Journal of the Institute of Electronics and Information Engineers (전자공학회논문지)

The Institute of Electronics and Information Engineers (대한전자공학회)
권호 표지
DOI QR코드

DOI QR Code

Real-Time System Parallel Testing Techniques for Weapon System Error Verification

무기체계 오류 검증을 위한 실시간 시스템 병렬시험 기법

  • Kim, Dong-Jun (Hanwha Systems, Electronics Engineering, Kyungpook National University)
  • 김동준 (한화시스템, 경북대학교 전자공학과)
  • Received : 2016.08.23
  • Accepted : 2016.11.09
  • Published : 2016.11.25
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper present the real-time system parallel testing techniques for weapon systems error verification. Previously field testing equipment in the military field was using the sequential testing method to maintain. This method could not check the error verification of interference. For this reason, in this paper propose the real-time system parallel testing techniques using an embedded module instead of the sequential testing techniques which is used in the weapon system error verification. Using the embedded module mounted switching control card conduct the parallel testing and then send the result to the PC. This method is possible to increase the reliability in the weapon system error verification.

본 논문은 무기체계의 오류를 검증할 때 필요한 실시간 시스템 병렬시험 기법에 대해서 제안한다. 이전에 국방분야에서 사용되는 야전시험장비는 무기체계를 순차적으로 검증하는 방식을 사용하였다. 오류를 순차적으로 검증하는 방식은 내부유닛간의 상호 간섭에 의한 부분의 오류검증은 할 수 없었다. 이러한 이유로 인해 본 논문에는 기존에 무기체계 오류 검증 시 사용되는 순차적 시험기법이 아닌 임베디드 장치를 이용한 실시간 시스템 병렬시험 기법을 제안한다. 임베디드 모듈이 탑재된 스위칭 제어카드는 병렬시험을 수행하고 그 결과를 사용자의 제어장치로 전달한다. 이러한 방식은 기존의 방식에 비해 좀 더 정확하게 무기체계 내부의 상호 간섭에 대한 오류 검증을 할 수 있다.

Keywords

References

  1. Sang-myung Lee and Young-kil Kim, "The study of PCB Tester for improving productivity," Korea Institute of information and Communication Engineering, Vol. 15, no. 6, pp. 598-603, June 2009.
  2. Z. Deming and L. Bin and R. Lian, "The Domain specific Software Architecture of Avionics Testing System," IEEE Digital Avionics System, October 2000.
  3. Dong-hoon Cho and Dong-hoon Lee and Sung-ho Lee, "The Study on Built-In Test for ATE S/W Verification in Production Phase," The Institute of Electronics and Information Engineers, Vol. 37, no. 1, pp. 1132-1135, June 2014.
  4. Youn-Ho Lee and Kwang-Kyun Jung and Tae-Dong Yoon and Ki-Sang Kwon, "Optimal Reliability Strategy for k-out-of-n System Considering Redundancy and Maintenance," Journal of the Korean Institute of Industrial Engineers, Vol. 40, no. 1, pp. 118-127, February 2014. https://doi.org/10.7232/JKIIE.2014.40.1.118
  5. Jae-geol Lim, "A Method to Design a Diagnostic System Using petri Nets," Korea Information Processing Society, Vol. 4, no. 2, pp. 526-530, October 1997.
  6. Hyung-Jin Joo, "Static Analysis based Software Supply Chain Assurance Technique," The Graduate School of Korea University degree of Master of Science, December 2015.
  7. Seong Woo Kwak, "Fault Recovery and Optimal Checkpointing Strategy for Dual Modular Redundancy Real-time Systems," The Institute of Electronics and Information Engineers, Vol. 44, no. 7, pp. 112-121, July 2007.
  8. Chang-Jin Kim and Gwang-Baek Oh and Young-Hwan Jung, "A Study on the Parallel Processing of the Object Generator in a Surface Combat System LBTS," The Institute of Electronics and Information Engineers, Vol. 13, no. 5, pp. 734-738, October 2010.
  9. Ju-Wan Ryu, "Design Of Ethernet Protocol Gateway for Parallel Interface," The Graduate School of Kyungpook National University degree of Master of Science, December 2007.
  10. Philip A. Laplante and Seppo J. Ovaska, "Real-Time Systems Design and Analysis," WILEY, pp. 266-312, April 2012.
  11. Wan Ok Heo and Eun Shim Park and Jung Hwan Yoon, "Improvements in Design and Evaluation of Built-In-Test System," The Korea Institute of Military Science and Technology, Vol. 15, no.2, pp. 111-120, April 2012. https://doi.org/10.9766/KIMST.2012.15.2.111