DOI QR코드

DOI QR Code

Study of Injection Molding Process of Shift Lever Using Injection Molding Analysis

사출성형해석을 통한 자동차 레버쉬프트의 사출공정에 관한 연구

  • Park, Chul-Woo (Daegu Mechatronics & Materials Institute, Machinery & Robot Research Division) ;
  • Lee, Boo-Youn (Dept. of Mechanical and Automotive Engineering, Keimyung University) ;
  • Lee, Sang-Min (Woojin High-Tech Co., Ltd.)
  • Received : 2015.02.02
  • Accepted : 2015.09.11
  • Published : 2015.12.31

Abstract

The production processes were reviewed through the injection analysis of the shift lever as a core component of an auto lever installed in the automatic transmission of cars. The injection analysis was carried out for the shift lever and rod among the components in a shift lever module. The shift lever and rod are designed for injection molding with the insertion of a tube, a pin cable plate, and a steel rod for securing the strength of the product. The charging time, failure of injection molding, weld line, air trap, and deformation were reviewed according to this insert. Analyses on various gate positions were carried out for reviewing the cultivation and deformation of fiber around major components, such as the generation section of manipulation feeling and assembly section, so that optimal gate conditions might be reviewed and reflected in the mold design. Finally, we plan to compare the analysis results with the production of trial products.

Keywords

References

  1. Kim, H. P. and Kim, Y. J., "A Study on the Effects of Filling and Packing Phases on the Injection Molding," KSMTE Annual Autumn Conference 2015, Vol. 1, No. 1, pp. 112-118, 2002.
  2. Kim, O. R., Cha, B. S., Lee, S. Y., Kim, Y. G. and Woo, C. K., "A Study on the Runner and Gate Consequence of Manufacture Double Shot Molding using CAE," Trans. Mater. Process., Vol. 18, No. 2, pp. 160-166, 2009. https://doi.org/10.5228/KSPP.2009.18.2.160
  3. Choi, H. J, Park, C. W and Choi, S. D., "Analyses on Deformation Patterns Depending on the Injection Process for Rear Lamp Reflectors of automotive," J. Korean Soc. Manuf. Process Eng., Vol. 9 No. 4, pp. 32-37, 2010.
  4. Park, C. W., "A Study on the Injection Molding Process of the Case of Drum Type Washer Using Moldflow," J. Korean Soc. Mar. Eng., Vol. 33, No 1, pp. 90-96, 2009. https://doi.org/10.5916/jkosme.2009.33.1.90
  5. Lee, D. G., Park, M. W. and Ahn, D. G., , "Design of Cooling System of Over-molding Mold for Socket Component of Automobile Wiper," Trans. Korean Soc. Mech. Eng. A, Vol. 35 No. 12, pp. 1635-1640, 2011. https://doi.org/10.3795/KSME-A.2011.35.12.1635