org/10.1007/s11633-015-0881-2
- Y. Zhao, W. Qiao, and L. Wu, "Dead-time effect analysis and compensation for a sliding-mode position observer-based sensorless IPMSM control System," IEEE Trans. Ind. Appl., Vol. 51, No. 3, pp. 2528-2535, May/Jun. 2015. https://doi.org/10.1109/TIA.2014.2372094
- M. Seilmeie and B. Piepenbreier, "Sensorless control of PMSM for the whole speed range using two-degree of freedom current control and HF test current injection for low-speed range," IEEE Trans. Power Electron., Vol. 30, No. 8, pp. 4394-4403, Aug. 2015. https://doi.org/10.1109/TPEL.2014.2353215
- Z. Zheng, Y. Li, X. Xiao, and M. Fadel, "Mechanical sensorless control of SPMSM based on HF signal injection and Kalman filter electrical machines and systems," ICEMS, pp. 1385-1390, 2008.
- O. A. Mohammed, A. A. Khan, A. M. El-Tallawy, A. Nejadpak, and M. J. Roberts, "A wavelet filtering scheme for noise and vibration reduction in high-frequency signal injection-based sensorless control of PMSM at low speed," IEEE Trans. Energy Convers., Vol. 27, No. 2, pp. 250-260, Jun. 2012. https://doi.org/10.1109/TEC.2011.2181995
- Y. Kano, T. Kosaka, N. Matsui, T. Takahashi, and M. Fujitsuna, "Signal-injection-based sensorless IPM traction drive for wide-torque range operation at low speed," ECCE, pp. 2284-2291, 2012.
- J. M. Liu and Z. Q. Zhu, "Novel sensorless control strategy with injection of high-frequency pulsating carrier signal into stationary reference frame," IEEE Trans. Ind. Appl., Vol. 50, No. 4, pp. 2574-2583, Jul./Aug. 2014. https://doi.org/10.1109/TIA.2013.2293000
- C. H. Choi and J. K. Seok, "Pulsating signal injection-based sensorless control of PMSM using injection axis switching scheme without additional offline commissioning test," IAS Annual Meeting, pp. 2365-2370, 2007.
- A. Piippo, M. Hinkkanen, and J. Luomi, "Sensorless control of PMSM drives using a combination of voltage model and HF signal injection," IAS Annual Meeting, pp. 964-970, Vol.2, 2004.
- H. Zhu, X. Xiao, and Y. Li, "A simplified high frequency injection method for PMSM sensorless control," IPEMC, pp. 401-405, 2009.
- W. Limei and G. Qinging, "Principles and implementation of permanent magnet synchronous motor zero-speed sensorless control advanced motion control," Inter. Workshop on Advanced Motor Control, pp. 247-250, 2002.
- R. Mizutani, T. Takeshita, and N. Matsui, "Current model-based sensorless drives of salient-pole PMSM at low speed and standstill," IEEE Trans. Ind. Appl., Vol. 34, No. 4, pp. 841-846, Jul./Aug. 1998. https://doi.org/10.1109/28.703990
- N. Matsui, "Sensorless PM Brushless DC motor drives," IEEE Trans. Ind. Electron., Vol. 43, No. 2, pp. 300-308, Apr. 1996. https://doi.org/10.1109/41.491354
- Y. S. Jeong, R. D. Lorenz, T. M. Jahns, and S. K. Sul, "Initial rotor position estimation of an interior permanent-magnet synchronous machine using carrier-frequency injection methods," IEEE Trans. Ind. Appl., Vol. 41, No. 1, pp. 38-45, Jan./Feb. 2005. https://doi.org/10.1109/TIA.2004.840978