DOI QR코드

DOI QR Code

Polyjet방식 3D 프린터를 이용한 스트레이트 베벨기어의 제작 특성에 관한 실험적 연구

Experimental Study on Production Characteristics of Straight Bevel Gear using a Polyjet Method 3D Printer

  • 김해지 (경남과학기술대학교 자동차공학과)
  • Kim, Hae-Ji (Department of Automotive Engineering, Gyeongnam National University of Science and Technology)
  • 투고 : 2015.09.03
  • 심사 : 2015.10.12
  • 발행 : 2015.12.31

초록

Recently, 3D printer technologies have been used in many research efforts for high precision manufacturing. In particular, the rapid prototyping technology has been developing rapidly, because it can be manufactured in a short time with a 3D designed shape. This paper relates to the production characteristics of the straight bevel gear designed using a 3D print using the PolyJet method. The characteristics of a 3D printed straight bevel gear were compared with a machined straight bevel gear. The accuracy of the produced straight bevel gear was evaluated by backlash, meshing pattern, face angle, root angle, and surface roughness.

키워드

참고문헌

  1. "What is the National Network for Manufacturing Innovation," (2015) http://manufacturing.gov/nnmi.html (accessed 1, Sep., 2015).
  2. Choi, J. W. and Kim, H. C., "3D Printing Technologies-A Review," J. Korean Soc. Manuf. Process Eng., Vol. 14, No. 3, pp. 1-8, 2015. https://doi.org/10.14775/ksmpe.2015.14.3.001
  3. Yun, H. Y., Ko, T. J. and Kim, H. C., " Development of Stereolithography Apparatus by using UV-LED," J. Korean Soc. Manuf. Process Eng., Vol. 13, No. 2, pp. 15-20, 2014. https://doi.org/10.14775/ksmpe.2014.13.2.015
  4. Jung, H. J., Lee, I. H., Kim, H. C. and Cho, H. Y., "Characteristics of Surface Lamination according to Nozzle Position in Liquid Direct Writing SFF," J. Korean Soc. Manuf. Process Eng., Vol. 13, No. 2, pp. 41-48, 2014. https://doi.org/10.14775/ksmpe.2014.13.2.041
  5. http://www.stratasys.co.kr (accessed 1, Sep., 2015).
  6. Lee, W. C., Wei, C. C. and Chung, S. C., "Development of a Hybrid Rapid Prototyping System using Low-cost Fused Deposition Modeling and Five-axis Machining," J. Mater. Process. Technol., Vol. 214, No. 11, pp. 2366-2374, 2014. https://doi.org/10.1016/j.jmatprotec.2014.05.004
  7. Ravari, M. R. K., Kadkhodaei, M., Badrossamay, M. and Rezaei, R., "Numerical Investigation on Mechanical Properties of Cellular Lattice Structures Fabricated by Fused Deposition Modeling," Int. J. Mech. Sci., Vol. 88, pp. 154-161, 2014. https://doi.org/10.1016/j.ijmecsci.2014.08.009
  8. Alberto, B. and Luana, B., "Roughness Prediction in Coupled Operations of Fused Deposition Modeling and Barrel Finishing," J. Mater. Process. Technol., Vol. 219, pp. 181-192, 2015. https://doi.org/10.1016/j.jmatprotec.2014.12.021
  9. Mahdi, K., Mohsen, B., Foroozmehr, E. and Etefagh, A. H., "Optimization of the Printing Parameters Affecting Dimensional Accuracy and Internal Cavity for HIPS Material Used in Fused Deposition Modeling Processes," J, Mater, Process, Technol., Vol. 226, pp. 280-286, 2015. https://doi.org/10.1016/j.jmatprotec.2015.07.012
  10. Carneiro, O. S., Silva, A. F. and Gomes, R., "Fused Deposition Modeling with Polypropylene," Mater. Des., Vol. 83, pp. 768-776, 2015. https://doi.org/10.1016/j.matdes.2015.06.053
  11. Pan, Y. Q., Zheng, R., Liu, F. B., Jing, W., Yong, C., Liang, X. Y. and Bing, W., "The Use of CT Scan and Stereo Lithography Apparatus Technologies in a Canine Individualized Rib Prosthesis," Int. J. Surg., Vol. 12, No. 1, pp. 71-75, 2014. https://doi.org/10.1016/j.ijsu.2013.10.006

피인용 문헌

  1. Infill Print Parameters for Mechanical Properties of 3D Printed PLA Parts vol.17, pp.4, 2018, https://doi.org/10.14775/ksmpe.2018.17.4.009
  2. 유성기어 주행감속기 치형의 마이크로 지오메트리 최적화에 관한 연구 vol.34, pp.6, 2015, https://doi.org/10.7736/kspe.2017.34.6.371
  3. A Study on the Gear Tooth Micro-Geometry Optimization of Angle Drive Unit vol.35, pp.5, 2015, https://doi.org/10.7736/kspe.2018.35.5.473
  4. A Study on the Design of Rear Wheel Drive Reducer for Electric Vehicle vol.35, pp.6, 2015, https://doi.org/10.7736/kspe.2018.35.6.571
  5. Effects of Friction Coefficient and Mesh Change on Cutting Force and Chip Shape in Cutting Simulation vol.28, pp.3, 2019, https://doi.org/10.7735/ksmte.2019.28.3.148
  6. 보행 장애인의 승차감 개선을 위한 휠체어용 능동형 서스펜션 시스템 개발 vol.41, pp.5, 2015, https://doi.org/10.9718/jber.2020.41.5.203
  7. Design and Analysis Robot Puzzle for Capacity 0.5 Kg vol.1125, pp.1, 2015, https://doi.org/10.1088/1757-899x/1125/1/012081