DOI QR코드

DOI QR Code

Effect of Tree Age and Active Alkali on Kraft Pulping of White Jabon

  • Wistara, Nyoman J. (Department of Forest Products, Faculty of Forestry, Bogor Agricultural University (IPB)) ;
  • Carolina, Anne (Department of Forest Products, Faculty of Forestry, Bogor Agricultural University (IPB)) ;
  • Pulungan, Widya S. (Department of Forest Products, Faculty of Forestry, Bogor Agricultural University (IPB)) ;
  • Emil, Nadrah (Department of Forest Products, Faculty of Forestry, Bogor Agricultural University (IPB)) ;
  • Lee, Seung-Hwan (College of Forest & Environmental Sciences, Kangwon National University) ;
  • Kim, Nam-Hun (College of Forest & Environmental Sciences, Kangwon National University)
  • 투고 : 2015.06.09
  • 심사 : 2015.07.03
  • 발행 : 2015.09.25

초록

White Jabon (Anthocephalus cadamba Miq.) is one of the fast growing species in Indonesia and has the potential as the raw material for pulp and paper. In this research, 3, 5, and 7 years old White Jabon woods were pulped under different active alkali charge of 15%, 18%, 21%, 24%, and 27%, and its effect on delignification degree, kappa number, pulp yield, pulp viscosity, brightness, unbeaten freeness, and delignification selectivity was investigated. The results showed that tree age and active alkali concentration influenced the quality of pulp and pulping properties, except for that of unbeaten freeness. Delignification degree increased with increasing active alkali charge, and this brought about the decrease of pulp kappa number. The pulping yield tended to decrease below the Klason lignin of approximately 4%. Even though the 3 years old wood resulted in the highest brightness and highest delignification selectivity, the highest pulp viscosity was obtained with the 5 years old wood. The dominant fiber length of all wood ages was in the range of 1.2 - 2.0 mm. The 3 years old wood was considered to be the most promising raw material for kraft pulping in the view point of pulping properties, pulp quality and harvesting rotation.

키워드

참고문헌

  1. Abrantes, S., Amaral, M.E., Costa, A.P., Duarte, A.P. 2007. Cynara cardunculus L. alkaline pulps: Alternatives fibres for paper and paperboard production. Bioresource Technology 98: 2873-2878. https://doi.org/10.1016/j.biortech.2006.09.052
  2. Area, M.C., Carvalho, M.G., Ferreira, P.J., Felissia, F.E., Barboza, O.M., Bengoechea, D.I. 2010. The influence of pulping and washing conditions on the properties of Eucalyptus grandis unbleached kraft pulps treated with chelants. Bioresource Technology 101: 1877-1884. https://doi.org/10.1016/j.biortech.2009.10.004
  3. Banavath, H.N., Bhardewaj, N.K., Ray, A.K. 2011. A comparative study of the effect of refining on charge of various pulps. Bioresource Technology 102: 4544-4551. https://doi.org/10.1016/j.biortech.2010.12.109
  4. Baptista, C., Robert, D., Duarte, A.P. 2008. Relationship between lignin structure and delignification degree in Pinus pinaster kraft pulps. Bioresource Technology 99: 2349-2356. https://doi.org/10.1016/j.biortech.2007.05.012
  5. Browning, B.L. 1967. Methods of Wood Chemistry. Interscience Publication, New York, USA.
  6. Camarero, S., Garcia, O., Vidal, T., Colom, J., del Rio, J.C., Gutierrez, A., Gras, J.M., Monje, R., Martinez, M.J., Martinez, A.T. 2004. Efficient bleaching of non-wood high-quality paper pulp using laccase-mediator system. Enzyme and Microbial Technology 35: 113-120. https://doi.org/10.1016/j.enzmictec.2003.10.019
  7. Copur, Y., Tozluoglu, A. 2008. A comparison of kraft, PS, kraft-AQ and kraft-$NaBH_4$ pulps of Brutia pine. Bioresoure Technology 99: 909-913. https://doi.org/10.1016/j.biortech.2007.04.015
  8. Costa, M.M., Colodette, J.L. 2007. The impact of kappa number composition on eucalyptus kraft pulp bleachability. Brazilian Journal of Chemical Engineering 24(1): 61-71. https://doi.org/10.1590/S0104-66322007000100006
  9. Dang, V.Q., Nguyen, K.L. 2007. A systematic approach for determination of optimal conditions for Lo-SolidsTM kraft pulping of Eucalyptus nitens. Chemical Engineering Journal 133: 97-103. https://doi.org/10.1016/j.cej.2007.02.012
  10. Department of Forestry. 2006. The Long Term Development Planning of Forestry 2006-2025. Department of Forestry. Jakarta. Indonesia.
  11. Feng, Z., Alen, R. 2001a. Soda-AQ pulping of wheat straw. Appita Journal 54(2): 217-220.
  12. Feng, Z., Alen, R. 2001b. Soda-AQ pulping of reed canary grass. Industrial Crops and Products. 14(1): 31-39. https://doi.org/10.1016/S0926-6690(00)00086-8
  13. Gellerstedt, G., Majtnerova, A., Zhang, L. 2004. Towards a new concept of lignin condensation in kraft pulping: Initial results. Comptes Rendus Biologies 327: 817-826. https://doi.org/10.1016/j.crvi.2004.03.011
  14. Gullichsen, J., Fogelholm, C. 1999. Chemical Pulping. FAPET OY, Helsinki, Finland.
  15. Gullichsen, J., Paulapuro, H. 2000. Forest Products Chemistry. FAPET OY, Helsinki, Finland.
  16. Hubbell, C.A., Ragauskas, A.J. 2010. Effect of acid-chlorite delignification on cellulose degree of polymerization. Bioresource Technology 101: 7410-7415. https://doi.org/10.1016/j.biortech.2010.04.029
  17. Johns, R.J., Wong, W.C., Ilic, J., Hoffman, M.H.A. 1993. Plant Resources of South-East Asia. Pudoc Scientific Publishers, Wageningen, Netherlands.
  18. Khiari, R., Mhenni, M.F., Belgacem, M.N., Mauret, E. 2010.Chemical composition and pulping of date palm rachis and Posidonia oceanic - A comparison with other wood and non-wood fibre sources. Bioresource Technology 101: 775-780. https://doi.org/10.1016/j.biortech.2009.08.079
  19. Kim, J.H., Jang, J.H., Ryu, J.Y., Hwang, W.J., Febrianto, F., Kim, N.H. 2013. Comparison of anatomical characteristics of White Jabon and Red Jabon grown in Indonesia. Journal of The Korean Wood Science and Technology 41(4): 327-336. https://doi.org/10.5658/WOOD.2013.41.4.327
  20. Krisnawati, H., Kallio, M., Kanninen, M. 2011. Anthocephalus cadamba Miq: Ecology, Silviculture and Productivity. CIFOR, Bogor, Indonesia.
  21. Kubes, G.J., Macleod, J.M., Fleming, B.I., Bolker, H.I. 1981. The viscosities of unbleached alkaline Pulps. Journal of Wood Chemistry and Technology 1(1): 1-10. https://doi.org/10.1080/02773818108085090
  22. MacLeod, M. 2007. The top ten factors in kraft pulp yield. Paperi ja Puu-Paper and Timber 89(4): 1-7.
  23. Metso Automation-$FiberLab^{TM}$. 2001. Research-quality fiber measurement for mill process management. Leaflet.
  24. Nguyen, K.L., Dang, V.Q. 2006. The fractal nature of kraft pulping kinetics applied to thin Eucalyptus nitens chips. Carbohydrate Polymers 64: 104-111. https://doi.org/10.1016/j.carbpol.2005.10.036
  25. Sharma, M., Shukla, R.N. 2013. Impact of cooking conditions on pulp viscosity and kappa number of Leucaena leucocephala wood for kraft pulping. International Journal of Engineering Research and Technology 2(1): 1-8.
  26. Smook, G.A. 1992. Handbook for Pulp & Paper Technologists (3rd Edition). Angus Wilde Publications Inc, Vancouver, Canada.
  27. Tran, A.V. 2006. Chemical analysis and pulping study of pineapple crown leaves. Industrial Crops and Products 24(1): 66-74. https://doi.org/10.1016/j.indcrop.2006.03.003
  28. Vu, T.H.M., Pakkanen, H., Alen, R. 2004. Delignification of bamboo (Bambusa procera acher): Part 1. Kraft pulping and the subsequent oxygendelignification to pulp with a low kappa number. Industrial Crops and Products 19(1): 49-57. https://doi.org/10.1016/j.indcrop.2003.07.001

피인용 문헌

  1. The Effect of Lignin Content and Freeness of Pulp on the Bioethanol Productivity of Jabon Wood vol.7, pp.5, 2016, https://doi.org/10.1007/s12649-016-9510-8
  2. Microwave Assisted-Acid Hydrolysis of Jabon Kraft Pulp 2019, https://doi.org/10.1007/s12649-017-0182-9