DOI QR코드

DOI QR Code

Implementation of bond-slip effects on behaviour of slabs in structures

  • Mousavi, S.S. (Faculty of Civil Engineering, Babol Noshirvani University of Technology) ;
  • Dehestani, M. (Faculty of Civil Engineering, Babol Noshirvani University of Technology)
  • Received : 2015.01.01
  • Accepted : 2015.07.25
  • Published : 2015.08.25

Abstract

Employing discrete elements for considering bond-slip effects in reinforced concrete structures is very time consuming. In this study, a new modified embedded element method is used to consider the bond-slip phenomenon in structural behavior of reinforced concrete structures. A comprehensive parametric study of RC slabs is performed to determine influence of different variables on structural behavior. The parametric study includes a set of simple models accompanied with complex models such as multi-storey buildings. The procedure includes the decrease in the effective stiffness of steel bar in the layered model. Validation of the proposed model with existing experimental results demonstrates that the model is capable of considering the bond-slip effects in embedded elements. Results demonstrate the significant effect of bond-slip on total behavior of structural members. Concrete characteristic strengths, steel yield stress, bar diameter, concrete coverage and reinforcement ratios are the parameters considered in the parametric study. Results revealed that the overall behavior of slab is significantly affected by bar diameter compared with other parameters. Variation of steel yield stress has insignificant impact in static response of RC slabs; however, its effect in cyclic behavior is important.

Keywords

References

  1. Arslan, M.E. and Durmus, A. (2014), "Fuzzy logic approach for estimating bond behavior of lightweight concrete", Comput. Concrete., 14(3), 233-245 https://doi.org/10.12989/cac.2014.14.3.233
  2. Bailey, C.G. (2001), "Membrane action of unrestrained lightly reinforced concrete slabs at large displacements", Eng. Struct., 23(5), 470-483. https://doi.org/10.1016/S0141-0296(00)00064-X
  3. Bailey, C.G. and Moore, D.B. (2000), "The structural behavior of steel frames with composite floor slabs subject to fire", Struct. Eng., 78(11), 19-27.
  4. Belarbi, A. and Hsu, T.T. (1994), "Constitutive laws of concrete in tension and reinforcing bars stiffened by concrete", ACI. Struct. J., 91(4), 465-474.
  5. Borosnyoi, A. and Balazs, G.L. (2005), "Models for flexural cracking in concrete: the state of the art", Struct. Concrete., 6(2), 53-62. https://doi.org/10.1680/stco.2005.6.2.53
  6. Cashell, K.A., Elghazouli, A.Y. and Izzuddin, B.A. (2010a), "Experimental and analytical assessment of ductility in lightly reinforced concrete members", Eng. Struct., 32(9), 2729-2743. https://doi.org/10.1016/j.engstruct.2010.04.043
  7. Cashell, K.A., Elghazouli, A.Y. and Izzuddin, B.A. (2010b), "Ultimate behavior of idealized composite floor elements at ambient and elevated temperature", Fire. Technol., 46(1), 67-89. https://doi.org/10.1007/s10694-009-0089-5
  8. Cashell, K.A., Elghazouli, A.Y. and Izzuddin, B.A. (2011), "Failure assessment of lightly reinforced floor slabs. I: Experimental investigation", J. Struct. Eng. - ASCE., 137(9), 977-988. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000420
  9. Chang, X., Chen, Y.J., Lin, H.X. and Zhang, Y.B. (2012), "Modeling of fiber pullout behaviors of stiff fiber reinforced cementitious composites", Comput. Concrete., 9(3), 171-178. https://doi.org/10.12989/cac.2012.9.3.171
  10. Comite euro-international du beton (1993), CEB-FIP Model Code 1990: Design Code (No. 213-214). FIB-Fed. Int. du Beton.
  11. Dehestani, M. and Mousavi, S.S. (2015), "Modified steel bar model incorporating bond-slip effects for embedded element method", Constr. Build. Mater., 81, 284-290. https://doi.org/10.1016/j.conbuildmat.2015.02.027
  12. Dominguez, N., Fernandez, M.A. and Ibrahimbegovic, A. (2010), "Enhanced solid element for modelling of reinforced concrete structures with bond-slip", Comput. Concrete., 7(4), 347-364. https://doi.org/10.12989/cac.2010.7.4.347
  13. Elghazouli, A.Y. and Izzuddin, B.A. (2004), "Failure of lightly reinforced concrete members under fire. II: Parametric studies and design considerations", J. Struct. Eng. - ASCE., 130(1), 18-31. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:1(18)
  14. Eurocode 2 (1991), Design of Concrete Structures: Part 1: General Rules and Rules for Buildings, European Committee for Standardization.
  15. Gilbert, R.I. (2005), "Strain localization and ductility of reinforced concrete slabs", Proceedings of the Australian Structural Engineering Conference 2005, Engineers Australia.
  16. Gilbert, R.I. and Sakka, Z.I. (2007), "Effect of reinforcement type on the ductility of suspended reinforced concrete slabs", J. Struct. Eng. - ASCE., 133(6), 834-843. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:6(834)
  17. Golafshani, E.M., Rahai, A. and Kebria, S.S.H. (2014), "Prediction of the bond strength of ribbed steel bars in concrete based on genetic programming", Comput. Concrete., 14(3), 327-359. https://doi.org/10.12989/cac.2014.14.3.327
  18. Hibbitt, D., Karlsson, B. and Sorensen, P. (2004), ABAQUS Analysis User's Manual, Pawtucket, USA.
  19. Ingerslev, A. (1923), "The strength of rectangular slabs", J. Ins. Civil. Eng., 1(1), 3-14.
  20. Johansen, K.W. (1962), Yield-Line Theory, Cement and Concrete Association, London.
  21. Park, R., Kent, D.C. and Sampson, R.A. (1972), "Reinforced concrete members with cyclic loading", J. Struct. Div., 98(7), 1341-1360.
  22. Shayanfar, M.A. and Safiey, A. (2008), "A new approach for nonlinear finite element analysis of reinforced concrete structures with corroded reinforcements", Comput. Concrete., 5(2) 155-174.
  23. Tamai, S. (1988), "Average stress-strain relationship in post yield range of steel bar in concrete", Concrete. Lib. JSCE., 11, 117-129.
  24. Wood, R.H. (1961), Plastic and Elastic Design of Slabs and Plates: with Particular Reference to Reinforced Concrete Floor Slabs, Thames and Hudson.
  25. Wood, R.H. and Jones, L.L. (1967), Yield Line Analysis of Slabs, Chatto & Windus and Thames & Hudson, London.
  26. Wu, Y.F. and Zhao, X.M. (2012), "Unified bond stress-slip model for reinforced concrete", J. Struct. Eng. - ASCE., 139(11), 1951-1962.

Cited by

  1. Bond strength and development length of steel bar in unconfined self-consolidating concrete vol.131, 2017, https://doi.org/10.1016/j.engstruct.2016.10.029
  2. On discrete element method for rebar-concrete interaction vol.151, 2017, https://doi.org/10.1016/j.conbuildmat.2017.06.086
  3. Bond strength and development length of glass fiber-reinforced polymer bar in unconfined self-consolidating concrete vol.35, pp.11, 2016, https://doi.org/10.1177/0731684416632930
  4. 3-D finite element modelling of prestressed hollow-core slabs strengthened with near surface mounted CFRP strips vol.21, pp.6, 2018, https://doi.org/10.12989/cac.2018.21.6.607
  5. Partial sectional confinement in a quasi-encased steel-concrete composite beam vol.22, pp.3, 2018, https://doi.org/10.12989/cac.2018.22.3.269
  6. An Equivalent Method for Bar Slip Simulation in Reinforced Concrete Frames vol.18, pp.8, 2015, https://doi.org/10.1007/s40999-020-00507-6
  7. Prestressed lightweight concrete slabs strengthened with carbon-fibre-reinforced polymer vol.174, pp.2, 2021, https://doi.org/10.1680/jstbu.18.00220