DOI QR코드

DOI QR Code

Meta-model-based Design Method for Frequency-domain Performance Reliability Improvement

주파수 영역에서의 성능 신뢰도 향상을 위한 메타 모델을 이용한 설계 방법

  • Son, Young Kap (Dept. of Mechanical & Automotive Engineering, Andong Nat'l Univ.)
  • 손영갑 (안동대학교 기계자동차공학과)
  • Received : 2014.06.09
  • Accepted : 2014.11.17
  • Published : 2015.01.01

Abstract

This paper proposes a design method for improving the frequency-domain performance reliability of dynamic systems with uncertain and degrading components. Discrete frequencies are used in this method as surrogates for the frequency band of interest, and the conformance of the frequency responses to the specification at these frequencies is utilized to model the frequency-domain performance reliability. A meta-model for the frequency responses, an extreme-value event, and the set-theory are integrated to improve the computational efficiency of the reliability estimation. In addition, a sample-based approach is presented to evaluate and optimize the estimated performance reliability. A case study of a vibration absorber system showed that the proposed design method has engineering applications.

본 논문은 변량 및 열화를 가지는 부품들로 구성된 동적 시스템에 대하여 주파수 영역에서 성능 신뢰도를 향상시키기 위한 설계방법을 제안한다. 제안하는 설계방법은 이산화한 주파수로 주파수 범위를 표현하고 각 주파수에서 응답의 규격 대비 순응도를 이용하여 주파수 영역에서의 성능 신뢰도를 모델링한다. 성능 신뢰도 추정시 계산 시간의 효율성을 높이기 위하여 주파수 응답에 대한 메타 모델과 극치값, 그리고 Set-theory를 적용한다. 또한 표본추출기법을 이용하여 추정한 성능 신뢰도를 평가하고 최적화할 수 있는 방법을 제시하였다. 진동저감 시스템의 설계에 적용하여 제안한 설계방법의 응용성을 나타낸다.

Keywords

References

  1. Styblinski, M. A., 1991, "Formulation of the Drift Reliability Optimization Problem," Microelectronics Reliability, Vol. 31, No. 1, pp. 159-171. https://doi.org/10.1016/0026-2714(91)90360-J
  2. Van den bogaard, J. A., Shreeram, J. and Brombacher, A. C., 2003, "A Method for Reliability Optimization Through Degradation Analysis and Robust Design," IEEE Proceedings of Reliability and Maintainability Symposium, Tampa, FL, USA, Jan. 27-30, pp. 55-62.
  3. Son, Y. K. and Savage, G. J., 2007, "Set Theoretical Formulation of Performance Reliability of Multiple Response Time-Variant Systems due to Degradations in System Components," Quality and Reliability Engineering International, Vol. 23, No. 2, pp. 171-188. https://doi.org/10.1002/qre.783
  4. Son, Y. K. and Savage, G. J., 2008, "A New Sample-Based Approach to Predict System Performance Reliability," IEEE Transactions on Reliability, Vol. 57, No.2, pp. 332-330.
  5. Son, Y. K., Chang, S. W. and Savage, G. J. 2007, "Economic-Based Design of Engineering Systems with Degrading Components Using Probabilistic Loss of Quality," Journal of Mechanical Science and Technology, Vol. 21, No. 2, pp. 234-243. https://doi.org/10.1007/BF02916283
  6. Son, Y. K., Kim, J.-J. and Shin, S.-J., 2009, "Non-Sample Based Parameters Design for System Performance Reliability," Journal of Mechanical Science and Technology, Vol. 23, pp. 2658-2667. https://doi.org/10.1007/s12206-009-0719-3
  7. Cooper, M. A., 2010, "Prediction of Uncertain Frequency Response Function Bounds Using Polynomial Chaos Expansion," Journal of Sound and Vibration, Vol. 329, No. 16, pp. 3348-3358. https://doi.org/10.1016/j.jsv.2010.01.008
  8. Kewlani, G., Crawford, J. and Iagnemma, K., 2012, "A Polynomial Chaos Approach to the Analysis of Vehicle Dynamics Under Uncertainty," Vehicle System Dynamics, pp. 1-26.
  9. Savage, J. Gordon, Seecharan, T. S. and Son, Y. K., 2013, "Probability-Based Prediction of Degrading Dynamic Systems," Journal of Mechanical Design, Vol. 135.
  10. Savage, J. G. and Son, Y. K., 2013, "Frequency Response Design of Uncertain Systems Using Performance Indices and Meta-Models," Journal of Sound and Vibration, Vol. 332, pp. 6949-6967. https://doi.org/10.1016/j.jsv.2013.08.039
  11. Li, J., Chen, J. and Fan, W., 2007, "The Equivalent Extreme-Value Event and Evaluation of the Structural System Reliability," Structural safety, 29, pp. 112-131. https://doi.org/10.1016/j.strusafe.2006.03.002
  12. Zang, C., Friswell, M. I. and Mottershead, J. E., 2005, "Robust Optimal Design and Its Application in Dynamics," Computers & Structures, Vol. 83, pp. 315-326. https://doi.org/10.1016/j.compstruc.2004.10.007
  13. Son, Y. K. and Savage, G. J., 2007, "Optimal Probabilistic Design of the Dynamic Performance of a Vibration Absorber," Journal Sound and Vibration, Vol. 307, pp. 20-37. https://doi.org/10.1016/j.jsv.2007.06.032