참고문헌
- Colbourne, J.R., 1975, "Gear Shape and Theoretical Flow Rate in Internal Gear Pumps," Trans. of the CSME, Vol. 3, No. 4, pp. 215-223.
- Saegusa, Y., Urashima, K., Sugimoto, M., Onoda, M. and Koiso, T., 1984, "Development of Oil-pump Rotors With A Trochoidal Tooth Shape," SAE Paper No. 840454.
- Beard, J.E., Pennock, G.R. and Stanisic, M.M., 1989, "The Effects of the Design Parameters on the Generated Curvature and Displacement of Epitrochoidal Gerotor Pumps," SAE Paper No. 891831.
- Fabiani, M., Manco, S., Nervegna, N. and Rundo, M., 1999, "Modelling and Simulation of Gerotor Gearing in Lubricating Oil Pump," SAE, No. 1999-01-0626.
- Mimmi, G. and Pennacchi, P., 2000, "Nonundercutting Conditions in Internal Gears," Mech. Mach. Theory, Vol. 35, No. 4, pp. 477-490. https://doi.org/10.1016/S0094-114X(99)00028-2
- Demenego, A., Vecchiatio, D., Litvin, F.L., Nervegna, N. and Manco, S., 2002, "Design and Simulation of Meshing of a Cycloidal Pump," Mech. Mach. Theory, Vol. 37, No. 3, pp.311-332. https://doi.org/10.1016/S0094-114X(01)00074-X
- Lee, S. C. 2006, "Profile Design of the Inner Rotor of a Gerotor by the Composite Curve of Circular Arcs," Journal of the KSTLE, Vol. 22, No. 2, pp. 79-86.
- Ye, Z., Zhang, W., Huang, Q. and Chen, C., 2006, "Simple Explicit Formulae for Calculating Limit Dimensions to Avoid Undercutting in the Rotor of a Cycloid Rotor Pump," Mech. Mach. Theory, Vol. 41, No. 4, pp.405-414. https://doi.org/10.1016/j.mechmachtheory.2005.07.001
- Chang, Y.J., Kim, J.H., Jeon, C.H., Kim, C. and Jung, S.Y., 2007, "Development of an Integrated System for the Automated Design of a Gerotor Oil Pump," ASME Journal of Mechnical Design, Vol. 129, No. 10, pp.1099-1105. https://doi.org/10.1115/1.2757629
- Hsieh, C.F. and Hwang, J.H., 2007, "Geometric Design for a Gerotor Pump with High Area Efficiency," ASME Journal of Mechanical Design, Vol. 129, No. 12, pp. 1269-1277. https://doi.org/10.1115/1.2779887
- Sasaki, H., Inui, N., Shimada, Y. and Ogata, D., 2008, "Development of High Efficiency P/M Internal Gear Pump rotor(Megafloid Rotor)," Automotive SEI Technical Review, No. 66, pp.124-128.
- Choi, T. H., Kim, M. S., Lee, G. S., Jung, S. Y., and Kim, C., 2011,"Design of Gerotor Using Cycloid and Circular-Arc Curves," Trans. Korean Soc. Mech. Eng. A, Vol. 35, No. 3, pp. 241-250. https://doi.org/10.3795/KSME-A.2011.35.3.241
- Jung, S. Y., Kim, M. S. and Kim, C., 2011,"Development of a New Gerotor for Oil Pumps with Multiple Profiles (Ellipse1, Involute and Ellipse2)," J. of the KSPE, Vol. 28, No. 5, pp. 614-622.
- Bae, J. H., Bae W. B., Joo, W. T. and Kim, C., 2014, "Optimal Design of Rotor Profile of Internal Gear Pump for Noise Reduction," J. of the KSPE, Vol. 38, No. 3, pp. 295-302. https://doi.org/10.3795/KSME-A.2014.38.3.295
- Mimmi, G. and Pennacchi, P., 1997, "Internal Lobe Pump Design," Trans. of the CSME, Vol. 21, No.2, pp.109-121.
피인용 문헌
- Performance improvement of an oil pump: Design of port assembled with gerotor (2-ellipses-combined lobe) vol.17, pp.8, 2016, https://doi.org/10.1007/s12541-016-0124-7