DOI QR코드

DOI QR Code

A Study on the Drying Performance of the Flux Adhered to Photovoltaic Ribbon

플럭스가 점착된 솔라 리본 건조 연구

  • 조남철 (신안산대학교 기계과) ;
  • 전용한 (상지영서대학교 소방안전과) ;
  • 한상필 (상지영서대학교 소방안전과) ;
  • 김동춘 (국제대학교 자동차 기계계열) ;
  • 이채문 (유한대학교 기계공학과) ;
  • 전택종 ((주)미르솔라)
  • Received : 2014.12.01
  • Accepted : 2015.02.23
  • Published : 2015.02.28

Abstract

The photovoltaic ribbon attached the flux reduces the solar module manufacturing process and the pollution. This paper presents an analytical method for solving the continuous flux drying system of photovoltaic ribbon. Also, some experiments of the drying of photovoltaic ribbon are carried out in order to design the drying system. Numerical results indicate the air temperature, the air velocity, the air pressure and the timewise temperature variation of ribbon during drying process. In case of the drier process length is short, 400mm, the photovoltaic ribbon is wet. Thus, another study of drying system is necessary to improve the drying ability. As a result, multi-stage drier system is proposed and shown to be good drying ability.

Keywords

References

  1. Technology Roadmap: Solar Photovoltaic Energy - 2014 edition, OECD/IEA, September 2014.
  2. 김동춘, 신용호, 조남철, "지구환경과 에너지 이용기술", 도서출판 명원, 2010
  3. 전택종, 조남철, 이채문, "적층구조로 형성된 PCB형 태양전지용 BusBar의 성능에 관한 연구", 2012 한국태양에너지학회 춘계학술 논문집, pp. 102-107, 2012
  4. Jen Y, Liu, "Drying of Porous Materials in a Medium With Variable Potentials" Journal of Heat Transfer(ASME), Vol. 113, pp.757-762, 1991 https://doi.org/10.1115/1.2910628
  5. Ausgar mette, New Concepts for Front Side Metallization of industrial Silicon Solar Cell, Fraunhofer-Institut fur Solare Energie systems, 2007
  6. 최은지, 송영훈, 김경수, 강기환, 유권종, 안형근, 한득영, "리본성분과 soldering 조건에 따른 모듈의 전기적 특성", 2010 한국태양에너지학회 추계학술 논문집, pp. 189-193, 2010
  7. 김효재, 이영은, 이구, 강기환, 최병호, "태양전지 묘듈용 솔드 합금의 산화 특성", 한국태양에너지학회 논문집, Vol.34 No.1 pp. 99-105, 2014. https://doi.org/10.7836/kses.2014.34.1.098