DOI QR코드

DOI QR Code

2-Ethylhexanoic Acid의 폭발위험성에 관한 연구

Explosion Risk of 2-Ethylhexanoic Acid

  • 김원길 (부산광역시 부산진소방서) ;
  • 김정훈 (부경대학교 소방공학과) ;
  • 최재욱 (부경대학교 소방공학과)
  • Kim, Won-Kil (Busanjin Fire Station of Busan) ;
  • Kim, Jung-Hun (Dept. of Fire Protection Engineering, Pukyong National Univ.) ;
  • Choi, Jae-Wook (Dept. of Fire Protection Engineering, Pukyong National Univ.)
  • 투고 : 2015.08.05
  • 심사 : 2015.11.18
  • 발행 : 2015.12.31

초록

2-Ethylhexanoic acid는 플라스틱의 충격보강제를 제조하는 물질로서 공정 중에 폭발위험성을 고찰하기 위하여 산소농도 변화에 따른 폭발범위, 폭발압력, 최대폭발압력상승속도를 실험한 결과 실험온도 $100^{\circ}C$에서, 산소농도 40~70%에서 폭발하한농도 3.2%를 구하였으며, 산소농도 21%에서 폭발하한 농도는 4.0%, 폭발상한 농도는 4.5%를 구하였다. 또한, 2-ethylhexanoic acid의 폭발압력은 산소농도 70%에서 1.4161 MPa의 최대폭발압력을 나타내었으며, 최대폭발압력상승속도를 구한 결과 산소농도 70%에서 62.692MPa/s를 구하였다.

In order to examine the explosion risk of 2-ethylhexanoic acid, we experimentally studied the explosion limit, explosion pressure, and rate of increase of the explosion pressure at different oxygen concentrations. The lower explosion limit was 3.2% at a temperature of $100^{\circ}C$, and the oxygen concentration was 40 to 70%. The upper explosion limit was 4.5% and the lower explosion limit was 4.0% at an oxygen concentration of 21%.The maximum explosion pressure of 2-ethylhexanoic acid was 1.4161 MPa at an oxygen concentration of 70%, and the rate of increase of the explosion pressure was 62.692 MPa/s at this concentration.

키워드

참고문헌

  1. D. M. Ha, "Appropriateness of MSDS by Means of the Measurement of Combustible Properties of Anisole", Journal of Korean Institute of Fire Sci. & Eng., Vol. 29, No. 2, pp. 20-24 (2015).
  2. D. M. Ha, Y. S. Mok and J. W. Choi, "A Study on Flash Point of Flammable Substances", Journal of Korean Institute of Fire Sci. & Eng., Vol. 13, No. 1, pp. 11-19 (1999).
  3. J. W. Choi, "A Study on the Extinction Concentration of Inert Gas for Extinction Performance Estimation of Kerosene", Journal of the KOSOS, Vol. 22, No. 3, pp. 34-38 (2007).
  4. W. S. Lim and J. W. Choi, "Thermal Stability and Critical Ignition Temperature of RPF", Journal of Korean Institute of Fire Sci. & Eng., Vol. 22, No. 1, p. 99104 (2008).
  5. W. S Lim and J. W. Choi, "Measurements of Flame Temperature and Radiation Heat Flux from Pool Fire withy Petroleum Diesel Fuel", Journal of Korean Institute of Fire Sci. & Eng., Vol. 21, No. 3, pp. 78-83 (2007).
  6. Y. Aoyagi and T. Fujji, "Evaluation of CFD Model SIGMET-J as LNG Evaporation and Gas Dispersion Model", Journal of Japan Society for Safety Engineering, Vol. 40, No. 1, pp. 15-21 (2001).
  7. S. Otoshi "Risk Management and Risk Communication of Chemicals", Journal of Japan Society for Safety Engineering, Vol. 42, No. 1, pp. 44-50 (2003).
  8. KOSHA, /www.kosha.or.kr/chemical Information Guide KE-13740, CAS No. 149-57-5 (2014).
  9. I. G. Choi, I. K. Cho, Y. S. Mok, D. H. Lee, J. W. Choi and D. H. Ha, "The Measurement of Minimum Ignition Energy and Explosion Limit for Pine Tree Dust", Journal of the Korean Institute of Gas, Vol. 2, No. 2, pp. 55-60 (1998).
  10. W. S. Chang, "A Study on the Explosion Risk of LP Gas", Dept. of Safety Engineering, Graduate School of Industry, Pukyong National University, pp. 4-6 (2006).
  11. Y. M. Kim, "A Study on the Fire and Explosion by the Small Ignition Source and Characteristcs of Spontaneous Ignition of Organic Solvent", Dept. of Fire Protection Engineering, Graduate School of Industry, Pukyong National University, pp. 3-5 (2014).
  12. W. S. Lim, Y. S. Mok and J. W. Choi, "Ignition Temperture of Hydroxy Propyl Methyl Cellulose Dust Cloud", APSS, pp. 97-100 (2003).
  13. T. S. Boo, "A Study on the Combustion Concentration and Explosion Risk of P-Xylene", Dept. of Fire Protection Engineering, Graduate School of Industry, Pukyong National University, pp. 6-10 (2015).