References
- Ayyildiz S, Soylu EH, Ide S, Kilic S, Sipahi C, Piskin B, Gokce HS. Annealing of Co-Cr dental alloy: effects on nanostructure and Rockwell hardness. J Adv Prosthodont 2013;5: 471-8. https://doi.org/10.4047/jap.2013.5.4.471
- Al Jabbari YS. Physico-mechanical properties and prosthodontic applications of Co-Cr dental alloys: a review of the literature. J Adv Prosthodont 2014;6:138-45. https://doi.org/10.4047/jap.2014.6.2.138
- Byrne G. Soldering in prosthodontics-an overview, part I. J Prosthodont 2011;20:233-43. https://doi.org/10.1111/j.1532-849X.2011.00691.x
- Yannikakis S, Prombonas A. Improving the fit of implant prosthetics: an in vitro study. Int J Oral Maxillofac Implants 2013;28:126-34. https://doi.org/10.11607/jomi.2346
- Barbi FC, Camarini ET, Silva RS, Endo EH, Pereira JR. Comparative analysis of different joining techniques to improve the passive fit of cobalt-chromium superstructures. J Prosthet Dent 2012;108:377-85. https://doi.org/10.1016/S0022-3913(12)60196-6
- Tiossi R, Rodrigues RC, de Mattos Mda G, Ribeiro RF. Comparative analysis of the fit of 3-unit implant-supported frameworks cast in nickel-chromium and cobalt-chromium alloys and commercially pure titanium after casting, laser welding, and simulated porcelain firings. Int J Prosthodont 2008;21:121-3.
- Rocha R, Pinheiro AL, Villaverde AB. Flexural strength of pure Ti, Ni-Cr and Co-Cr alloys submitted to Nd:YAG laser or TIG welding. Braz Dent J 2006;17:20-3. https://doi.org/10.1590/S0103-64402006000100005
- de Castro GC, de Araujo CA, Mesquita MF, Consani RL, Nobilo MA. Stress distribution in Co-Cr implant frameworks after laser or TIG welding. Braz Dent J 2013;24:147-51. https://doi.org/10.1590/0103-6440201302112
- Madhan Kumar S, Sethumadhava JR, Anand Kumar V, Manita G. Effects of conventional welding and laser welding on the tensile strength, ultimate tensile strength and surface characteristics of two cobalt-chromium alloys: a comparative study. J Indian Prosthodont Soc 2012;12:87-93. https://doi.org/10.1007/s13191-012-0118-9
- Zupancic R, Legat A, Funduk N. Tensile strength and corrosion resistance of brazed and laser-welded cobalt-chromium alloy joints. J Prosthet Dent 2006;96:273-82. https://doi.org/10.1016/j.prosdent.2006.08.006
- Baba N, Watanabe I, Liu J, Atsuta M. Mechanical strength of laser-welded cobalt-chromium alloy. J Biomed Mater Res B Appl Biomater 2004;69:121-4.
- Apotheker H, Nishimura I, Seerattan C. Laser-welded vs soldered nonprecious alloy dental bridges: a comparative study. Lasers Surg Med 1984;4:207-13. https://doi.org/10.1002/lsm.1900040213
- Huling JS, Clark RE. Compratative distortion in three-unit fixed prostheses joined by laser welding, conventioanl soldering, or casting in one piece. J Dent Res 1977;56:128-34. https://doi.org/10.1177/00220345770560020501
- Bertrand C, Le Petitcorps Y, Albingre L, Dupuis V. The laser welding technique applied to the non precious dental alloys procedure and results. Br Dent J 2001;190:255-7.
- Baba N, Watanabe I. Penetration depth into dental casting alloys by Nd:YAG laser. J Biomed Mater Res B Appl Biomater 2005;72:64-8.
- Al Jabbari YS, Koutsoukis T, Barmpagadaki X, El-Danaf EA, Fournelle RA, Zinelis S. Effect of Nd:YAG laser parameters on the penetration depth of a representative Ni-Cr dental casting alloy. Lasers Med Sci 2013 DOI 10.1007/s10103-013-1502-3.
- Watanabe I, Topham DS. Laser welding of cast titanium and dental alloys using argon shielding. J Prosthodont 2006;15: 102-7. https://doi.org/10.1111/j.1532-849X.2006.00082.x
- Bertrand C, le Petitcorps Y, Albingre L, Dupuis V. Optimization of operator and physical parameters for laser welding of dental materials. Br Dent J 2004;196:413-8; discussion 407. https://doi.org/10.1038/sj.bdj.4811138
- Wulfes H. Precision milling and partial denture constructions. 1st ed. Bremen Germany; Academia Dental; 2005. p.133-5.
- Nomoto R, Takayama Y, Tsuchida F, Nakajima H. Nondestructive three-dimensional evaluation of pores at different welded joints and their effects on joints strength. Dent Mater 2010;26:e246-52. https://doi.org/10.1016/j.dental.2010.08.006
- Watanabe I, Wallace C. Bond strength of gold alloys laser welded to cobalt-chromium alloy. Open Dent J 2008;2:109-13. https://doi.org/10.2174/1874210600802010109
- Srimaneepong V, Yoneyama T, Kobayashi E, Doi H, Hanawa T. Comparative study on torsional strength, ductility and fracture characteristics of laser-welded alpha+beta Ti-6Al- 7Nb alloy, CP Titanium and Co-Cr alloy dental castings. Dent Mater 2008;24:839-45. https://doi.org/10.1016/j.dental.2007.10.002
- Watanabe I, Benson AP, Nguyen K. Effect of heat treatment on joint properties of laser-welded Ag-Au-Cu-Pd and Co-Cr alloys. J Prosthodont 2005;14:170-4. https://doi.org/10.1111/j.1532-849X.2005.04040.x
- Simchi A, Pohl H. Effects of laser sintering processing parameters on the microstructure and densification of iron powder. Mat Sci Eng A-Struct 2003;359:119-28. https://doi.org/10.1016/S0921-5093(03)00341-1
- NaBadalung DP, Nicholls JI. Laser welding of a cobalt-chromium removable partial denture alloy. J Prosthet Dent 1998; 79:285-90. https://doi.org/10.1016/S0022-3913(98)70239-2
- Tiossi R, Falcao-Filho H, Aguiar Junior FA, Rodrigues RC, Mattos Mda G, Ribeiro RF. Modified section method for laser- welding of ill-fitting cp Ti and Ni-Cr alloy one-piece cast implant-supported frameworks. J Oral Rehabil 2010;37:359-63. https://doi.org/10.1111/j.1365-2842.2010.02063.x
- Nunez-Pantoja JM, Vaz LG, Nobilo MA, Henriques GE, Mesquita MF. Effects of laser-weld joint opening size on fatigue strength of Ti-6Al-4V structures with several diameters. J Oral Rehabil 2011;38:196-201. https://doi.org/10.1111/j.1365-2842.2010.02140.x
- Xin XZ, Chen J, Xiang N, Gong Y, Wei B. Surface characteristics and corrosion properties of selective laser melted Co- Cr dental alloy after porcelain firing. Dent Mater 2014;30:263-70. https://doi.org/10.1016/j.dental.2013.11.013
- Dharmar S, Rathnasamy RJ, Swaminathan TN. Radiographic and metallographic evaluation of porosity defects and grain structure of cast chromium cobalt removable partial dentures. J Prosthet Dent 1993;69:369-73. https://doi.org/10.1016/0022-3913(93)90182-N
- Al Jabbari YS, Koutsoukis T, Barmpagadaki X, Zinelis S. Metallurgical and interfacial characterization of PFM Co-Cr dental alloys fabricated via casting, milling or selective laser melting. Dent Mater 2014;30:e79-88.
- Quinn JB, Quinn GD. A practical and systematic review of Weibull statistics for reporting strengths of dental materials. Dent Mater 2010;26:135-47. https://doi.org/10.1016/j.dental.2009.09.006
- Takayama Y, Nomoto R, Nakajima H, Ohkubo C. Effects of argon gas flow rate on laser-welding. Dent Mater J 2012;31: 316-26. https://doi.org/10.4012/dmj.2011-158
Cited by
- The Effect of Argon Inert Gas on the Laser Welding Quality of Co-Cr and Ni-Cr Base Metal Alloys vol.14, pp.12, 2015, https://doi.org/10.4236/jbise.2021.1412038
- A comprehensive assessment of laser welding of biomedical devices and implant materials: recent research, development and applications vol.46, pp.2, 2015, https://doi.org/10.1080/10408436.2019.1708701