Biomaterials and Biomechanics in Bioengineering

  • 제2권4호
  • /
  • Pages.207-223
  • /
  • 2015
  • /
  • 2465-9835(pISSN)
  • /
  • 2465-9959(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Efficient non-linear analysis and optimal design of biomechanical systems

  • Shojaei, I. (Department of Biomedical Engineering, University of Kentucky) ;
  • Kaveh, A. (Centre of Excellence for Fundamental Studies in Civil Engineering, Iran University of Science and Technology) ;
  • Rahami, H. (School of Engineering Science, College of Engineering, University of Tehran) ;
  • Bazrgari, B. (Department of Biomedical Engineering, University of Kentucky)
  • 투고 : 2014.10.31
  • 심사 : 2015.04.24
  • 발행 : 2015.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper a method for simultaneous swift non-linear analysis and optimal design/posture of mechanical/biomechanical systems is presented. The method is developed to get advantages of iterations in non-linear analysis and/or generations in genetic algorithm (GA) for the purpose of efficient analysis within the optimal design/posture. The method is applicable for both size and geometry optimizations wherein material and geometry non-linearity are present. In addition to established mechanical systems, the method can solve biomechanical models of human musculoskeletal system. Optimization-based procedures are popular methods for resolving the redundancy at joints wherein the number of unknown muscle forces is far more than the number of equilibrium equations. These procedures involve optimization of a cost function(s) which is assumed to be consistent with the central nervous system's strategy when activating muscles to assure equilibrium. However, because of the complexity of biomechanical problems (i.e., due to non-linear biomaterial, large deformation, redundancy of the problem and so on) efficient analysis are required within optimization procedures as suggested in this paper.

키워드

참고문헌

  1. Arjmand, N. and Shirazi-Adl, A. (2005), "Biomechanics of changes in lumbar posture in static lifting", Spine, 30(23), 2637-2648. https://doi.org/10.1097/01.brs.0000187907.02910.4f
  2. Bathe, K.J. (1996), Finite Element Procedures, Englewood Cliffs, Prentice-Hall, NJ, USA.
  3. Bazrgari, B., Shirazi-Adl, A. and Arjmand, N. (2007), "Analysis of squat and stoop dynamic liftings: muscle forces and internal spinal loads", European Spine J., 16(5), 687-699. https://doi.org/10.1007/s00586-006-0240-7
  4. Dorigo, M., Maniezzo, V. and Colorni, A. (1996), "Ant system: optimization by a colony of cooperating agents. Systems, Man, and Cybernetics, Part B: Cybernetics", IEEE Trans., 26(1), 29-41. https://doi.org/10.1109/3477.484436
  5. Ezquerro, F., Simon, A., Prado, M. and Perez, A. (2004), "Combination of finite element modeling and optimization for the study of lumbar spine biomechanics considering the 3D thorax-pelvis orientation", Med. Eng. Phys., 26(1), 11-22. https://doi.org/10.1016/S1350-4533(03)00128-0
  6. Goel, V.K., Kong, W., Han, J.S., Weinstein, J.N. and Gilbertson, L.G. (1993), "A combined finite element and optimization investigation of lumbar spine mechanics with and without muscles", Spine, 18(11), 1531-1541. https://doi.org/10.1097/00007632-199318110-00019
  7. Kaveh, A., Kalateh-Ahani, M. and Fahimi-Farzam, M. (2013), "Constructability optimal design of reinforced concrete retaining walls using a multi-objective genetic algorithm", Struct. Eng. Mech., 47(2), 227-245. https://doi.org/10.12989/sem.2013.47.2.227
  8. Kaveh, A., Shojaei, I., Gholipour, Y. and Rahami, H. (2013), "Seismic design of steel frames using multi-objective optimization", Struct. Eng. Mech., 45(2), 211-232. https://doi.org/10.12989/sem.2013.45.2.211
  9. Kaveh, A., Shojaei, I. and Rahami, H. (2015), "New developments in the optimal analysis of regular and near-regular structures: decomposition, graph products, force method", Acta Mech., 226(3), 665-681. https://doi.org/10.1007/s00707-014-1194-1
  10. Kaveh, A. (2014), Computational Structural Analysis and Finite Element Methods, Springer verlag, Wien.
  11. Konak, A., Coit, D.W. and Smith, A.E. (2006), "Multi-objective optimization using genetic algorithms: A tutorial", Reliab. Eng. Syst. Saf., 91(9), 992-1007. https://doi.org/10.1016/j.ress.2005.11.018
  12. Lee, K.S. and Geem, Z.W. (2004), "A new structural optimization method based on the harmony search algorithm", Comput. Struct., 82(9), 781-798. https://doi.org/10.1016/j.compstruc.2004.01.002
  13. Marler, R.T. and Arora, J.S. (2004), "Survey of multi-objective optimization methods for engineering", Struct. Multidiscip. Optim., 26(6), 369-395. https://doi.org/10.1007/s00158-003-0368-6
  14. Rahami, H., Kaveh, A. and Gholipour, Y. (2008), "Sizing, geometry and topology optimization of trusses via force method and genetic algorithm", Eng. Struct., 30(9), 2360-2369. https://doi.org/10.1016/j.engstruct.2008.01.012
  15. Rahami, H., Kaveh, A. and Shojaei, I. (2015), "Swift analysis for size and geometry optimization of structures", Adv. Struct. Eng., 18(3), 365-380. https://doi.org/10.1260/1369-4332.18.3.365
  16. Shojaei, I., Kaveh, A. and Rahami, H. (2013), "Analysis of structures convertible to repeated structures using graph products", Comput. Struct., 125, 153-163 https://doi.org/10.1016/j.compstruc.2013.04.018
  17. Shojaei, I., Rahami, H. and Kaveh, A. (2015), "Efficient finite element solution of regular and near-regular systems using graph products", Acta Mech., DOI 10.1007/s00707-015-1337-z.
  18. Stokes, I.A. and Gardner-Morse, M. (2001), "Lumbar spinal muscle activation synergies predicted by multicriteria cost function", J. Biomech., 34(6), 733-740. https://doi.org/10.1016/S0021-9290(01)00034-3
  19. Wang, M.Y., Wang, X. and Guo, D. (2003), "A level set method for structural topology optimization", Comput. Methods Appl. Mech. Eng., 192(1), 227-246. https://doi.org/10.1016/S0045-7825(02)00559-5
  20. Zingoni, A. (2002), Group-theoretic applications in solid and structural mechanics: a review in Computational structures technology, Civil-Comp Press.
  21. Zingoni, A. (2009), "Group-theoretic exploitations of symmetry in computational solid and structural mechanics", Int. J. Numer. Meth. Eng., 79(3), 253-289. https://doi.org/10.1002/nme.2576
  22. Zingoni, A. (2014), "Group-theoretic insights on the vibration of symmetric structures in engineering", Phil. Trans. R. Soc. A, 372(2008), 20120037. https://doi.org/10.1098/rsta.2012.0037