참고문헌
- Abdel-Aal H A (2002) Thermal kinetics of protective oxide layer formation in the dry sliding of metallic tribo-specimens. Tribol. Int. 35, 757-769. https://doi.org/10.1016/S0301-679X(02)00031-2
- Agron A S (1979) Plastic deformation in metallic glasses. Acta Metall. 27, 47-58. https://doi.org/10.1016/0001-6160(79)90055-5
- Archard J F (1959) The temperature of rubbing surfaces. Wear 2, 438-455. https://doi.org/10.1016/0043-1648(59)90159-0
- Bao Y and Wierzbicki T (2005) On the cut-off value of negative triaxiality for fracture. Eng. Fract. Mech. 72, 1049-1069. https://doi.org/10.1016/j.engfracmech.2004.07.011
- Bao Y and Wierzbicki Y (2004) On fracture locus in the equivalent strain and stress triaxiality space. Int. J. Mech. Sci. 46, 81-98. https://doi.org/10.1016/j.ijmecsci.2004.02.006
- Boucharat N, Hebert R, Rosner H, Valiev R, and Wilde G (2005) Nanocrystallization of amorphous Al88Y7Fe5 alloy induced by plastic deformation. Scr. Mater. 53, 823-828. https://doi.org/10.1016/j.scriptamat.2005.06.004
- Chen H, He Y, Shiflet G J, and Poon S J (1994) Deformation-induced nanocrystal formation in shear bands of amorphous alloys. Nature 367, 541-543. https://doi.org/10.1038/367541a0
- Chovet C, Desrayaud Ch, and Montheillet F (2002) A mechanical analysis of the plane strain channel-die compression test: friction effects in hot metal testing. Int. J. Mech. Sci. 44, 343-357. https://doi.org/10.1016/S0020-7403(01)00092-3
- Christman T, Needleman A, and Suresh S (1989) An experimental and numerical study of deformation in metal-ceramic composites. Acta Metall. 37, 3029-3050. https://doi.org/10.1016/0001-6160(89)90339-8
- Conner R D, Johnson W L, Paton N E, and Nix W D (2003) Shear bands and cracking of metallic glass plates in bending. J. Appl. Phys. 94, 904-911. https://doi.org/10.1063/1.1582555
- Deng D, Argon A S, and Yip S (1989) Simulation of plastic deformation in a two-dimensional atomic glass by molecular dynamics IV. Phil. Trans. R. Soc. Lond. A 329, 613-640. https://doi.org/10.1098/rsta.1989.0092
- Donovan P E (1989) A yield criterion for Pd40Ni40P20 metallic glass. Acta Metall. 37, 445-456. https://doi.org/10.1016/0001-6160(89)90228-9
- Grebe H A, Pak H R, and Meyers M A (1985) Adiabatic shear localization in titanium and Ti-6 pct Al-4 pct V alloy. Matall. Trans. A 16, 761-775. https://doi.org/10.1007/BF02814827
- Greer A L (1995) Metallic glasses. Science 267, 1947-1953. https://doi.org/10.1126/science.267.5206.1947
- Harms U, Shen T D, and Schwarz R B (2002) Thermal conductivity of Pd40Ni40−xCuxP20 metallic glasses. Scr. Mater. 47, 411-414. https://doi.org/10.1016/S1359-6462(02)00160-4
- He D, Zhao Q, Wang W H, Che R Z, Liu J, Luo X J, and Wang W K (2002) Pressure-induced crystallization in a bulk amorphous Zr-based alloy. J. Non-Cryst. Solids 297, 84-90. https://doi.org/10.1016/S0022-3093(01)00906-1
- Jaeger J C (1942) Moving sources of heat and the temperature at sliding contacts. Proc. R. Soc. NSW. 76, 203-224.
- Jiang W H, Pinkerton F E, and Atzmon M (2003) Effect of strain rate on the formation of nanocrystallites in an Al-based amorphous alloy during nanoindentation. J. Appl. Phys. 93, 9287-9290. https://doi.org/10.1063/1.1571234
- Kim J -J, Choi Y, Suresh S, and Argon A S (2002) Nanocrystallization during nanoindentation of a bulk amorphous metal alloy at room temperature. Science 295, 654-657.
- Kramer M J, Sordelet D J, Bastarows A F, Tan X, and Biner S B (2005) Absence of crystallization during cylindrical indentation of a Zr-based metallic glass. J. Non-Cryst. Solids 351, 2159-2165. https://doi.org/10.1016/j.jnoncrysol.2005.06.014
- Lee B J, Lee C S, and Lee J C (2003) Stress induced crystallization of amorphous materials and mechanical properties of nanocrystalline materials: a molecular dynamics simulation study. Acta Mater. 51, 6233-6240. https://doi.org/10.1016/S1359-6454(03)00446-4
- Lee B J, Lee J C, Kim Y C, and Lee S H (2004) Behavior of amorphous materials under hydrostatic pressures: a molecular dynamics simulation study. Met. Mater. Int. 10, 467-474. https://doi.org/10.1007/BF03027350
- Lee J K, Bae D H, Yi S, Kim W T, and Kim D H (2004) Effects of Sn addition on the glass forming ability and crystallization behavior in Ni-Zr-Ti-Si alloys. J. Non-Cryst. Solids 333, 212-220. https://doi.org/10.1016/j.jnoncrysol.2003.10.011
- Lee M H, Bae D H, Kim D H, Kim W T, Sordelet D J, Kim K B, and Eckert J (2008) Nanocrystallization at shear bands in bulk metallic glass matrix composites. Scripta Mater. 58, 651-654. https://doi.org/10.1016/j.scriptamat.2007.11.032
- Lee M H, Kim B S, Kim D H, Ott R T, Sansoz F, and Eckert J (2014) Effect of geometrical constraint condition on the formation of nanoscale twins in the Ni-based metallic glass composite. Philos. Mag. Lett. 94, 351-360. https://doi.org/10.1080/09500839.2014.907509
- Lee M H, Lee J K, Kim K T, Thomas J, Das J, Kuhn U, and Eckert J (2009) Deformation-induced microstructural heterogeneity in monolithic Zr44Ti11Cu9.8Ni10.2Be25 bulk metallic glass, Phys. Status Solidi RRL 3, 46-48. https://doi.org/10.1002/pssr.200802242
- Lewandowski J J and Greer A L (2006) Temperature rise at shear bands in metallic glasses. Nat. Mater. 5, 15-18. https://doi.org/10.1038/nmat1536
- Lewandowski J J and Lowhaphandu P (2002) Effects of hydrostatic pressure on the flow and fracture of a bulk amorphous metal. Philos. Mag. A 82, 3427-3441. https://doi.org/10.1080/01418610208240453
- Liu C T, Heatherly L, Horton J A, Easton D S, Carmichael C A, Wright J L, Schneibel J L, Yoo M H, Chen C H, and Inoue A (1998) Test environments and mechanical properties of Zr-base bulk amorphous alloys. Metall. Mater. Trans. A 29, 1811-1820. https://doi.org/10.1007/s11661-998-0004-6
- Lund A C and Schuh C A (2003) Yield surface of a simulated metallic glass. Acta Mater. 51, 5399-5411. https://doi.org/10.1016/S1359-6454(03)00396-3
- Pauly S, Lee M H, Kim D H, Kim K B, Sordelet D J, and Eckert J (2009) Crack evolution in bulk metallic glasses. J. Appl. Phys. 106, 103518. https://doi.org/10.1063/1.3259418
- Pekarskaya E, Kim C P, and Johnson W L (2001) In situ transmission electron microscopy studies of shear bands in a bulk metallic glass based composite. J. Mater. Res. 16, 2513-2518. https://doi.org/10.1557/JMR.2001.0344
- Saida J, Setyawan A D H, Kato H, and Inoue A (2005) Nanoscale multistep shear band formation by deformation-induced nanocrystallization in Zr-Al-Ni-Pd bulk metallic glass. Appl. Phys. Lett. 87, 151907. https://doi.org/10.1063/1.2081124
- Spaepen F (1977) A microscopic mechanism for steady state inhomogeneous flow in metallic glasses. Acta Metall. 25, 407-415. https://doi.org/10.1016/0001-6160(77)90232-2
- Spaepen F (2006) Metallic glasses: Must shear bands be hot. Nat. Mater. 5, 7-8. https://doi.org/10.1038/nmat1552
- Steif P S (1983) Ductile versus brittle behavior of amorphous metals. J. Mech. Phys. Solids 31, 359-388. https://doi.org/10.1016/0022-5096(83)90005-4
- Teng X, Weirzbicki T, Hiermaier S, and Rohr I (2005) Numerical prediction of fracture in the Taylor test. Int. J. Solids Struct. 42, 2929-2948. https://doi.org/10.1016/j.ijsolstr.2004.09.039
- Vaidyanathan R, Dao M, Ravichandran G, and Suresh S (2001) Study of mechanical deformation in bulk metallic glass through instrumented indentation. Acta Mater. 49, 3781-3789. https://doi.org/10.1016/S1359-6454(01)00263-4
- Yang B, Morrison M L, Liaw P K, Buchanan R A, Wang G, Liu C T, and Denda M (2005) Dynamic evolution of nanoscale shear bands in a bulk-metallic glass. Appl. Phys. Lett. 86, 141904. https://doi.org/10.1063/1.1891302
- Ye F and Lu K (1999) Pressure effect on crystallization kinetics of an Al- La-Ni amorphous alloy. Acta Mater. 47, 2449-2454. https://doi.org/10.1016/S1359-6454(99)00104-4
- Zhang Z F, He G, Eckert J, and Schultz L (2003) Fracture mechanisms in bulk metallic glassy materials. Phys. Rev. Lett. 91, 045505. https://doi.org/10.1103/PhysRevLett.91.045505