Structural Engineering and Mechanics

  • 제60권6호
  • /
  • Pages.1001-1019
  • /
  • 2016
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Behavior of steel and concrete composite beams with a newly puzzle shape of crestbond rib shear connector: an experimental study

  • Le, Van Phuoc Nhan (Department of Civil Engineering, Ho Chi Minh City University of Technology) ;
  • Bui, Duc Vinh (Department of Civil Engineering, Ho Chi Minh City University of Technology) ;
  • Chu, Thi Hai Vinh (Faculity of Civil Engineering, MienTrung University of Civil Engineering) ;
  • Kim, In-Tae (Department of Civil Engineering, Pusan National University) ;
  • Ahn, Jin-Hee (Department of Civil Engineering, Gyeongnam National University of Science and Technology) ;
  • Dao, Duy Kien (Department of Civil Engineering, Pusan National University)
  • 투고 : 2016.06.21
  • 심사 : 2016.10.05
  • 발행 : 2016.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

The connector is the most important part of a composite beam and promotes a composite action between a steel beam and concrete slab. This paper presents the experiment results for three large-scale beams with a newly puzzle shape of crestbond. The behavior of this connector in a composite beam was investigated, and the results were correlated with those obtained from push-out-test specimens. Four-point-bending load testing was carried out on steel-concrete composite beam models to consider the effects of the concrete strength, number of transverse rebars in the crestbond, and width of the concrete slab. Then, the deflection, ultimate load, and strains of the concrete, steel beam, and crestbond; the relative slip between the steel beam and the concrete slab at the end of the beams; and the failure mechanism were observed. The results showed that the general behavior of a steel-concrete composite beam using the newly puzzle shape of crestbond shear connectors was similar to that of a steel-concrete composite beam using conventional shear connectors. These newly puzzle shape of crestbond shear connectors can be used as shear connectors, and should be considered for application in composite bridges, which have a large number of steel beams.

키워드

과제정보

연구 과제 주관 기관 : National Research Foundation of Korea (NRF)

참고문헌

  1. Ahn, J.H., Lee, C.G., Won, J.H. and Kim, S.H. (2010), "Shear resistance of the perfobond rib shear connector depending on concrete strength and rib arrangement", J. Constr. Steel Res., 66(10), 1295-1307. https://doi.org/10.1016/j.jcsr.2010.04.008
  2. Bui. D.V. (2010), "Behaviour of Steel-Concrete Composite beams made of Ultra high performance concrete", Der Wirtschaftswissenschaftlichen Fakultater Universitat Leipzig, Leipzig, October.
  3. Chu, T.H.V., Bui, D.V., Le, V.P.N, Kim, I.T., Anh, J.H. and Dao, D.K. (2016), "Shear resistance behaviors of a newly puzzle shape of crestbond rib shear connector: an experimental study", Steel Compos. Struct., 21(5), 1157-1182 https://doi.org/10.12989/scs.2016.21.5.1157
  4. European Committee for Standardization (Hrsg.) (2004), Eurocode 4: Design of composite steel and concrete structures, September 2004, European Committee for Standardization. http://www.stb.rwth-aachen.de/projekte/2005/INTAB/downloadPreco.php
  5. Kim, S.H., Ahn, J.H., Choi, K.T. and Jung, C.Y. (2011), "Experimental evaluation of the shear resistance of corrugated perfobond rib shear connections". Adv. Struct. Eng., 14(2), 249-263. https://doi.org/10.1260/1369-4332.14.2.249
  6. Kim, S.H., Choi, J., Park, S.J., Ahn, J.H. and Jung, C.Y. (2014a), "Behavior of composite girder with Y-type perfobond rib shear connector", J. Constr. Steel Res., 103, 275-289. https://doi.org/10.1016/j.jcsr.2014.09.012
  7. Kim, S.H., Choi, K.T., Park, S.J., Park, S.M. and Jung, C.Y. (2013), "Experiment shear resistance evaluation of Y-type perfobond rib shear connector", J. Constr. Steel Res., 82, 1-18 https://doi.org/10.1016/j.jcsr.2012.12.001
  8. Kim, S.H., Heo, W.H., Woo, K.S., Jung, C.Y. and Park, S.J. (2014b), "End bearing resistance of Y-type perfobond rib according to rib width-height ratio", J. Constr. Steel Res., 103, 101-116. https://doi.org/10.1016/j.jcsr.2014.08.003
  9. Kim, S.H., Kim, K.S., Park, S.J., Ahn, J.H. and Lee, M.K. (2016), "Y-type perfobond rib shear connectors subjected to fatigue loading on highway bridges", J. Constr. Steel Res., 103, 445-454.
  10. Kim, S.H., Lee, C.G., Davaadorj, A., Yoon, J.H. and Won, J.H. (2010), "Experimental evaluation of joints consisting of parallel perfobond ribs in steel-PSC hybrid beams", Int. J. Steel Struct., 10(4), 373-384.
  11. Kim, S.H., Park, S.J., Heo, W.H. and Jung, C.Y. (2015), "Shear resistance characteristic and ductility of Y-type perfobond rib shear connector", Steel Compos. Struct., 18(2), 497-517. https://doi.org/10.12989/scs.2015.18.2.497
  12. Leonhardt, F., Andra, H.P., Harre, W. Neues. (1987), "Vorteilhaftes Verbundmittel fur Stahlvebund-Tragwerke mit hoher Dauerfestigkeit", Beton Stahlbetonbau, 82(12), 325-331. https://doi.org/10.1002/best.198700500
  13. Lorenc, W., Kozuch, M. and Rowinski, S. (2014), "The behaviour of puzzle-shaped composite dowels-Part I: Experimental study", J. Constr. Steel Res., 101, 482-499. https://doi.org/10.1016/j.jcsr.2014.05.013
  14. Lorenc, W., Kozuch, M. and Rowinski, S. (2014), "The behaviour of puzzle-shaped composite dowels - Part II: Theoretical investigations", J. Constr. Steel Res., 101, 500-518. https://doi.org/10.1016/j.jcsr.2014.05.012
  15. Lorenc, W., Kubica, E. and KoZUch, M. (2010), "Testing procedures in evaluation of resistance of innovative shear connection with composite dowels", Arch. Civil Mech. Eng., 10, 51-63. https://doi.org/10.1016/S1644-9665(12)60136-8
  16. Mohammad, M.A., Ayad, S.A. and Bilavari, K. (2011), "Performance evaluation of shear stud connectors in composite beams with steel plate and RCC slab". Int. J. Earth Sci. Eng., 4(6), 586-591
  17. PreCo-Beam (2009), Prefabricated enduring composite beams based on innovative shear transmission, Final Report, Research Fund for Coal and Steel, Contract No. RFSR-CT-2006-00030. 01/07/2006-30/06/2009.
  18. Preco+ (2016), Prefabricated Enduring Composite Beams based on innovative Shear Transmission; RFCS RFS2-CT-2011-00026, Research Fund for Coal and Steel (RFCS) of the European Community. EU. http://www.stb.rwth-aachen.de/projekte/2005/INTAB/downloadPreco.php
  19. Rovnak, M., Duricova, A. and Ivanco, V. (2000), "Non-traditional shear connections in steel-concrete composite structures", Proc. 6th ASCCS Conf. on Steel and Concrete Composite Structures, Los Angeles, 305-312.
  20. Shariati, M., Ramli, N.H., Arabnejad, M.M. Sulong, K.H. and Mahoutian, M. (2011), "Shear resistance of channel shear connectors in plain,reinforced and lightweight concrete", Sci. Res. Essay., 6(4), 977-983.
  21. Shim, C.S., Lee, P.G., Kim, D.W. and Chung, C.H. (2011), "Effects of Group Arrangement on the Ultimate Strength of Stud Shear Connection", Compos. Constr. Steel Concrete, 6, 92-101.
  22. Xue, D., Liu, Y., Yu, Z. and He, J. (2012), "Static behavior of multi-stud shear connectors for steel-concrete composite bridge", J. Constr. Steel Res., 74, 1-7. https://doi.org/10.1016/j.jcsr.2011.09.017

피인용 문헌

  1. Experimental Study on Mechanical Behavior of PBL Shear Connectors vol.23, pp.9, 2018, https://doi.org/10.1061/(ASCE)BE.1943-5592.0001274
  2. Vibration analysis of silica nanoparticles-reinforced concrete beams considering agglomeration effects vol.19, pp.3, 2016, https://doi.org/10.12989/cac.2017.19.3.333
  3. Numerical study for vibration response of concrete beams reinforced by nanoparticles vol.67, pp.3, 2018, https://doi.org/10.12989/sem.2018.67.3.311
  4. Experimental study on the hybrid shear connection using headed studs and steel plates vol.37, pp.6, 2020, https://doi.org/10.12989/scs.2020.37.6.649
  5. Application of a newly puzzle shaped crestbond rib shear connector in composite beam using inverted T steel girder: An experimental study vol.79, pp.1, 2021, https://doi.org/10.12989/sem.2021.79.1.117