References
- Kang, B-B (2004), "Study on the web based monitoring and output characteristic analysis of PCS for 10kW BIPV", Doctorate Thesis, University of Dongshin.
- Kang, T-W (2013), "Study on Thermal and Electrical Performance of Vertical Semi-Transparent BIPV Module According to Insulation", Master's Thesis, University of Kongju.
- Kwon, S-H (2010), "A Study on the Identification of As-Built Quality Control Points for the Free-Form Building Facade Panels", Master's Thesis, Seoul National University of Science and Technology.
- Kim, K-R (2008), "Comparison of Methodologies for Typical Meteorological Data Generation for Seoul in Korea", Master's Thesis, University of Ulsan.
- Kim, S-J (2012), "Prototype System to Support Array Design of Roof-Top Photovoltaics Based on 3D GIS", Doctorate Thesis, University of Seoul.
- Kim, H-R (2012), "Study on Electrical and Thermal Performance of BIPV Curtain Wall Systems", Master's Thesis, University of Kongju.
- Kim, H-I (2010), "Study on the Performance Analysis and Reliability Assessment for BIPV System", Doctorate Thesis, University of Inha.
- Moon, S-W (2011), "Study on the Designs Systemization of Architecture Using Parametric Technology", Master's Thesis, University of Ajou.
- Park, J-H (2014), "A Study on the Parametric Design Process for the Curved Surface Division of Irregular-Shaped Tall", Master's Thesis, University of Yeungnam.
- Park, H-S (2009), "study on a surface generation method of free-form architecture using a planar quadrilateral mesh technique", Master's Thesis, University of Hanyang.
- Seoul Special City Architecture Planning Division (2014), "guideline of Public Buildings".
- Solar & Energy (2011), "BIPV technology and market (2009-2015)", pp.24-25.
- Renewable Energy Center, "Supply obligation of renewable energy(RPS)system guide", Korea Energy Management Corporation, pp.1-273. 2012.
- Yang, H-B (2009), "study on the application of the BIPV system in building skin design", Master's Thesis, University of Yonsei.
- Yoo, H-C, Park, S-H, Kim, K-R (2008), "Comparison of Methodologies for Typical Meteorological Data Generation for Seoul", Korea Institute of Energy Research, 28(2), pp.10-18, 2008.
- Lee, S-W (2014), "A study on development of buildingintegrated solar power system performance", University of Pukyong.
- Ministry of Knowledge Economy (2008), "Development of the third-order new renewable energy technologies and use popular basic plan(2009-2030)".
- Han, M-J (2011), "The Design Method and Environmental Performance Evaluation for Unit Type BIPV in High Rise Buildings", Master's Thesis, University of Dankook.
- Han, J-K (2010), "A Study on Architectural Design Application of Photovoltaic System in Environment-Friendly Housing", Master's Thesis, University of Dongguk.
- Anton. J. V, Reinders. A. H. M. E, (2012) "Real-Time Irradiance Simulation for PV Products and Building Integrated PV in a Virtual Reality Environment", IEEE Journal of Photovoltaics, 2(3), pp.352-358. https://doi.org/10.1109/JPHOTOV.2012.2189937
- ANSI/ASHRAE, ANSI/ASHRAE Standard 140-2001, (2006) "Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs".
- Di Vincenzo. M. C, Infield. D, (2010) "Artificial Neural Network for real time modelling of photovoltaic system under partial shading", Sustainable Energy Technologies (ICSET), 2010 IEEE International Conference on, Kandy, Sri Langka, pp.1-5.
- Javier Monedero, (2006) "Parametric design : A review and some experiences", 15th CAADe-Conference Proceedings, Vienna University of Technology.
- Kolatan, Ferda, (2006) "Responsive Architecture through Parametric Design", New Kind of Science, University of Pennsylvania.
- Reich. N. H, Van Sark. W, Turkenburg. W. C, (2010) "Using CAD Software to Simulate PV Energy Yield ‐ The Case of Product Integrated Photovoltaic Operated under Indoor Solar Irradiation", Solar Energy, 84(8), pp. 1526-1537. https://doi.org/10.1016/j.solener.2010.05.015
- Woyte. A, Nijs. J, Belmans. R, (2003) "Partial Shadowing of Photovoltaic Arrays with Different System Configurations : Literature Review and Field Test Results", Solar Energy, 74(3), pp.217-233. https://doi.org/10.1016/S0038-092X(03)00155-5
- Zhaoyu Wang, Qian Ai, Da Xie, Chuanwen Jiang, (2011) "A Research on Shading and LCOE of Building Integrated Photovoltaic", Power and Energy Engineering Conference (APPEEC), 2011 Asia‐Pacific, Wuhan, China. pp.1-4.
- Eastman C, Teicholz P, Sacks R, Liston K, (2014) "BIM Handbook Second Edition", pp.52-92.
Cited by
- BIPV 설치 입면 디자인을 위한 BIM기반 설계 지원 모델에 관한 연구 vol.17, pp.6, 2017, https://doi.org/10.12813/kieae.2017.17.6.177
- 맞춤형 커튼월 패널의 꼭짓점 좌표데이터 전이를 통한 BIM 형태 구축 프로세스 모델 연구 - 라이노에서 레빗으로의 좌표데이터 전이를 중심으로 - vol.35, pp.11, 2015, https://doi.org/10.5659/jaik_pd.2019.35.11.69