DOI QR코드

DOI QR Code

Flow and Electricity Power Characteristics of Hydraulic Turbine for Power Generation with Geothermal Energy System

지열에너지 시스템을 적용한 발전용 수차의 유동과 전력 특성

  • Received : 2014.09.02
  • Accepted : 2014.12.04
  • Published : 2015.02.28

Abstract

Geothermal energy is used in various types, such as power generation, direct use, and geothermal heat pumps. Geothermal energy with high temperature have been used for power generation for more than a century. The purpose of the study is to investigate flow and electricity power characteristics of hydraulic turbine for power generation of geothermal heat pump type with closed-system. The differences between the four types of hydraulic turbine, are different from the blade shape, volume, angle and etc. In case of prototype(1), pressure at blade was reduced to 2.1 bar, the kinetic energy of blade increased by increasing flow velocity(4.1 m/s). The increase of flow velocity at the blade edge markedly appeared, to increase the kinetic energy of the rotating shaft. In case that gateway in hydraulic turbine was installed, operating torque and RPM(1,080) of the rotating shaft increased respectively. Although rotational speed of prototype(2) compared to prototype(1) was reduced, the power generation capacity was greater about 3.4 times to 97 W. The most power of 255W was generated from prototype (4).

Keywords

References

  1. J. S. Kim and C. K. Lee, 2007, "A Study of the Influence of Condensing Water Temperature on Low Temperature Geothermal Power Generation", Korea Society of Geothermal Energy Engineers, Vol. 3, No. 7, pp.17-23.
  2. J. L. Fannou, C. Rousseau, L. Lamarche and K. Stanislaw, 2014, "Experimental analysis of a direct expansion geothermal heat pump in heating mode" Energy and Buildings, Vol. 75, No. 4, pp. 290-300. https://doi.org/10.1016/j.enbuild.2014.02.026
  3. H. Hofmann, S. Weides, T. Babadagli, G. Zimmermann, I. Moeck, J. Majorowicz and M. Unsworth, 2014, "Potential for Enhanced Geothermal System in Alberta, Canada", Energy, Vol. 69, No. 6, pp. 578-591. https://doi.org/10.1016/j.energy.2014.03.053
  4. M. Bravi and R. Basosi, 2014, "Environmental Impact of Electricity from selected Geothermal Power Plants in Italy", Journal of Cleaner Production, Vol. 66, No. 2, pp. 301-308. https://doi.org/10.1016/j.jclepro.2013.11.015
  5. O. S. Kim, J. S. Choi and I. S. Kim, 2005, "Analysis of Hydraulics Power Characteristics according to Changable Design Conditions for Francis Turbines", The Korean Society for Power System Engineering, Vol. 9, No. 3, pp. 39-43.