DOI QR코드

DOI QR Code

Harmonic Motion-based Simulator Design for Multipurpose Sports Simulation

  • Yang, Jeong-Yean (Human and Robot Interaction Research Center, Korea Advanced Institute of Science and Technology)
  • 투고 : 2015.09.18
  • 심사 : 2015.11.10
  • 발행 : 2015.11.30

초록

This study proposes a sports simulation device with various harmonics generation. The proposed system is composed of 6 degrees of freedom simulator devices and three types of sports simulation such as walking, snowboard, and jet-ski. In this research, every joint movement is designed with a crank-and-slider mechanism, which is efficient for generating continuous curvature smoothly. Contrary to the conventional spatial simulator with linear actuators, harmonics generation and its spatial combinations become the crucial issue in this research. The harmonic pattern in each joint is modelled for generating smooth curvatures that are also superposed for achieving overall motions. In addition, the targeted motions of sports simulations have different physical factors of periodic gait motion, frictionless surface, and buoyant effects, which are respectively designed by integrating three dimensional graphics information.

키워드

참고문헌

  1. Kizir, S., and Z. Bingul, "Position Control and Trajectory Tracking of the Stewart Platform, Serial and Parallel Robot Manipulators- Kinematics," Dynamics, Control and Optimization, ISBN: 978-953.
  2. Advani, Sunjoo, Dean Giovannetti, and Michael Blum, "Design of a hexapod motion cueing system for the nasa ames vertical motion simulator," Lateral20.8 (2002): 16.
  3. Tsai, Lung-Wen, "Kinematics of a three-dof platform with three extensible limbs," Recent advances in robot kinematics, Springer Netherlands, pp. 401-410, 1996.
  4. Samsung Economic Research Institute, "The advent of the era of u-Health," 2007.
  5. Aminzadeh, Masoomeh, Ali Mahmoodi, and M. Sabzehparavar, "Dynamic analysis of a 3DoF Motion Platform," International Journal of Robotics: Theory and Application 1.1, 2009,.
  6. O.-H. Kwon, J-Y. Yang, C.-S. Lim, and D.-S. Kwon, "7-DOF Horseback Riding Simulator based on a crank mechanism with variable radius and Its Inverse Kinematics Solution," IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Besanon, France, pp. 204-109, 2014.
  7. C.-S. Lim, J.-Y. Yang, O.-H. Kwon, and D.-S. Kwon, "Passivity Mimicking Control for a XENMA Gait Rehabilitation Robot with Rimless Wheel Model," the 11th International Conference on Ubiquitous Robots and Ambient Intelligence, Kuala Lumpur, Malaysia, pp. 444-447, 2014.
  8. http://www.etherlab.org
  9. http://www.ode.org