DOI QR코드

DOI QR Code

The Ballast for HID Lamps of Preventing the Overvoltage with a Long Distance Resonant Ignition

원거리 공진 기동시 과전압 방지 HID 안정기

  • Lee, Woo-Cheol (Hankyong National University Dept. of Electrical Electronic & Control Engineering, Institute for information technology convergence)
  • Received : 2014.10.20
  • Accepted : 2014.11.17
  • Published : 2015.01.31

Abstract

The electronic ballast for HID lamps needs to ignite lamps even though the length from the ballast to lamp is far away. Therefore, it needs to do the research on a resonant ignition to turn on the HID lamps because the reduction of ignition voltage is not much depending on the distance. However, the parasitic capacitance is increased depending the length of the cable, and it affects the resonant frequency. The ignitor voltage can be increased drastically under the resonant ignition through frequency sweep, and it is the main reason of blowing up. Therefore, the clamping diode is proposed to suppress the voltage of the primary winding during resonant ignition.

Keywords

References

  1. C-Y Park, K-N Kim, "Ignition Characteristics Analysis According to the Cable Length Between the Ignition and Lamp", Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, Vol. 23, No. 6, pp. 24-30 June 2009. https://doi.org/10.5207/JIEIE.2009.23.6.024
  2. D.H.J. van Casteren, M.A.M. Hendrix, "Improved current control for HID lamp drivers", IEEE IAS Annual Meeting, Vol.2, pp.1182-1187, Oct. 2005.
  3. D. Shmilovitz, S. Singer, "Pulsed Power Generation by Means of Transmission Lines", IEEE Transactions on Power Electronics, Vol. 18, No. 1, pp. 221-230, Jan. 2003. https://doi.org/10.1109/TPEL.2002.807136
  4. W. C. Lee, "Transient Current Control of Two-Stage Electronics Ballast for HID Lamps", Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, Vol. 28, No. 1, pp. 1-8, Jan. 2014. https://doi.org/10.5207/JIEIE.2014.28.1.001
  5. W. C. Lee, "Digital Control of Low-Frequency Square-Wave Two-Stage Electronic Ballast for HID Lamps with Resonant Ignition and High Efficiency", Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, Vol. 27, No. 2, pp. 1-8, Feb. 2013. https://doi.org/10.5207/JIEIE.2013.27.2.001
  6. R. Watson, G. C. Hua, and F. C. Lee, "Characterization of an Active Clamp Flyback Topology for Power Factor Correction Applications" IEEE Transactions on power electronics, Vol. 11, No. 1, pp. 191-198, Jan., 1996.
  7. G. Y. Jeong, K. H. Yoo, "Characteristics Analysis of the Ballast for HID Lamps According to Cable Length", Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, Vol. 20, No. 6, pp. 9-17, July. 2006. https://doi.org/10.5207/JIEIE.2006.20.6.009
  8. C. Y. Park, K. N. Kim, "Ignition Characteristics Analysis According to the Cable Length Between the Ignition and Lamp", Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, Vol. 23, No. 6, pp. 24-30, June. 2009. https://doi.org/10.5207/JIEIE.2009.23.6.024
  9. G. Y. Jeong, D. H. Yoo, "High Efficiency Resonant Asymmetrical Half-Bridge Flyback Converter", Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, Vol. 24, No. 4, pp. 81-94, Apr. 2010. https://doi.org/10.5207/JIEIE.2010.24.4.081