DOI QR코드

DOI QR Code

Microsurfacing Successes and Failures

마이크로서페이싱의 성공과 실패 사례

  • Received : 2014.11.27
  • Accepted : 2015.03.10
  • Published : 2015.04.15

Abstract

PURPOSES: This study set out to investigate the current state of microsurfacing in Texas and compared the results with the current state of the practice nationwide. METHODS: For this study, case studies were extracted from the existing literature and compared with the data obtained both from site visits by the research team and data obtained from a survey by Texas Department of Transportation (TxDOT) personnel. The successes and failures of microsurfacing are detailed and explanations of different issues are outlined. Forensic studies from Texas are included in the descriptions of those microsurfacings that failed when configured as part of the cape seals. RESULTS : Microsurfacing has been shown to be an effective pavement preservation technique when applied to an appropriate road, at an appropriate timing, and as a remedy for certain issues. The failures experienced in Texas can mostly be attributed to cape seals and an inability to recognize structurally faulty pavement. CONCLUSIONS : When applied to an appropriate road, at an appropriate timing, and as a remedy for certain issues, microsurfacing has been shown to perform well in numerous case studies. The majority of microsurfacing failures are the result of poor project selection, usually involving the treatment being applied to structurally unsound pavement.

Keywords

References

  1. Broughton, B. and Lee, S.-J. Microsurfacing in Texas, Texas Department of Transportation, 2012
  2. Chan, A, Keoleian, G, & Gabler, E. (2008). Evaluation of life-cycle cost analysis practices used by the michigan department of transportation. Journal of Transportation Engineering, 134(6), 236-245. https://doi.org/10.1061/(ASCE)0733-947X(2008)134:6(236)
  3. Chassiakos, A, Panagolia, C, & Theodorakopoulos, D. (2005). Development of decision-support system for managing highway safety. Journal of Transportation Engineering, 131(5), 364-373. https://doi.org/10.1061/(ASCE)0733-947X(2005)131:5(364)
  4. Chu, CY, & Durango-Cohen, P. (2008). Incorporating maintenance effectiveness in the estimation of dynamic infrastructure performance models. Computer-Aided Civil and Infrastructure Engineering, 23, 174-188. https://doi.org/10.1111/j.1467-8667.2008.00532.x
  5. Galehouse, L, Moulthrop, JS, & Hicks, RG. (2003). Principles of pavement preservation. TR News, September-October 2003, 4-15.
  6. Gransberg, D.D. and D.M.B. James, NCHRP Synthesis 342: Chip Seal Best Practices, Transportation Research Board of the National Academies, Washington, D.C., 2005, 124 pp.
  7. Gransberg, D.D., NCHRP Synthesis 411: Microsurfacing; a synthesis of highway practices, Transportation Research Board of the National Academies, Washington, D.C., 2010, 115 pp.
  8. Hesp, S, Soleimani, A, Subrmani, S, Phillips, T, & Smith, D. (2008). Asphalt pavement cracking: analysis of extraordinary life cycle variability in eastern and northeastern Ontario. International Journal of Pavement Engineering, 10(3), 209-227. https://doi.org/10.1080/10298430802343169
  9. Hicks, RG, Dunn, K, & Moulthrop, J. (1997). Framework for selecting effective preventative maintenance treatments for flexible pavements. Transportation Research Record, 1597, 1-10.
  10. Labi, S, & Sinha, K. (2003). Measures of short-term effectiveness of highway pavement maintenance. Journal of Transportation Engineering, 129(6), 673-683 https://doi.org/10.1061/(ASCE)0733-947X(2003)129:6(673)
  11. Labi, S, & Sinha, K. (2005). Life-cycle evaluation of highway preventative maintenance. Journal of Transportation Engineering, 131(10), 744-751. https://doi.org/10.1061/(ASCE)0733-947X(2005)131:10(744)
  12. Li, Z, & Madanu, S. (2009). Highway project level life-cycle benefit/cost analysis under certainty, risk, and uncertainty: methodology with case study. Journal of Transportation Engineering, 135(8), 516-526. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000012
  13. Pasupathy, R, Labi, S, & Sinha, K. (2007). Optimal reconstruction periods for stochastically deteriorating infrastructures. Computer-Aided Civil and Infrastructure Engineering, 22, 389-399. https://doi.org/10.1111/j.1467-8667.2007.00495.x
  14. Queiroz C, Haas R, & Cai Y. (1994). National economic development and prosperity related to paved road infrastructure. Transportation Research Record, 1455, 147-152.
  15. Syed IM, Freeman TJ, Smith RE. (1999). Effectiveness of highway maintenance treatments used in Texas, Symposium on Flexible Pavement Rehabilitation and Maintenance, ASTM STP 1349, 136-150.
  16. Takamura, K., K. P. Loka, and R. Wittlinger. (2001). Microsurfacing for Preventive Maintenance: Eco-Efficient Strategy. Proc., International Slurry Seal Association Annual Meeting, Maui, Hawaii.
  17. Yildirim, Y., Estakhri, C., & Dunn, B. (2011). Mnt 706: best practices of microsurfacing application. Austin, Tx: Texas Pavement Preservation Center.
  18. Yildirim, Y., Estakhri, C., Montgomery, P., & Dunn, B. (2011). Mnt 705: guidelines on the use of micro-surfacing. Austin, Tx: Texas Pavement Preservation Center.