DOI QR코드

DOI QR Code

Evaluation of Low Power and High Speed CMOS Current Comparators

  • Rahman, Labonnah Farzana (Department of Electrical, Electronic and Systems Engineering, Faculty of Engineering and Build Environment, Universiti Kebangsaan Malaysia) ;
  • Reaz, Mamun Bin Ibne (Department of Electrical, Electronic and Systems Engineering, Faculty of Engineering and Build Environment, Universiti Kebangsaan Malaysia) ;
  • Marufuzzaman, Mohammad (Department of Electrical, Electronic and Systems Engineering, Faculty of Engineering and Build Environment, Universiti Kebangsaan Malaysia) ;
  • Mashur, Mujahidun Bin (Department of Electrical, Electronic and Systems Engineering, Faculty of Engineering and Build Environment, Universiti Kebangsaan Malaysia) ;
  • Badal, Md. Torikul Islam (Department of Electrical, Electronic and Systems Engineering, Faculty of Engineering and Build Environment, Universiti Kebangsaan Malaysia)
  • 투고 : 2016.03.04
  • 심사 : 2016.08.01
  • 발행 : 2016.12.25

초록

Over the past few decades, CMOS current comparators have been used in a wide range of applications, including analogue circuits, MVL (multiple-valued logic) circuits, and various electronic products. A current comparator is generally used in an ADC (analog-to-digital) converter of sensors and similar devices, and several techniques and approaches have been implemented to design the current comparator to improve performance. To this end, this paper presents a bibliographical survey of recently-published research on different current comparator topologies for low-power and high-speed applications. Moreover, several aspects of the CMOS current comparator are discussed regarding the design implementation, parameters, and performance comparison in terms of the power dissipation and operational speed. This review will serve as a comparative study and reference for researchers working on CMOS current comparators in low-power and high-speed applications.

키워드

참고문헌

  1. D. A. Freitas and K. W. Current, Electronics Letters, 19, 695 (2011). [DOI: http://dx.doi.org/10.1049/el:19830474]
  2. H. Traff, IET, 28, 310 (1992). [DOI: http://dx.doi.org/10.1049/el:19920192]
  3. J. R. Angulo, IEEE Transactions On Circuits And Systems-11: Analog and Digital Signal Processing, 39, 883 (1992). [DOI: http://dx.doi.org/10.1109/82.208587]
  4. X. Tang and K. P. Pun, IET, 30, 5 (1994). [DOI: http://dx.doi.org/10.1049/el.2009.1419]
  5. W. C. Yu, C. C. Cheng, and C. J. Jer, IEEE Journal of Solid-State Circuits, 30, 522 (1995). [DOI: http://dx.doi.org/10.1109/4.384165]
  6. L. F. Rahman, M.B.I. Reaz, C. C. Yin, M.A.M. Ali, and M. Marufuzzaman, PloS one, 9, 1 (2014). [DOI: http://dx.doi.org/10.1371/journal.pone.0108634]
  7. J. H. Kim, J. B. Shin, J. Y. Sim, and H. J. Park, IEEE Transactions On Circuits And Systems-11: Express Brief, 58, 269 (2011). [DOI: http://dx.doi.org/10.1109/TCSII.2011.2124830]
  8. S. Danesh, J. Hurwitz, K. Findlater, D. Renshaw, and R. Henderson, IEEE Journal of Solid-State Circuits, 48, 733 (2013). [DOI: http://dx.doi.org/10.1109/JSSC.2013.2237672]
  9. Z. Ignjatovic, D. Maricic, and M. F. Bocko, IEEE Sensors Journal, 12, 737 (2012). [DOI: http://dx.doi.org/10.1109/JSEN.2011.2158818]
  10. C. C. Chen and C. Y. Wu, Analog and Digital Signal Processing, 45, 28 (1998). [DOI: http://dx.doi.org/10.1109/82.659454]
  11. D. Macq and P.G.A. Jespers, IEEE Journal of Solid-State Circuits, 29, 967 (1994). [DOI: http://dx.doi.org/10.1109/4.297705]
  12. S. J. Daubert and D.Vallancourt, IEEE Journal of Solid-State Circuits, 27, 821 (1992). [DOI: http://dx.doi.org/10.1109/4.133173]
  13. R. H. Zele, D. J. Allstot, and T. S. Fiez, IEEE Journal of Solid-State Circuits, 28, 569 (1994). [DOI: http://dx.doi.org/10.1109/4.229398]
  14. C. K. Wayne, IEEE Journal of Solid-State Circuits, 29, 95 (1992). [DOI: http://dx.doi.org/10.1109/4.272112]
  15. A. A. Hussain, E. Hassan, and I. Mohammed, IEEE Transactions on Circuits And Systems-11:Analog And Digital Signal Processing, 50, 278 (2003). [DOI: http://dx.doi.org/10.1109/TCSII.2003.812911]
  16. M. Nikolic, R. Enne, B. Goll, and H. Zimmermann, IEEE Transactions on Power Electronics, 28, 4910 (2013). [DOI: http://dx.doi.org/10.1109/TPEL.2013.2248066]
  17. G. Palmisano and G. Palumbo, IEEE Transactions On Circuits And Systems-11: Analog And Digital Signal Processing, 43, 785 (1996). [DOI: http://dx.doi.org/10.1109/82.553392]
  18. C. H. Lee, C. Jack, M. Kelly, and C. J. John, IEEE Transactions On Circuits And Systems-11: Analog And Digital Signal Processing, 45, 626 (1998). [DOI: http://dx.doi.org/10.1109/82.673645]
  19. G. Palmisano and S. Pennisi, IEEE Transactions On Circuits And Systems-11: Analog And Digital Signal Processing, 47, 1569 (2000). [DOI: http://dx.doi.org/10.1109/82.899658]
  20. C. Reza and H. Omid, Science Direct Int. J. Commun. (AEU), 65, 949 (2011). [DOI: http://dx.doi.org/10.1016/j.aeue.2011.03.008]
  21. B. Jonsson and S. Eriksson, IEEE Transactions on Circuits and Systems-11: Analog and Digital Signal Processing, 45, 1508 (1998). [DOI: http://dx.doi.org/10.1109/82.735364]
  22. S. Y. Lee and C. J. Cheng, IEEE Transactions On Circuits And Systems-11: Analog And Digital Signal Processing, 53, 2628 (2006). [DOI: http://dx.doi.org/10.1109/TCSI.2006.883854]
  23. W. Apisak, B. H. John, and T. Chris, IEEE Transactions on Circuits and Systems-11: Analog And Digital Signal Processing, 50, 649 (2003). [DOI: http://dx.doi.org/10.1109/TCSII.2003.816931]
  24. M. Helfenstein and G. S. Moschytz, IEEE Transactions on Circuits and Systems-11: Analog and Digital Signal Processing, 45, 739 (1998). [DOI: http://dx.doi.org/10.1109/82.686693]
  25. A. Demosthenous and J. Taylor, IEEE Transactions On Circuits And Systems-11: Analog And Digital Signal Processing, 47, 1405 (2000). [DOI: http://dx.doi.org/10.1109/82.899633]
  26. D. G. Nairn and C. A. T. Salama, IEEE Journal of Solid-State Circuits, 25, 997 (1990). [DOI: http://dx.doi.org/10.1109/4.58292]
  27. R. Chavoshisani and O. Hashemipour, Microelectronics Journal, 42, 28 (2011). [DOI: http://dx.doi.org/10.1016/j.mejo.2010.09.007]
  28. A. Worapisher, J. B. Hughes, and C. Toumazou, IEEE Journal of Solid-State Circuits, 36, 687 (2011). [DOI: http://dx.doi.org/10.1109/4.913747]
  29. M. S. Bhat and H. S. Jamadagni, Proc. the IEEE International Conference on VLSI Design (Kolkata, India, 2005) p. 175. [DOI: http://dx.doi.org/10.1109/ICVD.2005.139]
  30. H. O. Elwan and A. M. Soliman, IEEE Transactions on Circuits and Systems-1: Fundamental Theory and Applications, 44, 828 (1997). [DOI: http://dx.doi.org/10.1109/81.622987]
  31. M. Alioto, L. Pancioni, S. Rocchi, and V. Vignoli, IEEE Transactions on Circuits and Systems-1: Regulars Papers, 54, 1916 (2007). [DOI: http://dx.doi.org/10.1109/TCSI.2007.904685]
  32. Z. H. Kong, K. S. Yeo, and C. H. Chang, IEE Procedings-Circuits Devices Systems, 152, 151 (2005). [DOI: http://dx.doi.org/10.1049/ip-cds:20041137]
  33. N. Maeda, S. Komatsu, M. Morimoto, K. Tanaka, Y. Tsukamoto, K. Nii, and Y. Shimazaki, IEEE Journal of Solid-State Circuits, 48, 917 (2013). [DOI: http://dx.doi.org/10.1109/JSSC.2012.2237571]
  34. P. Kassanos, I. F. Triantis, and A. Demosthenous, IEEE Sensors Journal, 13, 2229 (2013). DOI: 10.1109/JSEN.2013.2251628
  35. W. L. Chun and F. L. Sheng, IEICE Electronics Express, 9, 1378 (2012). [DOI: http://dx.doi.org/10.1587/elex.9.1378]
  36. G. R. Chaji and A. Nathan, IEEE Transactions On Circuits And Systems-11: Analog And Digital Signal Processing, 55, 614 (2008). [DOI: http://dx.doi.org/10.1109/TCSII.2008.921586]
  37. G. M. Sung, C. P. Yu, and H. Y. Hsieh, IEEE Transactions on Power Electronics, 27, 916 (2012). [DOI: http://dx.doi.org/10.1109/TPEL.2010.2091284]
  38. R. Sridhar, N. Pandey, V. Bhatia, and A. Bhattacharyya, Proc. the 2012 IEEE 5th India International Conference on Power Electronics (IICPE) (Delhi, India, 2012) p.1-4. [DOI: http://dx.doi.org/10.1109/IICPE.2012.6450418]
  39. R. Choudhary, M. Bhardwaj, B. P. Singh, and K. Gupta, Proc. the IEEE Second International Conference on Advanced Computing & Communication Technologies (Rohtak, India, 2012) p.378-382. [DOI: http://dx.doi.org/10.1109/ACCT.2012.45]