References
- Yoon, H. S., Chae, H. J., Lee, J. H. and Cho, N. K., "Development of Hydrazine Thruster Latching Valve," Proceedings of the Korean Society of Propulsion Engineers, pp. 363-367, 2005.
- Kim. K. N., Noh, Y. J. and Kim, D. H., "Optimization of Base Plates and Contact Switches in Trunk Latches," Trans. of KSAE, Vol. 22, No. 3, pp. 97-104, 2014. https://doi.org/10.7467/KSAE.2014.22.3.097
- Shong, K. M. and Roh, Y. S., "A Study on Discrimination between Short-Circuit and Overload based on the Characteristics of the Fusing Current of an Electrical Wire," J. KIEE, Vol. 21, No. 10, pp. 176-180, 2007.
- Lee, S. J., Lee, J. H., Lee, D. Y., Seo, T. W. and Kim, J. H., "Optimal Parametric Design of Coil Gun to Improve Muzzle Velocity," J. KSMTE, Vol. 23, No. 4, pp. 408-412, 2014.
- Kang, D. M., Kwak J. S., Choi J. W. and Park, K. D., "Optimization for Friction Welding of AZ31 Mg Alloy by Design of Experiments," J. KSMPE, Vol. 10, No. 4, pp. 64-69, 2011.
- Ha, H. G., Oh, S. J. and Yee, K. J., "Feasibility Study of Hierarchical Kriging Model in the Design Optimization Process," J. of KSAS, Vol. 42, No. 2, pp. 108-118, 2014.
- Kim, J. G. and Lee K. H., "A Structural Design of Microgyroscope Using Kriging Approximation Model," J. KSMPE, Vol.7, No. 4, pp. 149-154, 2008.
- Lim, S. H., Choi, N. S., Kim, N. K. and Kim, D. H., "Optimization of BLDC Motor to Minimize Cogging Torque Using Response Surface Method and Evolutionary Algorithm," Proceedins of KIEE Conference, pp. 213-215, 2010.
Cited by
- Design of 100W Regenerative Vehicle Suspension to Harvest Energy from Road Surfaces vol.19, pp.7, 2018, https://doi.org/10.1007/s12541-018-0129-5
- 전자기 리니어 액츄에이터의 집중매개변수 모델링 및 해석 vol.15, pp.5, 2016, https://doi.org/10.14775/ksmpe.2016.15.5.018
- Sensitivity Analysis and Optimum Design of Energy Harvesting Suspension System according to Vehicle Driving Conditions vol.36, pp.12, 2019, https://doi.org/10.7736/kspe.2019.36.12.1173