References
- Young HM, Smith CT, Morton D. Comparative in vitro evaluation of two provisional restorative materials. J Prosthet Dent 2001;85:129-32. https://doi.org/10.1067/mpr.2001.112797
- Tjan AH, Castelnuovo J, Shiotsu G. Marginal fidelity of crowns fabricated from six proprietary provisional materials. J Prosthet Dent 1997;77:482-5. https://doi.org/10.1016/S0022-3913(97)70140-9
- Chen HL, Lai YL, Chou IC, Hu CJ, Lee SY. Shear bond strength of provisional restoration materials repaired with light-cured resins. Oper Dent 2008;33:508-15. https://doi.org/10.2341/07-130
- Hagge MS, Lindemuth JS, Jones AG. Shear bond strength of bis-acryl composite provisional material repaired with flowable composite. J Esthet Restor Dent 2002;14:47-52. https://doi.org/10.1111/j.1708-8240.2002.tb00147.x
- Bohnenkamp DM, Garcia LT. Repair of bis-acryl provisional restorations using flowable composite resin. J Prosthet Dent 2004;92:500-2. https://doi.org/10.1016/j.prosdent.2004.08.017
- Hammond BD, Cooper JR 3rd, Lazarchik DA. Predictable repair of provisional restorations. J Esthet Restor Dent 2009; 21:19-24. https://doi.org/10.1111/j.1708-8240.2008.00225.x
- Tanoue N, Matsumura H, Atsuta M. Comparative evaluation of secondary heat treatment and a high intensity light source for the improvement of properties of prosthetic composites. J Oral Rehabil 2000;27:288-93. https://doi.org/10.1046/j.1365-2842.2000.00507.x
- Murakami N, Wakabayashi N, Matsushima R, Kishida A, Igarashi Y. Effect of high-pressure polymerization on mechanical properties of PMMA denture base resin. J Mech Behav Biomed Mater 2013;20:98-104. https://doi.org/10.1016/j.jmbbm.2012.12.011
- Velazquez E, Vaidyanathan J, Vaidyanathan TK, Houpt M, Shey Z, Von Hagen S. Effect of primer solvent and curing mode on dentin shear bond strength and interface morphology. Quintessence Int 2003;34:548-55.
- Bausch JR, de Lange C, Davidson CL. The influence of temperature on some physical properties of dental composites. J Oral Rehabil 1981;8:309-17. https://doi.org/10.1111/j.1365-2842.1981.tb00505.x
- Lutz F, Phillips RW, Roulet JF, Setcos JC. In vivo and in vitro wear of potential posterior composites. J Dent Res 1984;63: 914-20. https://doi.org/10.1177/00220345840630062201
- Wendt SL Jr. The effect of heat used as secondary cure upon the physical properties of three composite resins. II. Wear, hardness, and color stability. Quintessence Int 1987;18:351-6.
- Covey DA, Tahaney SR, Davenport JM. Mechanical properties of heat-treated composite resin restorative materials. J Prosthet Dent 1992;68:458-61. https://doi.org/10.1016/0022-3913(92)90410-C
- Cook WD, Johannson M. The influence of postcuring on the fracture properties of photo-cured dimethacrylate based dental composite resin. J Biomed Mater Res 1987;21:979-89. https://doi.org/10.1002/jbm.820210804
- Wendt SL Jr. The effect of heat used as a secondary cure upon the physical properties of three composite resins. I. Diametral tensile strength, compressive strength, and marginal dimensional stability. Quintessence Int 1987;18:265-71.
- Ha JY, Kim SH, Kim KH, Kwon TY. Influence of the volumes of bis-acryl and poly(methyl methacrylate) resins on their exothermic behavior during polymerization. Dent Mater J 2011;30:336-42. https://doi.org/10.4012/dmj.2010-188
- Wendt SL Jr. Time as a factor in the heat curing of composite resins. Quintessence Int 1989;20:259-63.
- Ferracane JL, Condon JR. Post-cure heat treatments for composites: properties and fractography. Dent Mater 1992;8:290-5. https://doi.org/10.1016/0109-5641(92)90102-I
Cited by
- 수리된 비스 아크릴 복합 레진의 전단결합강도에 대한 지연시간, 표면처리, 수리 재료의 영향 vol.34, pp.2, 2018, https://doi.org/10.14368/jdras.2018.34.2.89