Structural Engineering and Mechanics

  • 제60권6호
  • /
  • Pages.1021-1038
  • /
  • 2016
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Investigation of shear effects on the capacity and demand estimation of RC buildings

  • Palanci, Mehmet (Department of Civil Engineering, Istanbul Arel University) ;
  • Kalkan, Ali (Department of Civil Engineering, Pamukkale University) ;
  • Sene, Sevket Murat (Department of Civil Engineering, Pamukkale University)
  • 투고 : 2015.10.17
  • 심사 : 2016.10.06
  • 발행 : 2016.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

Considerable part of reinforced concrete building has suffered from destructive earthquakes in Turkey. This situation makes necessary to determine nonlinear behavior and seismic performance of existing RC buildings. Inelastic response of buildings to static and dynamic actions should be determined by considering both flexural plastic hinges and brittle shear hinges. However, shear capacities of members are generally neglected due to time saving issues and convergence problems and only flexural response of buildings are considered in performance assessment studies. On the other hand, recent earthquakes showed that the performance of older buildings is mostly controlled by shear capacities of members rather than flexure. Demand estimation is as important as capacity estimation for the reliable performance prediction in existing RC buildings. Demand estimation methods based on strength reduction factor (R), ductility (${\mu}$), and period (T) parameters ($R-{\mu}-T$) and damping dependent demand formulations are widely discussed and studied by various researchers. Adopted form of $R-{\mu}-T$ based demand estimation method presented in Eurocode 8 and Turkish Earthquake Code-2007 and damping based Capacity Spectrum Method presented in ATC-40 document are the typical examples of these two different approaches. In this study, eight different existing RC buildings, constructed before and after Turkish Earthquake Code-1998, are selected. Capacity curves of selected buildings are obtained with and without considering the brittle shear capacities of members. Seismic drift demands occurred in buildings are determined by using both $R-{\mu}-T$ and damping based estimation methods. Results have shown that not only capacity estimation methods but also demand estimation approaches affect the performance of buildings notably. It is concluded that including or excluding the shear capacity of members in nonlinear modeling of existing buildings significantly affects the strength and deformation capacities and hence the performance of buildings.

키워드

참고문헌

  1. Adalier, K. and Aydingun, O. (2001), "Structural engineering aspects of the June 27, 1998 Adana-Ceyhan (Turkey) earthquake", Eng. Struct., 23(4), 343-355. https://doi.org/10.1016/S0141-0296(00)00046-8
  2. Arslan, M.H. (2010), "An evaluation of effective design parameters on earthquake performance of RC buildings using neural networks", Eng. Struct., 32(7), 1888-1898. https://doi.org/10.1016/j.engstruct.2010.03.010
  3. ATC-40 (1996), Seismic evaluation and retrofit of concrete buildings, Applied Technology Council, Redwood City, CA.
  4. Ates, S., Kahya, V., Yurdakul, M. and Adanur, S. (2013), "Damages on reinforced concrete buildings due to consecutive earthquakes in Van", Soil Dyn. Earthq. Eng., 53, 109-118. https://doi.org/10.1016/j.soildyn.2013.06.006
  5. Bal, I.E., Crowley, H., Pinho, R. and Gulay F.G. (2008), "Detailed assessment of structural characteristics of Turkish RC building stock for loss assessment models", Soil Dyn. Earthq. Eng., 28(10-11), 914-932. https://doi.org/10.1016/j.soildyn.2007.10.005
  6. Chopra, A.K. and Goel, R.K. (2000), "Evaluation of NSP to estimate seismic deformation: SDF systems", J. Struct. Eng., 126(4), 482-490. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:4(482)
  7. Dogangun, A. (2004), "Performance of reinforced concrete buildings during the May 1, 2003 Bingol Earthquake in Turkey", Eng. Struct., 26(6), 841-856. https://doi.org/10.1016/j.engstruct.2004.02.005
  8. EN1998-1 (2004), Eurocode 8: Design of structures for earthquake resistance, Part 1: General rules, seismic actions and rules for buildings, European Committee for Standardization (CEN), Brussels.
  9. Fajfar, P. (2000), "A nonlinear analysis method for performance-based seismic design", Earthq. Spectra, 16(3), 573-592. https://doi.org/10.1193/1.1586128
  10. Freeman, S.A., Nicoletti, J.P. and Matsumura, G. (1984), "Seismic design guidelines for essential buildings", Proceedings of 8th World Conference on Earthquake Engineering, San Francisco, California, USA.
  11. Freeman, S.A., Nicoletti, J.P. and Tyrell, J.V. (1975), "Evaluations of existing buildings for seismic risk - A case study of Puget Sound Naval Shipyard, Bremerton, Washington", Proceedings of U.S. National Conference on Earthquake Engineering, Ann Arbor, Michigan, June.
  12. Ilki, A. and Celep, Z. (2012), "Earthquakes, existing buildings and seismic design codes in Turkey", Arabian J. Sci. Eng., 37(2), 365-380. https://doi.org/10.1007/s13369-012-0183-8
  13. Inel, M., Ozmen, H.B. and Bilgin, H. (2008), "Re-evaluation of building damage during recent earthquakes in Turkey", Eng. Struct., 30(2), 412-427. https://doi.org/10.1016/j.engstruct.2007.04.012
  14. Integrated Software for Structural Analysis and Design (2010), SAP2000, "Integrated finite element and design of structures analysis reference manual", Berkeley: Computers and Structures Inc., California, USA.
  15. Krawinkler, H. and Nassar, A.A. (1992), "Seismic based design on ductility and cumulative damage demands and capacities", Nonlinear Seismic Analysis and Design of Reinforced Concrete Buildings, Eds. H. Krawinkler, H. and Fajfar, P., Elsevier Applied Science, New York, USA.
  16. Miranda, E. (2001), "Estimation of inelastic deformation demands of SDOF systems", J. Struct. Eng., 127(9), 1005-1012. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:9(1005)
  17. Miranda, E. and Akkar, S. (2005), "Statistical evaluation of approximate methods for estimating maximum deformation demands on existing structures", J. Struct. Eng., 131(1), 160-172. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:1(160)
  18. Miranda, E. and Bertero, V.V. (1994), "Evaluation of strength reduction factors", Earthq. Spectra, 10(2), 357-379. https://doi.org/10.1193/1.1585778
  19. Newmark, N.M. and Hall, W.J. (1982), Earthquake spectra and design, Earthquake Engineering Research Institute, Berkeley, California.
  20. Palanci, M., Kalkan, A., Senel, S.M. and Yilmaz, Y. (2014), "Investigation of effect of different modeling techniques on existing buildings performance", Proceedings of 11th International Congress on Advances in Civil Engineering, Istanbul, Turkey, October.
  21. Park, R., Priestley, M.J.N. and Gill, W.D. (1982), "Ductility of square-confined concrete columns", J. Struct. Div., 108(ST4), 929-950.
  22. Priestley, M.J.N. (2003), Myths and Fallacies in Earthquake Engineering, (Revisited), The Mallet Milne Lecture, IUSS Press, Pavia, Italy.
  23. Priestley, M.J.N., Calvi, G.M. and Kowalsky, M.J. (2007), Displacement Based Seismic Design of Structures, IUSS Press, Pavia, Italy.
  24. Ruiz-Garcia, J. and Miranda, E. (2003), "Inelastic displacement ratios for evaluation of existing structures", Earthq. Eng. Struct. Dyn., 32, 1237-1258. https://doi.org/10.1002/eqe.271
  25. Senel, S.M., Palanci, M., Kalkan, A. and Yilmaz, Y. (2013), "Investigation of effects of modeling techniques on existing buildings seismic performance", Proceedings of 2nd Turkish Conference on Earthquake Engineering and Seismology, Hatay, Turkey, September. (in Turkish)
  26. Sezen, H., Whittaker, A.S., Elwood, K.J. and Mosalam, K.M. (2003), "Performance of reinforced concrete buildings during the August 17, Kocaeli, Turkey earthquake, and seismic design construction practice in Turkey", Eng. Struct., 25(1), 103-114. https://doi.org/10.1016/S0141-0296(02)00121-9
  27. Shibata, A. and Sozen, M. (1976), "Substitute structure method for seismic design in reinforced concrete", J. Struct. Eng., 102(1), 1-18.
  28. Turkish Earthquake Code (1998), TEC-1998, Specifications for buildings to be built in seismic areas, Ministry of Public Works and Settlement, Ankara, Turkey.
  29. Turkish Earthquake Code (2007), TEC-2007, Specifications for buildings to be built in seismic areas, Ministry of Public Works and Settlement, Ankara, Turkey.
  30. Turkish Standard 500, TS500, Requirements for design and construction of reinforced concrete structures, Turkish Standards Institute, Ankara, Turkey.
  31. Vidic, T., Fajfar, P. and Fischinger, M. (1994), "Consistent inelastic design spectra: strength and displacement", Earthq. Eng. Struct. Dyn., 23(5), 507-521. https://doi.org/10.1002/eqe.4290230504
  32. Zamfirescu, D. and Fajfar, P. (2001), "Comparison of simplified procedures for nonlinear seismic analysis of structures", Proceedings of the 3rd U.S. Japan Workshop on Performance-Based Earthquake Engineering Methodology for Reinforced Concrete Buildings, Seattle, Washington, August.

피인용 문헌

  1. A statistical assessment on global drift ratio demands of mid-rise RC buildings using code-compatible real ground motion records vol.16, pp.11, 2018, https://doi.org/10.1007/s10518-018-0384-y
  2. Seismic response of soil-structure interaction using the support vector regression vol.63, pp.1, 2016, https://doi.org/10.12989/sem.2017.63.1.115
  3. Effect of Soil-Structure Interaction on the Seismic Response of Existing Low and Mid-Rise RC Buildings vol.10, pp.23, 2020, https://doi.org/10.3390/app10238357