모발의 나노 트라이볼러지 특성해명을 위한 원자현미경(Atomic Force Microscopy) 프로브의 개발

A New Design of AFM Probe for Nanotribological Characterizations Measurement of Human Hair

  • 권현규 (금오공과대학교 기계시스템공학과) ;
  • 고언위 (금오공과대학교 기계시스템공학과)
  • Kweon, Hyun Kyu (Department of Mechanical System, Kumoh National Institute of Technology) ;
  • Gao, Yan Wei (Department of Mechanical System, Kumoh National Institute of Technology)
  • 투고 : 2015.08.31
  • 심사 : 2015.10.30
  • 발행 : 2015.12.31

초록

People are always pursuing the aesthetic feeling relentlessly. But some people have such problems with their hairs like alopecia, cancer chemotherapy, burns, and scalp injury. So the synthetic hair has played a very important role to make up for these deficiencies. But long term use can lead to adverse reactions or uncomfortable feeling. This is primarily caused by its properties differ with human hair. In particular, nanotribological characterizations (roughness, friction force and adhesive force) of synthetic hair surface are dissatisfy with the needs of normal hairs. This paper presents the experiments on nanotribological characterizations measurements of human hairs (coloring hair, permed hair and common hair) in shampooing condition or without shampooing condition. Using atomic force microscopy (AFM) to find out a range of synthetic hair nanotribological characterizations which can correspond with natural hair. The measurements of nanotribological characterizations focus on surface roughness, friction force and adhesive force, and a new design of AFM probe was used for measuring the nanotribological characterizations.

키워드

참고문헌

  1. B. Bhushan, Principles and applications of tribology, Wiley, New York, (1999).
  2. G. Binnig, C. F. Quate, C. Gerber, "Atomic force microscope," Physical Review Letters, 56, pp. 930-933, (1986). https://doi.org/10.1103/PhysRevLett.56.930
  3. M. Radmacher, "Measuring the elastic properties of biological samples with the AFM," IEEE Eng. Med.Biol. Mag., 16(2), pp. 47-57, (1997). https://doi.org/10.1109/51.582176
  4. B. Bhushan, Handbook of micro/nanotribology, CRC Press, Boca Raton, FL, (1999).
  5. B. Bhushan, Introduction to tribology, Wiley, New York, (2002).
  6. J. A. Swift, J. R. Smith, "Atomic force microscopy of human hair scanning." Journal of Microscopy, 22(5), pp. 310-318, (2000).
  7. D. R. Clarke, "Transmission scanning electron microscopy," Journal of Materials Science, 8(2), pp 279-285, (1973). https://doi.org/10.1007/BF00550677
  8. G. Binnig, H. Rohrer, "Scanning tunneling microscopy," IBM Journal of Research and Development, 30, pp. 355-369, (1986).
  9. R. McMullen, S. Kelty, "Investigation of human hair fibers using lateral force microscopy," Scanning, 23(5), pp. 337-345, (2001). https://doi.org/10.1002/sca.4950230507
  10. B. Bhushan (Ed.), Springer handbook of nanotechnology, Springer, Heidelberg, Germany, (2004).
  11. W. A. Ducker, T. J. Senden, R. M. Pashley, "Direct measurement of colloidal forces using an atomic force microscope," Nature, 353(6341), pp. 239-241, (1991). https://doi.org/10.1038/353239a0
  12. J. W. Krozel, D. A. Saville, "Electrostatic interactions between two spheres: solutions of the Debye-Huckel equation with a charge regulation boundary condition," Journal of Colloid and Interface Science, 150(2), pp. 365-373, (1992). https://doi.org/10.1016/0021-9797(92)90206-2
  13. R. Gates, M. Reitsma, "Precise atomic force microscope cantilever spring constant calibration using a reference cantilever array," Rev. Sci. Instr., 78, 086101, (2007). https://doi.org/10.1063/1.2764372