DOI QR코드

DOI QR Code

Flexural strength of roller compacted concrete pavements reinforced with glass-roved textiles

  • Madhkhan, Morteza (Department of Civil Engineering, Isfahan University of Technology) ;
  • Nowroozi, Saeid (Department of Civil Engineering, Isfahan University of Technology) ;
  • Torki, Mohammad E. (Department of Aerospace Engineering, Texas A&M University)
  • 투고 : 2014.02.08
  • 심사 : 2015.06.01
  • 발행 : 2015.07.10

초록

The one-way (two-way) flexural strength of RCC prisms (circular slabs) reinforced with glass fiber textiles is addressed. To this end, alkaline-resistant glass fiber textiles with three surface weights were used in the composite, the matrix concrete was designed with zero/nonzero slump, and the textiles were used with/without an intermediate layer provided by epoxy resin and sand mortar. Prisms were tested under a four-point loading apparatus and circular slabs were placed on simple supports under a central load. Effects of the amount and geometry of reinforcement, matrix workability, and the intermediate layer on the ultimate load and deflection were investigated. Results revealed that, with a specific reinforcement amount, there is an optimum textile tex for each case, depending on the matrix mix design and the presence of intermediate layer. Similar results were obtained in one-way and two-way bending tests.

키워드

참고문헌

  1. ACI 544.1R-96 (2004), "State of the Art Report on Fiber Reinforced concrete", ACI Manual of Concrete Practice, Author, USA.
  2. ACI 325.10R-99 (2004), "State of the Art Report on Roller Compacted Concrete Pavements", ACI Manual of Concrete Practice, Author, USA.
  3. ACI 211.3R-02 (2004), "Guide for Selecting Proportions for No-Slump Concrete", ACI Manual of Concrete Practice, Author, USA.
  4. Ashtankar, V.B. and Chore, H.S. (2014), "Development of design mix roller compacted concrete dam at middle vaitarana", Adv. Concrete Construct., 2(2), 125-144. https://doi.org/10.12989/acc.2014.2.2.125
  5. Angelakopoulos, H., Neocleous, K. and Pilakoutas, K. (2009), "Steel fiber reinforced roller-compacted concrete road", Int. Intersec., 6(1), 45-55.
  6. ASTM C33-03 (2004), "Standard Specification for Concrete Aggregates", Standard Designation C33-03 04.02.
  7. ASTM C1018-97 (2004), "Standard Test Method for Flexural Toughness and First-crack Strength of Fiber Reinforced Concrete (Using Beam with Third Point Loading)", Standard Designation C1018-97 04.02.
  8. ASTM C78-02 (2004), "Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)", Standard Designation C78-02 04.02.
  9. Banthia, N., Pigeon, M., Marchand, J. and Boisvert, J. (1992), "Permeability of roller compacted concrete", J. Mater. Civil Eng., 4, 27-40. https://doi.org/10.1061/(ASCE)0899-1561(1992)4:1(27)
  10. Benmokrane, B., Wang, P., Ton-That, T., Rahman, H. and Robert, J. (2002),"Durability of glass fiber-reinforced polymer reinforcing bars in concrete environment", J. Compos. Construct., 6(3), 143-153. https://doi.org/10.1061/(ASCE)1090-0268(2002)6:3(143)
  11. Bentur, A., Ben-Bassat, M. and Schneider, D. (1985), "Durability of glass-fiber-reinforced cements with different alkali-resistant glass fibers", J. Am. Ceramic Soc., 68(4), 203-208. https://doi.org/10.1111/j.1151-2916.1985.tb15298.x
  12. Cem-FIL(R) glass fiber, the solution for concrete reinforcement, 1999-2015 Owens Corning, http://www.cem-fil.com/.
  13. Delatte, N., Amer, N. and Storey, C. (2003), "Improved Management of RCC Pavement Technology", UTCA Report 01231, University Transportation Center for Alabama (UTCA).
  14. Dobrowolsky, J.A. (1998), "Concrete Construction Hand Book: Section 27.2.2. RCC Pavements", McGraw Hill: 27.11-27.20.
  15. Griffiths, R. and Ball, A. (2000), "An assessment of the properties and degradation behavior of glass fiber reinforced polyester polymer concrete", J. Compos. Sci. Tech., 60(14), 2747-2753. https://doi.org/10.1016/S0266-3538(00)00147-0
  16. Guodong, X. and Hannant, D.J. (1992), "Flexural behavior of combined polypropylene network and glass fiber reinforced cement", J. Cement Concrete Compos., 14(1), 51-61. https://doi.org/10.1016/0958-9465(92)90039-X
  17. Hegge, J. and Voss, S. (2008), "Investigation on the bearing behavior and application potential of textile reinforced concrete", J. Eng. Struct., 30(7), 2050-2056. https://doi.org/10.1016/j.engstruct.2008.01.006
  18. Holder, R. (1984), "Roller Compacted Concrete Pavement Tactical Equipment Hardstand, Line Item 434", Contract No. DACA83-C-0188, Fort Hood, Tex., Fort Worth District, Corps of Engineers.
  19. Kagaya, M., Suzuki, T., Kokubun, S. and Tokuda, H. (2001), "A study of mix proportions and properties of steel fiber reinforced roller-compacted concrete for pavements", Tran. Proc. JSCE, 50(669), 16.
  20. Logie, C.V. and Oliverson, J.E. (1987), "Burlington northern railroad international freight terminal", Concrete Int. Des. Constr., 9(2), 37-41.
  21. Madhkhan, M., Azizkhani, R. and Torki, M.E. (2011), "Roller compacted concrete pavements reinforced with steel and polypropylene fibers", Struct. Eng. Mech., 40(2), 149-165. https://doi.org/10.12989/sem.2011.40.2.149
  22. Madhkhan, M., Azizkhani, R. and Torki, M.E. (2012), "Effects of pozzolans together with steel and polypropylene fibers on mechanical properties of RCC pavements", J. Construct. Build. Mater., 26(1), 102-112. https://doi.org/10.1016/j.conbuildmat.2011.05.009
  23. Mirza, F.A. and Soroushian, P. (2002), "Effects of alkali-resistant glass fiber reinforcement on crack and temperature resistance of lightweight concrete", Cement Concrete Compos., 24(2), 223-227. https://doi.org/10.1016/S0958-9465(01)00038-5
  24. Piarc Technical Committee on Concrete Roads (1993), The Use of Roller Compacted Concrete for Roads.
  25. Piggott, R.W. and Eng, P. (1999), Roller Compacted Concrete Pavements.
  26. Sen, R., Mullins, G. and Salem, T. (2002), "Durability of E-glass/vinylester reinforcement in alkaline solution", ACI Structural Journal, 99(3), 369-375.
  27. Shah, S.P., Ludirdja, D., Daniel, J.I. and Mobasher, B. (1988), "Toughness durability of glass fiber reinforced concrete systems", ACI Mater. J., 85(5), 352-360.
  28. Tayabgi, S.D. and Okamoto, P.A. (1987), "Engineering Properties of Roller Compacted Concrete", Transportation Research Record 1136, Transportation Research Board, Washington, D.C..
  29. Tennis, P.D., Leming, M.L. and Akers, D.J. (2004), "Pervious Concrete Pavements (No. PCA Serial No. 2828)", Portland Cement Association, Skokie, IL.
  30. Wei, B., Cao, H. and Song, S. (2010), "Environmental resistance and mechanical performance of basalt and glass fibers", Mater. Sci. Eng. A, 527(18), 4708-4715. https://doi.org/10.1016/j.msea.2010.04.021
  31. Weichold, O. and Hojczyk, M. (2009), "Size effects in multifilament glass rovings: the influence of geometrical factors on their performance in textile-reinforced concrete", Textile Res. J., 79(16), 1438-1445. https://doi.org/10.1177/0040517508100628

피인용 문헌

  1. Mechanical properties and durability of roller compacted concrete pavement (RCCP) - a review vol.21, pp.7, 2015, https://doi.org/10.1080/14680629.2019.1579754