Earthquakes and Structures

  • 제8권1호
  • /
  • Pages.77-100
  • /
  • 2015
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Optimality criteria based seismic design of multiple tuned-mass-dampers for the control of 3D irregular buildings

  • Daniel, Yael (Department of Civil Engineering, University of Toronto) ;
  • Lavan, Oren (Faculty of Civil and Environmental Engineering, Technion- Israel Institute of Technology)
  • 투고 : 2014.02.26
  • 심사 : 2014.06.13
  • 발행 : 2015.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

Multiple tuned mass dampers (MTMDs) tuned to various frequencies have been shown to efficiently control the seismic response of structures where multiple modes are dominant. One example is irregular structures that are found more vulnerable than their symmetric counterparts. With the technology of MTMDs available, design and optimal design methodologies are required for application. Such a methodology, in the form of an analysis/redesign (A/R) scheme, has been previously presented by the authors while limiting responses of interest to allowable values, i.e., performance-based design (PBD). In this paper, the A/R procedure is modified based on formal optimality criteria, making it more cost efficient, as well as more computationally efficient. It is shown that by using the methodology presented herein, a desired performance level is successfully targeted by adding near-optimal amounts of mass at various locations and tuning the TMDs to dampen several of the structure's frequencies. This is done using analysis tools only.

키워드

참고문헌

  1. Ahlawat, A.S. and Ramaswamy, A. (2003), "Multiobjective optimal absorber system for torsionally coupled seismically excited structures", Eng. Struct., 25, 941-950. https://doi.org/10.1016/S0141-0296(03)00038-5
  2. Almazan, J.L. Espinoza, G. and Aguirre, J.J. (2012), "Torsional balance of asymmetric structures by means of tuned mass dampers", Eng. Struct., 42, 308-328. https://doi.org/10.1016/j.engstruct.2012.04.034
  3. Bakre, S.V. and Jangid, R.S. (2007), "Optimum parameters of tuned mass damper for damped main system", Struct.Control Health Monit., 14, 448-470. https://doi.org/10.1002/stc.166
  4. Bazaraa, M.S. and Shetty, C.M. (1979), Nonlinear programming. Theory and algorithms, John Wiley & Sons.
  5. Chen, G. and Wu, J. (2001), "Optimal placement of multiple tune mass dampers for seismic structures", ASCE J. Struct. Eng., 127(9), 1054-1062. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:9(1054)
  6. Cilley, F.H. (1900), "The exact design of statically indeterminate frameworks, an exposition of its possibility but futility", ASCE, Transact., 43, 353-407.
  7. Clark, A.J. (1988), "Multiple passive tuned mass dampers for reducing earthquake induced building motion", Proceedings of the 9th World Conference on Earthquake Engineering, Tokyo-Kyoto, Japan.
  8. Clough, R.W. and Penzien, J. (1995), Dynamics of Structures, 3rd Edition, Computers & Structures, Inc.
  9. Daniel, Y. and Lavan, O. (2011), "Seismic design methodology for control of 3D buildings by means of multiple tuned-mass-dampers", Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2011), Island of Corfu, Greece, May 2011, Paper No. 147.
  10. Daniel, Y. and Lavan, O. (2013), "Approximated gradient based seismic control of 3D irregular buildings using multiple tuned-mass-dampers", World Congress on Advances in Structural Engineering and Mechanics (ASEM13), Island of Jeju, Korea, September.
  11. Daniel, Y. and Lavan, O. (2014), "Gradient based optimal seismic retrofitting of 3D irregular buildings using multiple tuned mass dampers", Comput. Struct., 139, 84-97. https://doi.org/10.1016/j.compstruc.2014.03.002
  12. Den-Hartog, J.P. (1940), Mechanical Vibrations, 2nd Edition, McGraw-Hill Book Company, Inc.
  13. Desu, N.B., Deb, S.K. and Dutta, A. (2006), "Coupled tuned mass dampers for control of coupled vibrations in asymmetric buildings", Struct. Control Hlth. Monit., 13, 897-916. https://doi.org/10.1002/stc.64
  14. Desu, N.B., Dutta, A. and Deb, S.K. (2007), "Optimal assessment and location of tuned mass dampers for seismic response control of a plan-asymmetric building", Struct. Eng. Mech., 26(4), 459-477. https://doi.org/10.12989/sem.2007.26.4.459
  15. Fajfar, P. and Krawinkler, H. (1997), Seismic Design Methodologies for the Next Generation of Codes, Balkema, Rotterdam, 1997.
  16. FEMA 356 (2000), Pre-standard and Commentary for the Seismic Rehabilitation Buildings, Federal Emergency Management Agency, Washington DC.
  17. Fu, T.S. and Johnson, E.A. (2009), "Control strategies for a distributed mass damper system", Proceedings of the American Control Conference, St. Louis, MO, USA, June.
  18. Fu, T.S. and Johnson, E.A. (2011), "Distributed mass damper system for integrating structural and environmental control in buildings", J. Eng. Mech., 137(3) 205-213. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000211
  19. Hadi, M.N.S. and Arfiadi, Y. (1998), "Optimum design of absorber for MDOF structures", J. Struct. Eng., 124(11), 1272-1280. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:11(1272)
  20. Haftka R.T. and Gurdal, Z. (1992), Elements of Structural Optimization, 3rd Edition, Dordrecht, Kluwer Academic.
  21. Jangid, R.S. and Datta, T.K. (1997), "Performance of multiple tuned mass dampers for Torsionally coupled system", Earthq. Eng. Struct. Dyn., 26, 307-317. https://doi.org/10.1002/(SICI)1096-9845(199703)26:3<307::AID-EQE639>3.0.CO;2-8
  22. Kasai, K., Pu, W. and Wada, A. (2012), "Response of passively-controlled tall buildings in Tokyo during 2011 Great East Japan Earthquake", Proceedings of the 15th World Conference on Earthquake Engineering, Lisbon, Portugal.
  23. Kwakernaak, H. and Sivan, R. (1972), Linear Optimal Control Systems, John Wiley & Sons, Inc.
  24. Lavan, O. and Amir, O. (2014), "Simultaneous topology and sizing optimization of viscous dampers in seismic retrofitting of 3D irregular frame structures", Earthq, Eng. Struct. Dyn., 43(9), 1325-1342. https://doi.org/10.1002/eqe.2399
  25. Lavan, O. and Daniel, Y. (2013), "Full resources utilization seismic design of irregular structures using multiple tuned mass dampers", J. Struct. Multidiscip. O., 43(3), 517-532.
  26. Lavan, O. and Levy, R. (2005), "Optimal design of supplemental viscous dampers for irregular shear-frames in the presence of yielding", Earthq. Eng. Struct. Dyn., 34, 889-907. https://doi.org/10.1002/eqe.458
  27. Lavan, O. and Levy, R. (2006), "Optimal peripheral drift control of 3D irregular framed structures using supplemental viscous dampers", J. Earthq. Eng., 10, 903-923.
  28. Lavan, O. and Levy, R. (2010), "Performance based optimal seismic retrofitting of yielding plane frames using added viscous damping", Earthq. Struct., 1, 307-326. https://doi.org/10.12989/eas.2010.1.3.307
  29. Levy, R. and Lavan, O. (2006), "Fully stressed design of passive controllers in framed structures for seismic loadings", J. Struct. Multidiscip. O., 32, 485-498. https://doi.org/10.1007/s00158-005-0558-5
  30. Lee, C.L., Chen, Y.T., Chung, L.L. and Wang, Y.P. (2006), "Optimal design theories and applications of tuned mass dampers", Eng. Struct., 28, 43-53. https://doi.org/10.1016/j.engstruct.2005.06.023
  31. Li, C. and Qu, W. (2006), "Optimum properties of multiple tuned mass dampers for reduction of translational and torsional response of structures subject to ground acceleration", Eng. Struct., 28, 472-494. https://doi.org/10.1016/j.engstruct.2005.09.003
  32. Lin, C.C., Ueng, J.M. and Huang, T.C. (1999), "Seismic response reduction of irregular buildings using passive tuned mass dampers", Eng. Struct., 22, 513-524.
  33. Lin, C.C., Wang, J.F. and Ueng, J.M. (2001), "Vibration control of identification of seismically excited MDOF structure-PTMD systems", J. Sound Vib., 240(1), 87-115. https://doi.org/10.1006/jsvi.2000.3188
  34. Lin, J.L., Tsai, K.C. and Yu, Y.J. (2010), "Coupled tuned mass dampers for the seismic control of asymmetric-plan buildings", Earthq. Spectra, 26(3), 749-778. https://doi.org/10.1193/1.3435347
  35. Lin, J.L., Tsai, K.C. and Yu, Y.J. (2011), "Bi-directional coupled tuned mass dampers for the seismic response control of two-way asymmetric-plan buildings", Earthq. Eng. Struct. Dyn., 40, 675-690. https://doi.org/10.1002/eqe.1054
  36. Luft, R.W. (1979), "Optimum tuned mass dampers for buildings", ASCE J. Struct. Div., 105, 2766-2772.
  37. Luo, X., Ma, R., Li, G. and Zhao, D. (2009), "Parameter optimization of multi-mode vibration control system", International Conference of Measuring Technology and Mechatronics Automation, IEEE Computer Society, 685-688.
  38. McNamara, R.J. (1997), "Tuned mass dampers for buildings", ASCE J. Struct. Div., 103, 1785-1798.
  39. Pansare, A.P. and Jangid, R.S. (2003), "Tuned mass dampers for torsionally coupled systems", Wind Struct., 6, 23-40. https://doi.org/10.12989/was.2003.6.1.023
  40. Petti, L. and De Iuliis, M. (2009), "Robust design of a single tuned mass damper for controlling torsional response of asymmetric-plan systems", J. Earthq. Eng., 13, 108-128. https://doi.org/10.1080/13632460802347364
  41. Priestley, M.J.N. (2000), "Performance based seismic design", Proceedings of the 12th World Conference on Earthquake Engineering, Paper no. 2831.
  42. Priestley, M.J.N., Calvi, M.C. and Kowalsky, M.J. (2007), Displacement-Based Seismic Design of Structures, IUSS Press, Pavia.
  43. Pu, W., Kasai, K. and Kashima, T. (2012), "Response of conventional seismic-resistant tall buildings in Tokyo during 2011 great East Japan earthquake", Proceedings of the 15th World Conference on Earthquake Engineering, Lisbon, Portugal.
  44. Sadek, F., Mohraz, B., Taylor, A.W. and Chung, R.M. (1997), "A method of estimating the parameters of tuned mass dampers for seismic applications", Earthq. Eng. Struct. Dyn., 26, 617-635. https://doi.org/10.1002/(SICI)1096-9845(199706)26:6<617::AID-EQE664>3.0.CO;2-Z
  45. Schmitendorf, W.E. (2000), "Designing tuned mass dampers via static output feedback: A numerical approach", Earthq. Eng. Struct. Dyn., 29, 127-137. https://doi.org/10.1002/(SICI)1096-9845(200001)29:1<127::AID-EQE910>3.0.CO;2-Y
  46. Singh, M.P., Singh, S. and Moreschi, L.M. (2002), "Tuned mass dampers for response control of torsional buildings", Earthq.Eng. Struct. Dyn., 31, 749-769. https://doi.org/10.1002/eqe.119
  47. Soong, T.T. and Dargush, G.F. (1997), Passive Energy Dissipation Systems in Structural Engineering, John Wiley & Sons Ltd., Chichester.
  48. Takewaki, I. (1997), "Optimal damper placement for minimum transfer functions", Earthq. Eng. Struct. Dyn., 26(11), 1113-1124. https://doi.org/10.1002/(SICI)1096-9845(199711)26:11<1113::AID-EQE696>3.0.CO;2-X
  49. Takewaki, I. (2000a), "Soil-structure random response reduction via TMD-VD simultaneous use", Comput. Meth. Appl. Mech. Eng., 190, 677-690. https://doi.org/10.1016/S0045-7825(99)00434-X
  50. Takewaki, I. (2000b), "Optimal damper placement for planar building frames using tansfer functions", Struct. Multidiscip. O., 20(4), 280-287. https://doi.org/10.1007/s001580050158
  51. Takewaki, I., Yoshitomi, S., Uetani, K. and Tsuji, M. (1999), "Non-monotonic optimal damper placement via steepest direction search", Earthq. Eng. Struct. Dyn., 28(6), 655-670. https://doi.org/10.1002/(SICI)1096-9845(199906)28:6<655::AID-EQE833>3.0.CO;2-T
  52. Tso, W.K. and Yao, S. (1994), "Seismic load distribution in buildings with eccentric sSetback", Can. J. Civil Eng., 21, 50-62. https://doi.org/10.1139/l94-005
  53. Venanzi, I., Ubertini, F. and Materazzi, A.L. (2013), "Optimal design of an array of active tuned mass dampers for wind-exposed high-rise buildings", Struct. Control Hlth. Monit., 20, 903-917. https://doi.org/10.1002/stc.1502
  54. Warburton, G.B. (1982), "Optimum absorber parameters for various combinations of response and excitation parameters", Earthq. Eng. Struct. Dyn., 10, 381-401. https://doi.org/10.1002/eqe.4290100304
  55. Wang, J.F., Lin, C.C. and Lian, C.H. (2009), "Two-stage optimum design of tuned mass dampers with consideration of stroke", Struct. Control Hlth. Monit., 16, 55-72. https://doi.org/10.1002/stc.312
  56. Wiesner, K.B. (1979), "Tuned mass dampers to reduce building wind motion", ASCE Convention and Exposition, Boston, Mass, 1-21.
  57. Wirsching, P.H. and Campbell, G.W. (1974), "Minimal structural response under random excitations using vibration absorber", Earthq. Eng. Struct. Dyn., 2, 303-312.
  58. Zuo, L. and Nayfeh, S.A. (2004), "Minimax optimization of multi-degree-of-freedom tuned-mass dampers", J. Sound Vib., 272, 893-908. https://doi.org/10.1016/S0022-460X(03)00500-5

피인용 문헌

  1. Efficient Seismic Design of 3D Asymmetric and Setback RC Frame Buildings for Drift and Strain Limitation vol.143, pp.4, 2017, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001689
  2. Research developments in vibration control of structures using passive tuned mass dampers vol.44, 2017, https://doi.org/10.1016/j.arcontrol.2017.09.015
  3. Adjoint sensitivity analysis and optimization of hysteretic dynamic systems with nonlinear viscous dampers 2017, https://doi.org/10.1007/s00158-017-1858-2
  4. Multiple Pounding Tuned Mass Damper (MPTMD) control on benchmark tower subjected to earthquake excitations vol.11, pp.6, 2016, https://doi.org/10.12989/eas.2016.11.6.1123
  5. Multi-objective optimal design of tuned mass dampers vol.24, pp.11, 2017, https://doi.org/10.1002/stc.2008
  6. Seismic Behavior of Horizontally Irregular Structures: Current Wisdom and Challenges Ahead vol.68, pp.6, 2016, https://doi.org/10.1115/1.4034725
  7. Seismic Energy Assessment of Buildings with Tuned Vibration Absorbers vol.2018, pp.1875-9203, 2018, https://doi.org/10.1155/2018/2051687
  8. A retrofitting method for torsionally sensitive buildings using evolutionary algorithms vol.12, pp.3, 2017, https://doi.org/10.12989/eas.2017.12.3.309
  9. Self-control of high rise building L-shape in plan considering soil structure interaction vol.6, pp.3, 2015, https://doi.org/10.12989/csm.2017.6.3.229
  10. Seismic response control of base‐isolated buildings using multiple tuned mass dampers vol.28, pp.3, 2019, https://doi.org/10.1002/tal.1576
  11. Optimum design of a non-conventional multiple tuned mass damper for a complex power plant structure vol.15, pp.7, 2015, https://doi.org/10.1080/15732479.2019.1585461
  12. An efficient method for optimizing the seismic resistance of reinforced concrete frame structures vol.23, pp.4, 2015, https://doi.org/10.1177/1369433219878856
  13. Life-cycle cost-based optimization of MTMDs for tall buildings under multiple hazards vol.17, pp.7, 2021, https://doi.org/10.1080/15732479.2020.1778741