DOI QR코드

DOI QR Code

A Resistance Deviation-To-Time Interval Converter Based On Dual-Slope Integration

  • Shang, Zhi-Heng (Dept. of Semiconductor Engineering, Cheongju University) ;
  • Chung, Won-Sup (Dept. of Semiconductor Engineering, Cheongju University) ;
  • Son, Sang-Hee (Dept. of Semiconductor Engineering, Cheongju University)
  • Received : 2015.08.25
  • Accepted : 2015.11.05
  • Published : 2015.12.31

Abstract

A resistance deviation-to-time interval converter based on dual-slope integration using second generation current conveyors (CCIIs) is designed for connecting resistive bridge sensors with a digital system. It consists of a differential integrator using CCIIs, a voltage comparator, and a digital control logic for controlling four analog switches. Experimental results exhibit that a conversion sensitivity amounts to $15.56{\mu}s/{\Omega}$ over the resistance deviation range of $0-200{\Omega}$ and its linearity error is less than ${\pm}0.02%$. Its temperature stability is less than $220ppm/^{\circ}C$ in the temperature range of $-25-85^{\circ}C$. Power dissipation of the converter is 60.2 mW.

Keywords

References

  1. W.-S. Chung and K. Watanabe, "A temperature difference-to-frequency converter using resistance temperature detectors," IEEE Trans. Instrum. Meas, vol 39, no. 4, pp. 676-677, Aug. 1990. https://doi.org/10.1109/19.57259
  2. K. Mochizuki and K. Watanabe, "A high-resolution, linear resistance-to-frequency converter," IEEE Trans. Instrum. Meas, vol. 45, no. 3, pp.761-764, Jun. 1996. https://doi.org/10.1109/19.494596
  3. H. Q. Liu, T. H. Teo and Y. P. Zhang, "A low-power wide-range interface circuit for nanowire sensor array based on resistance-to-frequency conversion technique", ISIC 09. vol. 2, pp. 13-16, Dec. 2009.
  4. H. kim, W.-S. Chung, and H.-J. Kim, "A resistance deviation-to-pulsewidth converter for resistive sensors," IEEE Trans. Instrum. Meas, vol. 58, pp. 397-400, Feb. 2009. https://doi.org/10.1109/TIM.2008.2003318
  5. T. Islam, L. Kumar, Z. Uddin, and A. Ganguly, "Relaxation oscillator based active bridge circuit for linearly converting Resistance to frequency of resistive sensor," IEEE Sensors, vol. 13, pp. 1507-1513, May. 2013. https://doi.org/10.1109/JSEN.2012.2236646
  6. P. Kabara, S. Thakur, G. Saileshwar, M. S. Banghini, and D. K. Sharma, "CMOS low-noise signal conditioning with a novel differential "resistance to frequency" converter for resistive sensor applications," SoC Design Conference 2011 International, pp. 298-301, Nov. 2011.
  7. J.-G. Shin, and W.-S. Chung, "Resistance Deviation-to-Frequency Converter for Resistive Bridge Sensors," Journal of KIIT, Vol. 12, pp. 25-30, Dec. 2014
  8. L. G. Fasoli, F. R. Riedijk, and J. H. Huising, "A general circuit for resistive bridge sensors with bitstream output," IEEE Trans. Instrum. Meas, vol. 46, pp. 954-960, Aug. 1997. https://doi.org/10.1109/19.650807
  9. S. Vlassis and S. Siskos, "A signal conditioning circuit for piezoresistive pressure sensors with variable pulse-rate output," Analog Integrated Circuits and Signal Processing, vol. 23, pp. 153-162, 2000. https://doi.org/10.1023/A:1008398010538
  10. H.-S. Kim, J.-G. Shin, W.-S. Chung, and S.-H. Son, "A Resistance Deviation-To-Time Interval Converter Using Second Generation Current Conveyors," Computer Applications for Communication, Networking, and Digital Contents Communications in Computer and Information Science, Vol. 350, pp. 131-136, 2012. https://doi.org/10.1007/978-3-642-35594-3_18
  11. C. Toumazou. F. J. Lidgey, and D. G. Haigh, "Anaolog IC design: The current-mode approach," Peter Peregrinus Ltd., London, Ch. 15, Apr. 1990.

Cited by

  1. A Differential Current-to-Time Interval Converter Using Current-Tunable Schmitt Triggers vol.21, pp.4, 2017, https://doi.org/10.7471/ikeee.2017.21.4.375