Journal of the Korean Society for Marine Environment & Energy (한국해양환경ㆍ에너지학회지)

The Korean Society for Marine Environment and Energy (한국해양환경•에너지학회)
권호 표지
DOI QR코드

DOI QR Code

Development of FRP Recycling Process for Regenerating Applications of Fire Resistance Performance of High Strength Concrete

고강도 콘크리트의 내화성능 용도에 따른 FRP재활용 공정 개발

  • Lee, Seung Hee (Department Bio. & Chemical Engineering, Hong-Ik University) ;
  • Park, Jong Won (Department Architectural Engineering, Hong-Ik University) ;
  • Yoon, Koo Young (Department Mechano-Informatics Engineering, Hong-Ik University)
  • 이승희 (홍익대학교 과학기술대학 바이오화학공학과) ;
  • 박종원 (홍익대학교 과학기술대학 건축공학과) ;
  • 윤구영 (홍익대학교 과학기술대학 기계정보공학과)
  • Received : 2015.07.07
  • Accepted : 2015.07.28
  • Published : 2015.08.25
Download PDF
⟨ Previous Next ⟩

Abstract

In the last decade, increasing national research fund for recycling the waste FRP (fiber reinforced plastics) ships which has caused environmental problems, improves the technology making concrete-reinforcing fibers out of the waste FRP. Furthermore, the concrete with recycled FRP fiber was tested for the structural performance. Experimental strength tests show that use of recycled FRP powder does not reduce the compressive strength of high strength concrete, and does increase the fire resistance performance of high strength concrete significantly. But, the study in investigating the properties of recycled fiber powder from waste FRP has not been completed because of the absence of the method of separation of mat layer from the waste FRP. This study is to propose a new extracting method of the mat layer from waste FRP, which is the efficient and environment friendly system. and thus it is considered to be the useful recycling method for fire resistance high concrete products or structures.

환경문제를 야기시켰던 해상용 FRP재활용에 대해 지난 10여 년간 다양한 국가적 지원이 이루어져서 폐FRP로부터 콘크리트 강화용 섬유 제작이 진행되어 왔다. 이렇게 제작된 강화 콘크리트에 대해 구조적 능력까지 시험한 바 있다. 시험 테스트 결과 재활용 FRP 가루를 사용한 콘크리트는 고강도 콘크리트의 압축강도를 감소시키지 않았을 뿐 만 아니라, 고강도 콘크리트의 내폭 특성을 상당히 증대시켰다. 그러나 폐FRP로부터 매트층의 분리 방법이 안정화되지 않았기 때문에 폐FRP 섬유 가루의 특성에 대한 연구는 종결되지 않았다. 본 연구는 폐FRP로부터 매트층을 분리하는 효과적이며 친환경적인 새로운 방법에 관한 것이며, 이것은 내폭성이 강한 제품이나 구조물에 적합한 FRP섬유가루 생산 공정에 유용한 재활용 공정이라 생각한다.

Keywords

References

  1. Kim, Y.S., Shim, S.M., Yoon, K.Y. and Kim, S.D., 2004, "Develoipment of technology for environmentally friendly scrapped FRP ship treatment", Technology for Waste Material Recycling from KIEST.
  2. Kim, Y.S., Lee, S.H. and Yoon, K.Y., 2007, "A recycling technology for waste FRP by development of FRC and its products", Technology for Waste Material Recycling, Eco-Technopia 21 Project from KIEST.
  3. Baek, J.H., Kim, Y.S., Yoon, K.Y., Lee, S.H. and Park, J.W., 2010, "Seismic performance of reinforced concrete beam-tocolumn joints strengthened with recycled fibres from fiber-reinforced plastics", Korean, 2010, "A recycling technologyhigh of strength concrete reinforced for with recycled fibres from fiberreinforced plastics", Technology for Waste Material Recycling, Eco-Technopia 21 Project from KIEST.
  4. Park, J. and Baek, J., 2009, "Mechanical properties of high strength concrete reinforced with recycled fibres from fiber-reinforced plastics", Journal of the Architectural Institute of Korea Structure & Construction, Vol. 25, No. 8, pp. 127-134.
  5. Park, J.W. and Paek J.H., 2010, "Structural performance of reinforced concrete members strengthened with recycled fibres from fiber-reinforced plastics", Journal of the Architectural Institute of Korea Structure & Construction, Vol. 26, No. 7, pp. 37-44.
  6. Park, J.W. and Peek, J.H., 2011, "Seismic Performance of Reinforced Concrete Beam-to-Column Joints Strengthened with Recycled Fibres from Fiber-Reinforced Plastics", Korean Society of Disaster & Security, Vol. 11, No. 6, pp. 25-30.
  7. Shun, D.W., Ghim, Y.S., Bae, D.H., Cho, S.H. and Son, J.E., 1995, "Bench - scale fluidized - bed plastic waste pyrolysis", Korea Society of Waste Management, Vol. 12, No. 1, pp 120.
  8. Yoo, S.H., 2009, "Spalling reduction method of high strength reinforced concrete columns using fibers", Journal of Korean Insitute of Fire Sci. & Eng., Vol. 23, No. 4, pp. 1-6.
  9. Lee, S.H., Lee, J.K. and Kim, Y.J., 2012, "A study on the chemical pre-treatments suitable for the layer differentiation of FRP waste", Journal of the Korean Society for Marine Environment and Energy, Vol. 15, No. 1, pp. 47-53. https://doi.org/10.7846/JKOSMEE.2012.15.1.047
  10. Han, C.G., Yang, S.H., Lee, B.Y. and Hwang, Y.S., 1999, "A study on the spalling properties of high-performance concrete with the kinds of aggregate and polypropylene fiber contents", Journal of the Korea Concrete Institute, Vol. 11, No. 5, pp. 69-78. https://doi.org/10.22636/JKCI.1999.11.5.69
  11. NISTIR 5934, 1996, "Fire performance of high-strength concrete : a report of the state-of-the-art", NIST, Dec.
  12. Song, H., Hyung, W. K., Do, J.Y. and So, Y.S., 2004, "Explosive spalling dependent on compressive strength concrete including silica fume", Journal of Architectural Institute of Korea. Sep. Vol. 20, No. 9, pp. 111-117.
  13. Pierre Kalifa, 2001, "High-temperature behaviour of HPC with polypropylene fibers from spalling to microstructures", Cement and Concrete Research, Jun. pp. 1487-1499.
  14. Yoon, K.Y., Kim, Y.S. and Lee, S.H., 2007, "Recycle of the glass fiber obtained from the roving cloth of FRP I: study for the physical properties of fiber-reinforced mortar", Journal of the Korean Society for Marine Environment and Energy, Vol. 10, No. 2, pp. 102-106.
  15. Lee, S.H. and Yoon, K.Y., 2013, "Developing advanced total recycling method of FRP boats", Journal of the Korean Society for Marine Environment and Energy, Vol. 16, No. 1, pp. 53-59. https://doi.org/10.7846/JKOSMEE.2013.16.1.53
  16. Lee, S.H., Park, J.W. and Yoon, K.Y., 2014, "Compressive strength and fire resistance performance of high strength concrete with recycled fiber powder from fiber-reinforced plastics", Journal of the Korean Society for Marine Environment and Energy, Vol. 17, No. 1, pp. 46-51. https://doi.org/10.7846/JKOSMEE.2014.17.1.46
  17. Yoon, K.Y., Kim, Y.S. and Paek, J.H., 2009, "The extracting system for waste FRP roving layer", Korea Patent No. 10-2009-0008129.