Journal of the Architectural Institute of Korea Planning & Design (대한건축학회논문집:계획계)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

Comparative Analysis of Window Thermal Performance Calculation Method between Window Certification Systems

국내외 창호 인증제도에서의 창호 열성능 평가 방법 비교 분석

  • Koo, So Young (Department of Architectural Engineering, Ewha Womans University)
  • Received : 2014.08.13
  • Accepted : 2015.09.17
  • Published : 2015.09.30
⟨ Previous Next ⟩

Abstract

The purpose of this study was to analyze the differences of window thermal performance calculation method between window certification systems. The U-value and g-value calculation method in ISO 15099 was reviewed and analyzed. The window certification systems in different countries were compared. The results show that there are differences in the standard window size, calculation algorithm, rating indicators, boundary conditions and rating scale. A simulation was performed to evaluate the thermal performance of windows using different calculation methods.

Keywords

Acknowledgement

Supported by : 국토교통부, 지식경제부

References

  1. Jang, H. I., Choi, W. K., Choi, G. S., Eom, J. Y., Lee, H. S., & Suh, S. J., (2014). A study on the influence of the U-value according to the window size and performance. Journal of Korean institute of architectural sustainable environment and building systems, 8(1), 14-20.
  2. Kim, T. J., Kang, J. S., Choi, K. S., & Choi, H. J. (2013). An analysis on the research trends for establishing solar heat gain coefficient measurement method of window, Korean institute of architectural sustainable environment and building systems. 2013 Fall conference proceeding, 245-248.
  3. Kim, J. S., Kim, Y., Choi, H. J., Choi, G. S., & Kang, J. S. (2014). A study on the window-set simulation management scheme-The effect of spacer on the U-value of window-set, The society of air-conditioning and refrigerating engineers of Korea. 2014 Summer conference proceeding, 638-639.
  4. PHI. (2012). Certification criteria for certified passive house glazings and transparent components, ver.2.0E.
  5. DIN. (2011). DIN EN 410 Glass in building - Determination of luminous and solar characteristics of glazing.
  6. DIN. (2011). DIN EN 673 Glass in building - Determination of thermal transmittance (U value) - Calculation method.
  7. Ministry of land, infrastructure and transport. (2013). Energy efficient design guides for buildings, Notification No. 2013-141.
  8. ISO. (2013). ISO 15099 Thermal performance of windows, doors and shading devices - Detailed calculations.
  9. ISO. (2003). ISO 10077-2 Thermal performance of windows, doors and shutters - Calculation of thermal transmittance Part 2: Numerical method for frames.
  10. ISO. (2007). ISO 10211 Thermal bridges in building construction - Heat flows and surface temperature - Detailed calculations.
  11. NFRC. (2004). NFRC 100 Procedure for Determining Fenestration Product U-Factors.
  12. NFRC. (2010). NFRC 200, Procedure for Determining Fenestration Product Solar Heat Gain Coefficient and Visible Transmittance at Normal Incidence.
  13. Ministry of trade, industry & energy. (2015). Regulation on energy efficiency labeling and standards, Notification No. 2015-37.